Difference between revisions of "Category:1115 Polyethylene Plastic Pipe Liner"
Jump to navigation
Jump to search
(info from material manual) |
m (article construction) |
||
| Line 1: | Line 1: | ||
| + | {|style="padding: 0.3em; margin-left:1px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right" | ||
| + | |- | ||
| + | |'''MGS Information''' | ||
| + | |- | ||
| + | |[http://www.modot.mo.gov/business/materials/pdf/mgs/MGSINDEX.pdf Current General Services Specifications (MGS) By Subject] | ||
| + | |} | ||
| + | |||
This article establishes procedures for inspecting and reporting of polyethylene plastic pipe liners. The specification requirements are set forth in the bid request issued by General Services. | This article establishes procedures for inspecting and reporting of polyethylene plastic pipe liners. The specification requirements are set forth in the bid request issued by General Services. | ||
Revision as of 12:01, 29 October 2007
| MGS Information |
| Current General Services Specifications (MGS) By Subject |
This article establishes procedures for inspecting and reporting of polyethylene plastic pipe liners. The specification requirements are set forth in the bid request issued by General Services.
1115.1 Procedure
Field inspection is to follow the procedures laid out in 1046 Pipe Liner.
1115.2 Report
The report of this material will be made in SiteManager following 106.9 Reporting Test Results.
General Services may require a hard copy of the SiteManager report as proof of acceptance of this material. Inspectors should communicate with General Services to assure their payment procedures are satisfied and to ensure the materials requirements as satisfied on a per purchase order basis.
