Difference between revisions of "Category:1130 Traffic Signal Lamps"
m (→1130.2.2 Sample Record: minor clarification to differentiate EPG articles (that are referenced as "articles", not "sections") from specifications (that are referenced as "sections")) |
m (→1130.2.2 Sample Record: updated link) |
||
| Line 19: | Line 19: | ||
===1130.2.2 Sample Record=== | ===1130.2.2 Sample Record=== | ||
| − | The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106. | + | The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab. |
Revision as of 12:19, 1 July 2010
| MGS Information |
| Current General Services Specifications (MGS) By Subject |
This article establishes procedures for inspecting and sampling traffic signal lamps purchased to comply with the bid request issued by MoDOT.
Contents
1130.1 Procedure
Refer to Signal Bulb Inspection Process.
1130.2 Laboratory Testing Guidelines
This article establishes procedures for sampling, testing and reporting traffic signal lamps purchased to comply with the bid request issued by MoDOT.
1130.2.1 Testing
Samples shall be subjected to a Laboratory visual examination to determine compliance for light center length, markings, position of burning, bulb type, base type, and filament type. Manufacturer's certifications shall be checked for compliance with all requirements of the bid request. Data on Laboratory findings shall be recorded in Laboratory workbooks. This information shall then be recorded through SiteManager.
1130.2.2 Sample Record
The sample record shall be completed in SiteManager, as described in Automation Section 3510, and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.
