Difference between revisions of "1047.9 Laboratory Testing Guidelines for Sec 1047"
Jump to navigation
Jump to search
(info from lab manual) |
m (article construction) |
||
| Line 5: | Line 5: | ||
==1047.6.2 Sample Record== | ==1047.6.2 Sample Record== | ||
| − | The sample record shall be completed in SiteManager, as described in [ | + | The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab. |
[[Category:1047 Corrugated Polyethylene Culvert Pipe]] | [[Category:1047 Corrugated Polyethylene Culvert Pipe]] | ||
Revision as of 09:33, 21 February 2008
This article establish procedures for laboratory testing and reporting samples of corrugated polyethylene culvert pipe. Refer to Sec 1047 for MoDOT’s specifications.
1047.6.1 Procedure
Tests consist of workmanship, pipe dimensions, pipe stiffness, pipe flattening, brittleness, and environmental stress cracking. All tests shall be conducted in accordance with AASHTO M 294.
1047.6.2 Sample Record
The sample record shall be completed in SiteManager, as described in Automation Section 3510, and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in 106.9 Reporting Test Results, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.
