Difference between revisions of "902.21 Laboratory Testing Guidelines for Sec 902"
m (article construction) |
m (minor clarifications) |
||
| Line 7: | Line 7: | ||
===902.15.1.2 Physical Tests=== | ===902.15.1.2 Physical Tests=== | ||
| − | Samples of bolts and nuts shall be tested according to [[:Category:712 Structural Steel Construction#712.3.2.2 Physical Tests - Bolts and Nuts|712.3.2.2 Physical Tests - Bolts and Nuts]]. Original test results and calculations shall be recorded through SiteManager. | + | Samples of bolts and nuts shall be tested according to [[:Category:712 Structural Steel Construction#712.3.2.2 Physical Tests - Bolts and Nuts|EPG 712.3.2.2 Physical Tests - Bolts and Nuts]]. Original test results and calculations shall be recorded through SiteManager. |
==902.15.2 Sample Record== | ==902.15.2 Sample Record== | ||
| − | The sample record shall be completed in SiteManager, as described in [[106.10 Automation of Material Procedures|Automation Sec 3510]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab. | + | The sample record shall be completed in SiteManager, as described in [[106.10 Automation of Material Procedures|Automation Sec 3510]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab. |
[[Category:902 Signals]] | [[Category:902 Signals]] | ||
Revision as of 13:22, 30 March 2010
To establish procedures for Laboratory testing and reporting samples of bolts, nuts, and washers used in traffic signals. Refer to Sec 0902 for MoDOT's specifications.
Contents
902.15.1 Procedure
902.15.1.1 Chemical Tests
Mass of coating shall be determined according to AASHTO M232. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager.
902.15.1.2 Physical Tests
Samples of bolts and nuts shall be tested according to EPG 712.3.2.2 Physical Tests - Bolts and Nuts. Original test results and calculations shall be recorded through SiteManager.
902.15.2 Sample Record
The sample record shall be completed in SiteManager, as described in Automation Sec 3510, and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in EPG 106.9 Reporting Test Results, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.
