Difference between revisions of "Category:1102 Antifreeze and Summer Coolant"
m (→1102.2.2 Sample Record: minor clarification to differentiate EPG articles (that are referenced as "articles", not "sections") from specifications (that are referenced as "sections")) |
m (→1102.2.2 Sample Record: updated link) |
||
| Line 19: | Line 19: | ||
===1102.2.2 Sample Record=== | ===1102.2.2 Sample Record=== | ||
| − | The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510, Sampling and Testing], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106. | + | The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510, Sampling and Testing], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab. |
[[image:1102.jpg|center|775px]] | [[image:1102.jpg|center|775px]] | ||
Revision as of 13:12, 1 July 2010
| MGS Information |
| Current General Services Specifications (MGS) By Subject |
This article establishes procedures for sampling a universal low silicate anti-freeze and summer coolant. The requirements are set forth in the bid request issued by MoDOT.
Contents
1102.1 Procedure
Antifreeze and summer coolant shall be sampled by submitting to the Laboratory a one-gallon (4 liters) container, unopened, from each lot in the shipment. A sample tag shall be completed in accordance with Automation Section 3510, Sampling and Testing and shall accompany each sample submitted to the Laboratory. The sample tag shall include the brand name, supplier's name and address, manufacturer's name and address, lot number, quantity represented (in gallons), and purchase order number. A SiteManager record shall be made to include all of the pertinent information.
1102.2 Laboratory Testing Guidelines
This article establishes procedures for Laboratory testing and reporting samples of a universal low silicate antifreeze and summer coolant. The requirements are set forth in the bid request issued by MoDOT.
1102.2.1 Procedure
Antifreeze shall be tested in accordance with the methods set forth in the bid request. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager.
1102.2.2 Sample Record
The sample record shall be completed in SiteManager, as described in Automation Section 3510, Sampling and Testing, and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.
