Difference between revisions of "Category:1004 Graded Aggregate for Bituminous Surface"
| Line 1: | Line 1: | ||
| − | This guidance establishes procedures for the inspection and acceptance of graded | + | This guidance establishes procedures for the inspection, testing and acceptance of graded |
aggregate for bituminous surface. | aggregate for bituminous surface. | ||
| Line 26: | Line 26: | ||
==1004.3 Records and Reports== | ==1004.3 Records and Reports== | ||
All plant records shown in [[:Category:1001 General Requirements for Material#1001.2.5 Records and Reports|General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through SiteManager in accordance with [[Automation Section AS-3510]]. | All plant records shown in [[:Category:1001 General Requirements for Material#1001.2.5 Records and Reports|General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through SiteManager in accordance with [[Automation Section AS-3510]]. | ||
| + | |||
| + | ==1004.4 Laboratory Procedures for Sec 1004== | ||
| + | ===1004.4.1 Procedure=== | ||
| + | Inspection, testing, and sampling will be governed by the instructions contained in [[:Category:1001 General Requirements for Material|General Requirements for Material]]. | ||
| + | |||
| + | Field tests required are as follows: | ||
| + | |||
| + | {| border="1" class="wikitable" style="margin: 1em auto 1em auto" | ||
| + | |+ '''Required Field Tests''' | ||
| + | ! style="background:#BEBEBE"|TEST !! style="background:#BEBEBE"|Template !! style="background:#BEBEBE"|Template Description | ||
| + | |- | ||
| + | |Sieve Analysis || T27 || Sieve Analysis of Fine and Coarse Aggregate | ||
| + | |- | ||
| + | |Percent Deleterious || SAA001Cx<sup>*</sup> || NEWEST Deleterious 1004 Aggregate | ||
| + | |- | ||
| + | |colspan="3" style="background:#FFCC00" | <sup>*</sup>Test Template numbers have been depicted with a generic ‘x’ as some templates are updated and the last letter in the template name may change. The most current template for a template sequence should contain ‘NEWEST’ at the beginning of the template name. | ||
| + | |} | ||
| + | |||
| + | Samples required for Laboratory tests are as follows: | ||
| + | :(a) Source Approval | ||
| + | |||
| + | ===1004.4.2 Acceptance=== | ||
| + | Acceptance is based on routine tests in the field to ensure compliance with [http://modot.mo.gov/business/standards_and_specs/Sec1004.pdf|Sec 1004]. Samples are to be taken at destination or at the source of aggregate production by MoDOT inspectors at intervals of one per 1,500 tons. | ||
| + | |||
| + | ===1004.4.3 Records and Reports=== | ||
| + | All plant records shown in [[:Category:1001 General Requirements for Material#1001.2.5 Records and Reports|General Requirements for Material-Records and Reports]] shall be maintained. The aggregates shall be reported through SiteManager in accordance with [[Automation Section AS-3510]]. | ||
Revision as of 07:54, 20 July 2007
This guidance establishes procedures for the inspection, testing and acceptance of graded aggregate for bituminous surface.
Contents
1004.1 Procedure
Inspection, testing, and sampling will be governed by the instructions contained in General Requirements for Material.
Field tests required are as follows:
| TEST | Template | Template Description |
|---|---|---|
| Sieve Analysis | T27 | Sieve Analysis of Fine and Coarse Aggregate |
| Percent Deleterious | SAA001Cx* | NEWEST Deleterious 1004 Aggregate |
| *Test Template numbers have been depicted with a generic ‘x’ as some templates are updated and the last letter in the template name may change. The most current template for a template sequence should contain ‘NEWEST’ at the beginning of the template name. | ||
Samples required for Laboratory tests are as follows:
- (a) Source Approval.
1004.2 Acceptance
Acceptance is based on routine tests in the field to ensure compliance with Sec 1004. Samples are to be taken at destination or at the source of aggregate production by MoDOT inspectors at intervals of one per 1,500 tons.
1004.3 Records and Reports
All plant records shown in General Requirements for Material - Records and Reports shall be maintained. The aggregates shall be reported through SiteManager in accordance with Automation Section AS-3510.
1004.4 Laboratory Procedures for Sec 1004
1004.4.1 Procedure
Inspection, testing, and sampling will be governed by the instructions contained in General Requirements for Material.
Field tests required are as follows:
| TEST | Template | Template Description |
|---|---|---|
| Sieve Analysis | T27 | Sieve Analysis of Fine and Coarse Aggregate |
| Percent Deleterious | SAA001Cx* | NEWEST Deleterious 1004 Aggregate |
| *Test Template numbers have been depicted with a generic ‘x’ as some templates are updated and the last letter in the template name may change. The most current template for a template sequence should contain ‘NEWEST’ at the beginning of the template name. | ||
Samples required for Laboratory tests are as follows:
- (a) Source Approval
1004.4.2 Acceptance
Acceptance is based on routine tests in the field to ensure compliance with 1004. Samples are to be taken at destination or at the source of aggregate production by MoDOT inspectors at intervals of one per 1,500 tons.
1004.4.3 Records and Reports
All plant records shown in General Requirements for Material-Records and Reports shall be maintained. The aggregates shall be reported through SiteManager in accordance with Automation Section AS-3510.
