1020.6 Sampling Corrugated Metallic-Coated Steel Sheets

From Engineering Policy Guide
Revision as of 08:37, 5 September 2007 by Smithk (Talk | contribs) (moved to its own article)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Table 1020.6 Sampling Corrugated Metallic-Coated Steel Sheets

14 Gage (0.079 in. (2.01 mm)) and 16 Gage (0.064 in. (1.63mm))
Number of Sheets in Lot Number of Samples for Original Test Number of Additional Samples for Retest
0 to 499 1.00 2.00
500 to 999 2.00 3.00
1000 to 1499 3.00 5.00
1500 to 2000 4.00 6.00
8 Gage (0.168 in. (4.27 mm)), 10 Gage (0.138 in. (3.51 mm)) and 12 Gage (0.109 in. (2.77mm))
Number of Sheets in Lot Number of Samples for Original Test Number of Additional Samples for Retest
0 to 99 1.00 1.00
100 to 174 1.00 2.00
175 to 300 2.00 3.00