Difference between revisions of "821.23 Additives and Adjuvants"

From Engineering_Policy_Guide
Jump to navigation Jump to search
(Chaos non-ionic surfactant replaced with Red River, per Maintenance)
m (Per MT, new products with the new 2017 bid have replaced old products)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
{|border="4" align="right"
 
|-style="background:yellow"
 
|[http://wwwi/maintenance/roadsides.htm '''MoDOT's Herbicide Database''']
 
|}
 
 
 
 
'''Definition:'''  Products designed to increase the effectiveness of herbicides.
 
'''Definition:'''  Products designed to increase the effectiveness of herbicides.
  
Line 28: Line 22:
 
|'''Additional Information'''
 
|'''Additional Information'''
 
|-
 
|-
|[http://wwwi/ri/msds_results.asp MSDS Online]
+
|[http://hq.msdsonline.com/mdot3741/Search/Default.aspx MSDS Online]
 +
|-
 +
|[[media:821.23.docx|MSDS Online User Guide]]
 
|}
 
|}
  
'''Current Products"
+
'''Always check labels before using additives or adjuvants.'''  Adjuvants are highly active materials.  In most cases, a very small quantity, often 0.25% or 1 quart per 100 gallons, is all that is needed.  Higher quality adjuvants may be considerably less such as 8 ounces per 100 gallons. 
 +
 
 +
Read the label.  Be careful to use only the amount needed. 
  
:'''Drift Control'''
+
Use only approved additives. Each year these may change so read the label attached to the product and follow the recommendations as listed.
  
::Partition by UAP
+
===Current Products===
:::[[media: 821.23 Partition label.pdf|Partition Label]]
+
:::[[media: 821.23 Partition MSDS.pdf|Partition MSDS]]
+
'''Non-Ionic Surfactant'''
:::Commodity Code, 6759050541
 
:::Recommended Rate, 4 to 8 oz. per 100 gallons of water
 
  
:'''Non-Ionic Surfactant'''
+
These are used to reduce the droplet tension on the surface of leaves, particularly waxy leaf surfaces. It helps the product get into the plant.
::Red River DOT non-ionic
+
:::[[media:821.23 Red River Label.pdf|Red River Label]]
+
::Induce by Helena, Commodity Code: HERB50831
:::[[media:821.23 Red River MSDS.pdf|Red River MSDS]]
+
::NIS by Red River
:::Commodity Code, 6759050831
 
:::Recommended Rate, 8 to 6 oz. per 100 gallons of water
 
  
:'''Water Treatment'''
+
::Recommended Rate: Read the Label
::WATER-SOFT by UAP
 
:::[[media:821.23 Watersoft label.pdf|Watersoft Label]]
 
:::[[media:821.23 Watersoft MSDS.pdf|Watersoft MSDS]]
 
:::Commodity Code, 6759050833
 
:::Recommended Rate, 1 qt. per 100 gallons of water
 
  
'''Always check labels before using additives or adjuvants.''' Adjuvants are highly active materials.  In most cases, a very small quantity, often 0.25% or 1 quart per 100 gallons, is all that is needed.  Higher quality adjuvants may be considerably less such as 8 ounces per 100 gallons. 
+
'''Water Conditioner'''
 +
 
 +
Used to help balance the water, help and keep dry flowable products in solution.  
 +
 +
::Quest by Helena, Commodity Code: HERB50833
 +
::Elite Impreial by Red River
  
Read the label.  Be careful to use only the amount needed. 
+
::Recommended Rate: Read the label
  
Use only approved additives.
 
  
 
[[category:821 Herbicides and Roadsides]]
 
[[category:821 Herbicides and Roadsides]]

Latest revision as of 13:23, 23 February 2017

Definition: Products designed to increase the effectiveness of herbicides.

Why: Herbicides are formulated for general performance purposes under average conditions. For most jobs they perform satisfactorily but there are many situations where they fall short of the desired effect. For example, the effectiveness of Krenite, used for brush control, is reduced in hard water and the effectiveness of Outrider, used for Johnson grass control, is reduced in water with low pH. If the target species has a very waxy covering on the leaves, such as kudzu, the effectiveness of increasing the wetting ability on the leaf surface enhances the herbicide selected. If drift is a concern, the viscosity or droplet size can be changed so that few fine droplets will be formed and drift will be reduced. Spray additives or adjuvants can be added to solve each of these problems. A substance added to the spray mixture to aid or improve the performance of the main ingredient is an additive.

Method: There are seven principal additives or adjuvants to be considered.

1. Surfactant - Makes the herbicide more effective by breaking down the waxy layer on the leaf surface.

2. Dormant Oils - Helps the herbicide stick to the plant and enter the plant

3. Sodium Gluconate and Water-soft – Softens hard water soft increasing the effectiveness of herbicides

4. Drift Control Agents – Minimizes drift by increasing droplet size

5. Defoamers - Reduces the foam created during agitation with some herbicides

6. Suspension Agents - Helps herbicides remain suspended in solution for longer periods of time

7. Dyes – Highlights treated areas

Additional Information
MSDS Online
MSDS Online User Guide

Always check labels before using additives or adjuvants. Adjuvants are highly active materials. In most cases, a very small quantity, often 0.25% or 1 quart per 100 gallons, is all that is needed. Higher quality adjuvants may be considerably less such as 8 ounces per 100 gallons.

Read the label. Be careful to use only the amount needed.

Use only approved additives. Each year these may change so read the label attached to the product and follow the recommendations as listed.

Current Products

Non-Ionic Surfactant

These are used to reduce the droplet tension on the surface of leaves, particularly waxy leaf surfaces. It helps the product get into the plant.

Induce by Helena, Commodity Code: HERB50831
NIS by Red River
Recommended Rate: Read the Label

Water Conditioner

Used to help balance the water, help and keep dry flowable products in solution.

Quest by Helena, Commodity Code: HERB50833
Elite Impreial by Red River
Recommended Rate: Read the label