https://epg.modot.org/index.php?title=Category:1043_Fence_Material&feed=atom&action=historyCategory:1043 Fence Material - Revision history2024-03-28T16:30:36ZRevision history for this page on the wikiMediaWiki 1.33.1https://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=50244&oldid=prevSmithk: /* 1043.4 Report */ Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info2021-10-01T18:45:58Z<p><span dir="auto"><span class="autocomment">1043.4 Report: </span> Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info</span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 18:45, 1 October 2021</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l152" >Line 152:</td>
<td colspan="2" class="diff-lineno">Line 152:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==1043.4 Report==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==1043.4 Report==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline">SiteManager </del>is to be used for submitting samples to the Laboratory and as an acceptance report. If aluminum coated steel, vinyl coated steel, aluminum alloy materials, or zinc plus organic coated steel materials are inspected or sampled, the report must be altered as required to reflect the proper material and tests desired or performed. Reports for zinc plus organic coated steel members shall also include the brand name. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results|Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection. If a sample is submitted to the Laboratory for testing use <del class="diffchange diffchange-inline">SiteManager</del>. The Laboratory will perform the designated tests and complete the report distribution of reports for materials purchased under a MoDOT purchase order is to be as described in [[:Category:1101 Materials Purchased by a Department Purchase Order|EPG 1101 Materials Purchased by a Department Purchase Orderals]].</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">AASHTOWARE Project (AWP) </ins>is to be used for submitting samples to the Laboratory and as an acceptance report. If aluminum coated steel, vinyl coated steel, aluminum alloy materials, or zinc plus organic coated steel materials are inspected or sampled, the report must be altered as required to reflect the proper material and tests desired or performed. Reports for zinc plus organic coated steel members shall also include the brand name. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results|Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection. If a sample is submitted to the Laboratory for testing use <ins class="diffchange diffchange-inline">AWP</ins>. The Laboratory will perform the designated tests and complete the report distribution of reports for materials purchased under a MoDOT purchase order is to be as described in [[:Category:1101 Materials Purchased by a Department Purchase Order|EPG 1101 Materials Purchased by a Department Purchase Orderals]].</div></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=43917&oldid=prevSmithk at 20:23, 10 October 20182018-10-10T20:23:50Z<p></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 20:23, 10 October 2018</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2" >Line 2:</td>
<td colspan="2" class="diff-lineno">Line 2:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>{|style="padding: 0.3em; margin-left:<del class="diffchange diffchange-inline">1px</del>; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right" </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>{|style="padding: 0.3em; margin-left:<ins class="diffchange diffchange-inline">7px</ins>; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right" </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|'''MGS Information'''</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|'''MGS Information'''</div></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=43916&oldid=prevSmithk at 20:21, 10 October 20182018-10-10T20:21:04Z<p></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 20:21, 10 October 2018</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l6" >Line 6:</td>
<td colspan="2" class="diff-lineno">Line 6:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|'''MGS Information'''</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|'''MGS Information'''</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>|[<del class="diffchange diffchange-inline">http</del>://www.modot.<del class="diffchange diffchange-inline">mo.gov/business/materials/pdf</del>/mgs<del class="diffchange diffchange-inline">/MGSINDEX.pdf </del>Current General Services Specifications (MGS) By Subject] </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|[<ins class="diffchange diffchange-inline">https</ins>://www.modot.<ins class="diffchange diffchange-inline">org</ins>/<ins class="diffchange diffchange-inline">general-services-specifications-</ins>mgs<ins class="diffchange diffchange-inline">-subject </ins>Current General Services Specifications (MGS) By Subject] </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=43817&oldid=prevSmithk: /* 1043.2.2 Metal Posts, Brace Rails and Gate Frames */2018-09-28T17:21:16Z<p><span dir="auto"><span class="autocomment">1043.2.2 Metal Posts, Brace Rails and Gate Frames</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 17:21, 28 September 2018</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l114" >Line 114:</td>
<td colspan="2" class="diff-lineno">Line 114:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Containers or bundles of posts, brace rails, or gate frames are to be identified as to manufacturer or supplier, kind of metal and other information necessary for proper identification of the lot or shipment.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Containers or bundles of posts, brace rails, or gate frames are to be identified as to manufacturer or supplier, kind of metal and other information necessary for proper identification of the lot or shipment.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The outside diameter and wall thickness of standard weight (Mass) steel pipe posts, rails, and gate frames are to be tested for conformance to ASTM F1083. Lightweight steel pipe rail are to be tested for outside diameter to determine conformance to [<del class="diffchange diffchange-inline">http</del>://www.modot.<del class="diffchange diffchange-inline">mo.gov/business/standards_and_specs</del>/<del class="diffchange diffchange-inline">documents</del>/<del class="diffchange diffchange-inline">60710.pdf </del>Standard Plan 607.10]. Tolerances for thickness and size of the square-formed posts and rails are also shown on Standard Plan 607.10. Steel H-section posts do not have specified dimension tolerances and are acceptable as long as they were manufactured to the standard size shown on Standard Plan 607.10. Zinc plus organic coated members are to be tested for wall thickness to determine conformance to Standard Plan 607.10. The nominal size of aluminum alloy pipe is shown on Standard Plan 607.10; diameter and wall thickness are to be checked for conformance to ANSI H35.2. The inspector should determine what schedule number of aluminum alloy pipe is being furnished, then consult the tolerance tables, ANSI H35.2, to determine requirements. Fabrication of all items should show good workmanship and that the material is suitable for the intended use.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The outside diameter and wall thickness of standard weight (Mass) steel pipe posts, rails, and gate frames are to be tested for conformance to ASTM F1083. Lightweight steel pipe rail are to be tested for outside diameter to determine conformance to [<ins class="diffchange diffchange-inline">https</ins>://www.modot.<ins class="diffchange diffchange-inline">org</ins>/<ins class="diffchange diffchange-inline">media</ins>/<ins class="diffchange diffchange-inline">16870 </ins>Standard Plan 607.10]. Tolerances for thickness and size of the square-formed posts and rails are also shown on Standard Plan 607.10. Steel H-section posts do not have specified dimension tolerances and are acceptable as long as they were manufactured to the standard size shown on Standard Plan 607.10. Zinc plus organic coated members are to be tested for wall thickness to determine conformance to Standard Plan 607.10. The nominal size of aluminum alloy pipe is shown on Standard Plan 607.10; diameter and wall thickness are to be checked for conformance to ANSI H35.2. The inspector should determine what schedule number of aluminum alloy pipe is being furnished, then consult the tolerance tables, ANSI H35.2, to determine requirements. Fabrication of all items should show good workmanship and that the material is suitable for the intended use.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Weight (mass) per linear ft. (meter) is to be tested on all steel pipe posts, rails, materials for gate frames and H-section posts. Weight (Mass) per linear foot [meter] may or may not be required on aluminum alloy pipe, depending on the schedule number of pipe furnished. It will be necessary to consult ANSI H35.2 when inspecting aluminum alloy pipe. When determining weight (mass) per linear ft. (meter), as many lengths of the item should be weighed at one time as can be accurately weighed on the scales being used. The following allowable weight (mass) tolerances are to be used:</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Weight (mass) per linear ft. (meter) is to be tested on all steel pipe posts, rails, materials for gate frames and H-section posts. Weight (Mass) per linear foot [meter] may or may not be required on aluminum alloy pipe, depending on the schedule number of pipe furnished. It will be necessary to consult ANSI H35.2 when inspecting aluminum alloy pipe. When determining weight (mass) per linear ft. (meter), as many lengths of the item should be weighed at one time as can be accurately weighed on the scales being used. The following allowable weight (mass) tolerances are to be used:</div></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=37794&oldid=prevSmithk: updated links2016-06-15T17:34:06Z<p>updated links</p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 17:34, 15 June 2016</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l9" >Line 9:</td>
<td colspan="2" class="diff-lineno">Line 9:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>This article establishes inspection and [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] procedures for fencing materials except wood posts, which are inspected in accordance with [[:category: 1050 Lumber, Timber, Piling, Posts and Poles|EPG 1050 Lumber, Timber, Piling, Posts and Poles]]. Refer to [http://www.modot.<del class="diffchange diffchange-inline">mo.gov</del>/business/standards_and_specs/<del class="diffchange diffchange-inline">Sec1043</del>.pdf Sec 1043] for MoDOT’s specifications. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This article establishes inspection and [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] procedures for fencing materials except wood posts, which are inspected in accordance with [[:category: 1050 Lumber, Timber, Piling, Posts and Poles|EPG 1050 Lumber, Timber, Piling, Posts and Poles]]. Refer to [http://www.modot.<ins class="diffchange diffchange-inline">org</ins>/business/standards_and_specs/<ins class="diffchange diffchange-inline">SpecbookEPG</ins>.pdf<ins class="diffchange diffchange-inline">#page=14 </ins>Sec 1043] for MoDOT’s specifications. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>For Laboratory testing and sample reporting procedures, refer to [[1043.5 Laboratory Testing Guidelines for Sec 1043|EPG 1043.5 Laboratory Testing Guidelines for Sec 1043]]. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>For Laboratory testing and sample reporting procedures, refer to [[1043.5 Laboratory Testing Guidelines for Sec 1043|EPG 1043.5 Laboratory Testing Guidelines for Sec 1043]]. </div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l44" >Line 44:</td>
<td colspan="2" class="diff-lineno">Line 44:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>All dimensions should be measured for compliance with the specifications or Standard Drawings. This would include height of fabric, mesh size, wire spacing, spacing of barbs, etc. Fabrication should be checked for workmanship and to determine that the material is that specified for use.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>All dimensions should be measured for compliance with the specifications or Standard Drawings. This would include height of fabric, mesh size, wire spacing, spacing of barbs, etc. Fabrication should be checked for workmanship and to determine that the material is that specified for use.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The contractor or supplier is to maintain on file a manufacturer's certification when supplying aluminum alloy chain link fabric. The certification is to include typical test results of physical properties representative of the material furnished and certify the material conforms to the requirements of [http://www.modot.<del class="diffchange diffchange-inline">mo.gov</del>/business/standards_and_specs/<del class="diffchange diffchange-inline">Sec1043</del>.pdf Sec 1043] and its supplements.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The contractor or supplier is to maintain on file a manufacturer's certification when supplying aluminum alloy chain link fabric. The certification is to include typical test results of physical properties representative of the material furnished and certify the material conforms to the requirements of [http://www.modot.<ins class="diffchange diffchange-inline">org</ins>/business/standards_and_specs/<ins class="diffchange diffchange-inline">SpecbookEPG</ins>.pdf<ins class="diffchange diffchange-inline">#page=14 </ins>Sec 1043] and its supplements.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The contractor or supplier is to maintain on file a manufacturer's certification when supplying vinyl coated steel fabric. The certification is to certify that the material conforms to the requirements of Sec 1043 and its supplements.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The contractor or supplier is to maintain on file a manufacturer's certification when supplying vinyl coated steel fabric. The certification is to certify that the material conforms to the requirements of Sec 1043 and its supplements.</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l130" >Line 130:</td>
<td colspan="2" class="diff-lineno">Line 130:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Field determination of weight (mass) of coating, by magnetic gauge, is to be made on each lot of material furnished. The magnetic gauge is to be operated and calibrated in accordance with ASTM E376. Specimens for field testing are to be selected from each lot at the frequency shown in Table 1043, but in no case, shall less than three specimens be tested. A single-spot test is to be comprised of five readings of the magnetic gauge taken in a small area and those five readings averaged to obtain a single test result. At least three such areas should be tested on each of the specimens being tested, one area near each end and one near the center. This would yield at least three test results for that specimen. Average the three test results to obtain the average coating weight (mass) for that specimen. Average all test results from all specimens to obtain the average coating weight (mass) to be reported. Also report the minimum coating weight (mass) that would be the lowest average coating weight (mass) found on any one specimen. Material may be accepted or rejected for galvanized coating on the basis of magnetic gauge results. If a test result fails to comply with the specifications, that lot should be re-sampled at double the original rate. If any of the re-samples fail to comply with the specifications, that lot is to be rejected. The contractor or supplier is to be given the option of sampling for Laboratory testing, if magnetic gauge test results are within minus 15 percent of the specified coating weight (mass).</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Field determination of weight (mass) of coating, by magnetic gauge, is to be made on each lot of material furnished. The magnetic gauge is to be operated and calibrated in accordance with ASTM E376. Specimens for field testing are to be selected from each lot at the frequency shown in Table 1043, but in no case, shall less than three specimens be tested. A single-spot test is to be comprised of five readings of the magnetic gauge taken in a small area and those five readings averaged to obtain a single test result. At least three such areas should be tested on each of the specimens being tested, one area near each end and one near the center. This would yield at least three test results for that specimen. Average the three test results to obtain the average coating weight (mass) for that specimen. Average all test results from all specimens to obtain the average coating weight (mass) to be reported. Also report the minimum coating weight (mass) that would be the lowest average coating weight (mass) found on any one specimen. Material may be accepted or rejected for galvanized coating on the basis of magnetic gauge results. If a test result fails to comply with the specifications, that lot should be re-sampled at double the original rate. If any of the re-samples fail to comply with the specifications, that lot is to be rejected. The contractor or supplier is to be given the option of sampling for Laboratory testing, if magnetic gauge test results are within minus 15 percent of the specified coating weight (mass).</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Certifications for aluminum alloy posts, rails, gate frames, or expansion sleeves are not required by the specifications. However, a certification is desirable in order that full sampling and testing will not be necessary. A manufacturer's certification should show typical physical properties representative of the material and certify that it conforms to the requirements of [http://www.modot.<del class="diffchange diffchange-inline">mo.gov</del>/business/standards_and_specs/<del class="diffchange diffchange-inline">Sec1043</del>.pdf Sec 1043] and its supplements.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Certifications for aluminum alloy posts, rails, gate frames, or expansion sleeves are not required by the specifications. However, a certification is desirable in order that full sampling and testing will not be necessary. A manufacturer's certification should show typical physical properties representative of the material and certify that it conforms to the requirements of [http://www.modot.<ins class="diffchange diffchange-inline">org</ins>/business/standards_and_specs/<ins class="diffchange diffchange-inline">SpecbookEPG</ins>.pdf<ins class="diffchange diffchange-inline">#page=14 </ins>Sec 1043] and its supplements.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.3 Miscellaneous Fittings and Hardware===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.3 Miscellaneous Fittings and Hardware===</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l144" >Line 144:</td>
<td colspan="2" class="diff-lineno">Line 144:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Weight (mass) of coating is to be determined by magnetic gauge on each lot of fittings and hardware. Test procedures and conditions of acceptance or rejection shall be as explained in [[:category:1043 Fence Material#Field determination of weight (mass) of coating|Field determination of weight (mass) of coating]] except the number of single spot tests may vary due to the size of item.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Weight (mass) of coating is to be determined by magnetic gauge on each lot of fittings and hardware. Test procedures and conditions of acceptance or rejection shall be as explained in [[:category:1043 Fence Material#Field determination of weight (mass) of coating|Field determination of weight (mass) of coating]] except the number of single spot tests may vary due to the size of item.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Aluminum alloy fittings and hardware require a certification to be furnished, in triplicate, by the contractor or supplier. The certification is to show typical test results of physical properties and certify that the material furnished conforms to [http://www.modot.<del class="diffchange diffchange-inline">mo.gov</del>/business/standards_and_specs/<del class="diffchange diffchange-inline">Sec1043</del>.pdf Sec 1043] and its supplements.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Aluminum alloy fittings and hardware require a certification to be furnished, in triplicate, by the contractor or supplier. The certification is to show typical test results of physical properties and certify that the material furnished conforms to [http://www.modot.<ins class="diffchange diffchange-inline">org</ins>/business/standards_and_specs/<ins class="diffchange diffchange-inline">SpecbookEPG</ins>.pdf<ins class="diffchange diffchange-inline">#page=14 </ins>Sec 1043] and its supplements.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.4 Gates===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.4 Gates===</div></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=37484&oldid=prevSmithk: /* 1043.2 Procedure */ Per CM, fence material acceptance will be based on EPG 1040.22016-06-01T15:51:29Z<p><span dir="auto"><span class="autocomment">1043.2 Procedure: </span> Per CM, fence material acceptance will be based on EPG 1040.2</span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 15:51, 1 June 2016</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l22" >Line 22:</td>
<td colspan="2" class="diff-lineno">Line 22:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==1043.2 Procedure==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==1043.2 Procedure==</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Fence material acceptance will be based on the procedures detailed in [[:Category:1040 Guardrail, End Terminals, One-Strand Access Restraint Cable and Three-Strand Guard Cable Material#1040.2 Procedure|EPG 1040.2 Procedure]].</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.1 Chain Link Fabric, Woven Wire Fabric, Brace Wire, Tension Wire, Barbed Wire and Fabric Fasteners===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.1 Chain Link Fabric, Woven Wire Fabric, Brace Wire, Tension Wire, Barbed Wire and Fabric Fasteners===</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l42" >Line 42:</td>
<td colspan="2" class="diff-lineno">Line 44:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>All dimensions should be measured for compliance with the specifications or Standard Drawings. This would include height of fabric, mesh size, wire spacing, spacing of barbs, etc. Fabrication should be checked for workmanship and to determine that the material is that specified for use.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>All dimensions should be measured for compliance with the specifications or Standard Drawings. This would include height of fabric, mesh size, wire spacing, spacing of barbs, etc. Fabrication should be checked for workmanship and to determine that the material is that specified for use.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The contractor or supplier is to <del class="diffchange diffchange-inline">furnish </del>a manufacturer's certification when supplying aluminum alloy chain link fabric. The certification is to include typical test results of physical properties representative of the material furnished and certify the material conforms to the requirements of [http://www.modot.mo.gov/business/standards_and_specs/Sec1043.pdf Sec 1043] and its supplements.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The contractor or supplier is to <ins class="diffchange diffchange-inline">maintain on file </ins>a manufacturer's certification when supplying aluminum alloy chain link fabric. The certification is to include typical test results of physical properties representative of the material furnished and certify the material conforms to the requirements of [http://www.modot.mo.gov/business/standards_and_specs/Sec1043.pdf Sec 1043] and its supplements.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The contractor or supplier is to <del class="diffchange diffchange-inline">furnish </del>a manufacturer's certification when supplying vinyl coated steel fabric. The certification is to certify that the material conforms to the requirements of Sec 1043 and its supplements.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The contractor or supplier is to <ins class="diffchange diffchange-inline">maintain on file </ins>a manufacturer's certification when supplying vinyl coated steel fabric. The certification is to certify that the material conforms to the requirements of Sec 1043 and its supplements.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====<center>''Table 1043''</center>====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====<center>''Table 1043''</center>====</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l104" >Line 104:</td>
<td colspan="2" class="diff-lineno">Line 106:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.2 Metal Posts, Brace Rails and Gate Frames===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.2 Metal Posts, Brace Rails and Gate Frames===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc-coated steel and aluminum-coated steel members only need to be submitted to the Laboratory when field inspection indicates questionable compliance or when requested by the State Construction and Materials Engineer. Samples of aluminum alloy members only need to be taken when field inspection indicates questionable compliance, when a manufacturer's certification is not <del class="diffchange diffchange-inline">furnished with the material, or when requested</del>. When samples are taken, they shall be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of material is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same kind of metal, coating, size, and manufacturer, offered for inspection at one time.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc-coated steel and aluminum-coated steel members only need to be submitted to the Laboratory when field inspection indicates questionable compliance or when requested by the State Construction and Materials Engineer. Samples of aluminum alloy members only need to be taken when field inspection indicates questionable compliance, when a manufacturer's certification is not <ins class="diffchange diffchange-inline">available upon request</ins>. When samples are taken, they shall be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of material is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same kind of metal, coating, size, and manufacturer, offered for inspection at one time.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc plus organic coated steel members shall be submitted to the laboratory for determination of weight (Mass) and thickness of coating. The samples shall be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of materials is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same coating, size, and manufacturer offered for inspection at one time.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc plus organic coated steel members shall be submitted to the laboratory for determination of weight (Mass) and thickness of coating. The samples shall be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of materials is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same coating, size, and manufacturer offered for inspection at one time.</div></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=23501&oldid=prevSmithk: updated link2010-07-01T16:13:34Z<p>updated link</p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 16:13, 1 July 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l9" >Line 9:</td>
<td colspan="2" class="diff-lineno">Line 9:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>This article establishes inspection and [[106.<del class="diffchange diffchange-inline">5 </del>Sampling|sampling]] procedures for fencing materials except wood posts, which are inspected in accordance with [[:category: 1050 Lumber, Timber, Piling, Posts and Poles|EPG 1050 Lumber, Timber, Piling, Posts and Poles]]. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1043.pdf Sec 1043] for MoDOT’s specifications. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This article establishes inspection and [[106.<ins class="diffchange diffchange-inline">3 Samples, Tests and Cited Specifications#106.3.1 </ins>Sampling|sampling]] procedures for fencing materials except wood posts, which are inspected in accordance with [[:category: 1050 Lumber, Timber, Piling, Posts and Poles|EPG 1050 Lumber, Timber, Piling, Posts and Poles]]. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1043.pdf Sec 1043] for MoDOT’s specifications. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>For Laboratory testing and sample reporting procedures, refer to [[1043.5 Laboratory Testing Guidelines for Sec 1043|EPG 1043.5 Laboratory Testing Guidelines for Sec 1043]]. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>For Laboratory testing and sample reporting procedures, refer to [[1043.5 Laboratory Testing Guidelines for Sec 1043|EPG 1043.5 Laboratory Testing Guidelines for Sec 1043]]. </div></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=22454&oldid=prevSmithk: minor clarifications2010-03-31T12:54:45Z<p>minor clarifications</p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 12:54, 31 March 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l9" >Line 9:</td>
<td colspan="2" class="diff-lineno">Line 9:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>This article establishes inspection and [[106.5 Sampling|sampling]] procedures for fencing materials except wood posts, which are inspected in accordance with [[:category: 1050 Lumber, Timber, Piling, Posts and Poles|1050 Lumber, Timber, Piling, Posts and Poles]]. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1043.pdf Sec 1043] for MoDOT’s specifications. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This article establishes inspection and [[106.5 Sampling|sampling]] procedures for fencing materials except wood posts, which are inspected in accordance with [[:category: 1050 Lumber, Timber, Piling, Posts and Poles|<ins class="diffchange diffchange-inline">EPG </ins>1050 Lumber, Timber, Piling, Posts and Poles]]. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1043.pdf Sec 1043] for MoDOT’s specifications. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>For Laboratory testing and sample reporting procedures, refer to [[1043.5 Laboratory Testing Guidelines for Sec 1043|1043.5 Laboratory Testing Guidelines for Sec 1043]]. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>For Laboratory testing and sample reporting procedures, refer to [[1043.5 Laboratory Testing Guidelines for Sec 1043|<ins class="diffchange diffchange-inline">EPG </ins>1043.5 Laboratory Testing Guidelines for Sec 1043]]. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==1043.1 Apparatus==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==1043.1 Apparatus==</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l150" >Line 150:</td>
<td colspan="2" class="diff-lineno">Line 150:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==1043.4 Report==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==1043.4 Report==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>SiteManager is to be used for submitting samples to the Laboratory and as an acceptance report. If aluminum coated steel, vinyl coated steel, aluminum alloy materials, or zinc plus organic coated steel materials are inspected or sampled, the report must be altered as required to reflect the proper material and tests desired or performed. Reports for zinc plus organic coated steel members shall also include the brand name. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results|Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection. If a sample is submitted to the Laboratory for testing use SiteManager. The Laboratory will perform the designated tests and complete the report distribution of reports for materials purchased under a MoDOT purchase order is to be as described in [[:Category:1101 Materials Purchased by a Department Purchase Order|1101 Materials Purchased by a Department Purchase Orderals]].</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>SiteManager is to be used for submitting samples to the Laboratory and as an acceptance report. If aluminum coated steel, vinyl coated steel, aluminum alloy materials, or zinc plus organic coated steel materials are inspected or sampled, the report must be altered as required to reflect the proper material and tests desired or performed. Reports for zinc plus organic coated steel members shall also include the brand name. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[:category: 106 Control of Material#Reporting Test Results|Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection. If a sample is submitted to the Laboratory for testing use SiteManager. The Laboratory will perform the designated tests and complete the report distribution of reports for materials purchased under a MoDOT purchase order is to be as described in [[:Category:1101 Materials Purchased by a Department Purchase Order|<ins class="diffchange diffchange-inline">EPG </ins>1101 Materials Purchased by a Department Purchase Orderals]].</div></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=21773&oldid=prevSmithk: /* 1043.2 Procedure */per CM, updated a title2009-12-28T19:45:27Z<p><span dir="auto"><span class="autocomment">1043.2 Procedure: </span>per CM, updated a title</span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 19:45, 28 December 2009</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l104" >Line 104:</td>
<td colspan="2" class="diff-lineno">Line 104:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.2 Metal Posts, Brace Rails and Gate Frames===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.2 Metal Posts, Brace Rails and Gate Frames===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc-coated steel and aluminum-coated steel members only need to be submitted to the Laboratory when field inspection indicates questionable compliance or when requested by the <del class="diffchange diffchange-inline">Division </del>Engineer<del class="diffchange diffchange-inline">, Materials</del>. Samples of aluminum alloy members only need to be taken when field inspection indicates questionable compliance, when a manufacturer's certification is not furnished with the material, or when requested. When samples are taken, they shall be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of material is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same kind of metal, coating, size, and manufacturer, offered for inspection at one time.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc-coated steel and aluminum-coated steel members only need to be submitted to the Laboratory when field inspection indicates questionable compliance or when requested by the <ins class="diffchange diffchange-inline">State Construction and Materials </ins>Engineer. Samples of aluminum alloy members only need to be taken when field inspection indicates questionable compliance, when a manufacturer's certification is not furnished with the material, or when requested. When samples are taken, they shall be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of material is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same kind of metal, coating, size, and manufacturer, offered for inspection at one time.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc plus organic coated steel members shall be submitted to the laboratory for determination of weight (Mass) and thickness of coating. The samples shall be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of materials is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same coating, size, and manufacturer offered for inspection at one time.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc plus organic coated steel members shall be submitted to the laboratory for determination of weight (Mass) and thickness of coating. The samples shall be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of materials is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same coating, size, and manufacturer offered for inspection at one time.</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l132" >Line 132:</td>
<td colspan="2" class="diff-lineno">Line 132:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.3 Miscellaneous Fittings and Hardware===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===1043.2.3 Miscellaneous Fittings and Hardware===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc coated steel fittings and hardware only need to be submitted to the Laboratory when field inspection indicates questionable compliance, when the item is of a size or shape that cannot be tested for coating weight (mass) with a magnetic gauge, or when requested by the <del class="diffchange diffchange-inline">Division </del>Engineer<del class="diffchange diffchange-inline">, Materials</del>. A certification and field inspection are required for the acceptance of aluminum alloy fittings and hardware. Samples are not required to be submitted to the Laboratory but may be submitted anytime the inspector needs verification of inspection results. When samples are taken, they are to be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of material is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same kind of metal, coating, type, size and manufacturer offered for inspection at one time.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Samples of zinc coated steel fittings and hardware only need to be submitted to the Laboratory when field inspection indicates questionable compliance, when the item is of a size or shape that cannot be tested for coating weight (mass) with a magnetic gauge, or when requested by the <ins class="diffchange diffchange-inline">State Construction and Materials </ins>Engineer. A certification and field inspection are required for the acceptance of aluminum alloy fittings and hardware. Samples are not required to be submitted to the Laboratory but may be submitted anytime the inspector needs verification of inspection results. When samples are taken, they are to be taken at the frequency and of the size shown in Table 1043. In the event a sample fails to comply with specification requirements, that lot of material is to be re-sampled at double the original sampling rate. If any of the re-samples fail, that lot shall be rejected. A lot of these materials shall be that quantity of material of the same kind of metal, coating, type, size and manufacturer offered for inspection at one time.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Field inspection of miscellaneous fittings and hardware is to consist of checking identification markings, fabrication, weight (mass) of coating on zinc coated steel items, and examination of the certification required for aluminum alloy items.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Field inspection of miscellaneous fittings and hardware is to consist of checking identification markings, fabrication, weight (mass) of coating on zinc coated steel items, and examination of the certification required for aluminum alloy items.</div></td></tr>
</table>Smithkhttps://epg.modot.org/index.php?title=Category:1043_Fence_Material&diff=17244&oldid=prevSmithk: article construction2008-03-04T16:40:51Z<p>article construction</p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 16:40, 4 March 2008</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l9" >Line 9:</td>
<td colspan="2" class="diff-lineno">Line 9:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>This article establishes inspection and sampling procedures for fencing materials except wood posts, which are inspected in accordance with [[:category: 1050 Lumber, Timber, Piling, Posts and Poles|1050 Lumber, Timber, Piling, Posts and Poles]]. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1043.pdf Sec 1043] for MoDOT’s specifications. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This article establishes inspection and <ins class="diffchange diffchange-inline">[[106.5 Sampling|</ins>sampling<ins class="diffchange diffchange-inline">]] </ins>procedures for fencing materials except wood posts, which are inspected in accordance with [[:category: 1050 Lumber, Timber, Piling, Posts and Poles|1050 Lumber, Timber, Piling, Posts and Poles]]. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec1043.pdf Sec 1043] for MoDOT’s specifications. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>For Laboratory testing and sample reporting procedures, refer to [[1043.5 Laboratory Testing Guidelines for Sec 1043|1043.5 Laboratory Testing Guidelines for Sec 1043]]. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>For Laboratory testing and sample reporting procedures, refer to [[1043.5 Laboratory Testing Guidelines for Sec 1043|1043.5 Laboratory Testing Guidelines for Sec 1043]]. </div></td></tr>
</table>Smithk