Difference between revisions of "Category:1056 Concrete Tinting Material"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (→‎Apparatus: article construction)
m (updated article with 6/6/07 materials info)
Line 1: Line 1:
 
This article establishes procedures for sampling red tinting material for use in [[:Category:502 Portland Cement Concrete Base and Pavement|Portland cement concrete]].  It provides the material inspection guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec1056.pdf Sec 1056].  
 
This article establishes procedures for sampling red tinting material for use in [[:Category:502 Portland Cement Concrete Base and Pavement|Portland cement concrete]].  It provides the material inspection guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec1056.pdf Sec 1056].  
  
−
==Apparatus==
+
For Laboratory testing and sample reporting procedures, refer to [[1056.1 Laboratory Testing Guidelines for Sec 1056|1056.1 Laboratory Testing Guidelines for Sec 1056]].
  
−
:(a) Appropriate sampling thief.
+
'''Procedure.''' Acceptance of tinting materials shall be based on verification of manufacturer’s certification that the tinting material complies with ASTM C979. A copy of the manufacturer’s certification shall be provided to the inspector by the supplier for acceptance purposes.
−
 
 
−
:(b) One-half in. (12 mm) sample splitter.
 
−
 
 
−
==Procedure==
 
−
 
 
−
Care shall be exercised in obtaining the sample because the material is subject to segregation. At least three bags should be selected and a sample obtained from each bag by use of an appropriate sampling thief. The sample shall be reduced to approximately one quart (1 liter) by use of a one in. (25 mm) sample splitter, taking care to eliminate loss of tinting compound during the splitting procedure. The sample shall be submitted to the Laboratory in a one quart (1 liter) friction top can accompanied by a properly completed Form T-617 showing the manufacturer's name, the brand name and designation of the material, lot number and net quantity represented.
 

Revision as of 14:05, 7 September 2007

This article establishes procedures for sampling red tinting material for use in Portland cement concrete. It provides the material inspection guidelines for Sec 1056.

For Laboratory testing and sample reporting procedures, refer to 1056.1 Laboratory Testing Guidelines for Sec 1056.

Procedure. Acceptance of tinting materials shall be based on verification of manufacturer’s certification that the tinting material complies with ASTM C979. A copy of the manufacturer’s certification shall be provided to the inspector by the supplier for acceptance purposes.

Retrieved from "https://epg.modot.org/index.php?title=Category:1056_Concrete_Tinting_Material&oldid=12401"