Difference between revisions of "Category:1066 Mortars and Grout"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (article construction)
Line 19: Line 19:
 
==1066.2 Mix Design==
 
==1066.2 Mix Design==
  
The proportions for the various grouts and mortars are specified in [http://www.modot.mo.gov/business/standards_and_specs/Sec1066.pdf Sec 1066]. The mix characteristics and batch weights (masses) may be calculated in the same manner as described for portland cement concrete in [[;category:501 Concrete|501 Concrete]].  It may be necessary to submit samples of sand to the Laboratory for determination of specific gravity and unit weight [mass], if they cannot be ascertained from the "Physical Characteristics of Principal Portland Cement Concrete Aggregates in Missouri."
+
The proportions for the various grouts and mortars are specified in [http://www.modot.mo.gov/business/standards_and_specs/Sec1066.pdf Sec 1066]. The mix characteristics and batch weights (masses) may be calculated in the same manner as described for portland cement concrete in [[:category:501 Concrete|501 Concrete]].  It may be necessary to submit samples of sand to the Laboratory for determination of specific gravity and unit weight [mass], if they cannot be ascertained from the "Physical Characteristics of Principal Portland Cement Concrete Aggregates in Missouri."
  
 
==1066.3 Sample Record==
 
==1066.3 Sample Record==

Revision as of 09:03, 26 June 2007

This article establishes procedures for inspecting and reporting grout and mortars and designing mixture. Refer to Sec 1066 for MoDOT’s specifications.

1066.1 Procedure

The components of mortar or grout are to be inspected and reported.

Mortar for Pipe Joints (for Sec 1066.2.1) Cement is to be Type I, unless otherwise specified in the contract and is to be inspected and reported in the same manner as described in 1019 Cement.

Mortar for Grout (for Sec 1066.2.2) Sand shall be clean and shall meet the quality requirements of Sec 1005 except the minus No. 200 (75 m) sieve requirement does not apply.

Mortar for Rubble and Brick Masonry (for Sec 1066.2.3) Hydrated lime is to be accepted on the basis of the bag label, manufacturer's certification, or sampling and testing. If sampled, a 5 lb. (2 kg) sample is to be obtained by taking a 1 lb. (400 g) sample from the top of no fewer than 5 bags. The individual samples are to be combined, thoroughly mixed, placed in a cement sample bag with plastic liner and submitted to the Laboratory and a record entered in SiteManager.

Expansive Mortar (for Sec 1066.2.4) Unpolished aluminum powder for use in expansive mortar is to be accepted on the basis of the container label or manufacturer's certification.

Qualified expansive mortars complying with the requirements of Sec 1066.2.4 are listed in Table 1066. Only qualified expansive mortars are to be used. If the contractor requests to use an expansive mortar not listed in Table 1066, the manufacturer of that expansive mortar will be required to submit a 50 lb. (20 kg) sample for approval, the manufacturer's specifications and general data information. The State Construction and Materials Engineer will approve or disapprove the use of the proposed expansive mortar. Upon qualification of this material, it may be accepted for use on the basis of container labeling.

Qualified rapid set concrete patching materials complying with the requirements of MSP 02-01 are listed in Qualified Rapid Set Concrete Patching Material. Refer to MSP 02-01 for more information regarding rapid set concrete patching materials.

1066.2 Mix Design

The proportions for the various grouts and mortars are specified in Sec 1066. The mix characteristics and batch weights (masses) may be calculated in the same manner as described for portland cement concrete in 501 Concrete. It may be necessary to submit samples of sand to the Laboratory for determination of specific gravity and unit weight [mass], if they cannot be ascertained from the "Physical Characteristics of Principal Portland Cement Concrete Aggregates in Missouri."

1066.3 Sample Record

Reports are to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in 106.8 Reporting Test Results, are to be included in the report to clarify conditions of acceptance or rejection.

Sand, hydrated lime, unpolished aluminum powder and non-metallic expansive mortars shall be reported through SiteManager.

Cement shall be reported as described in 1019 Cement.

1066.4 Qualified Non-Metallic Expansive Mortars

Table 1066 - Qualified Non-Metallic Expansive Mortars (1066MREM)
Brand Name Manufacturer
1107 Advantage (2/97) Dayton Superior

4226 Kansas Ave.

Kansas City, KS 66106

Bonsal Construction Grout, non-metallic (6/98) Bonsal American

8201 Arrowridge Blvd.

Charlotte, NC 28273

Bonsal C 1107 (2/05) Bonsal American

8201 Arrowridge Blvd.

Charlotte, NC 28273

Bonsal F 77 (2/05) Bonsal American

8201 Arrowridge Blvd.

Charlotte, NC 28273

Bonsal High Strength Precision Grout (2/05) Bonsal American

8201 Arrowridge Blvd.

Charlotte, NC 28273

Burke Multi Purpose Grout (8/04) Burke By Edoco

4226 Kansas Ave.

Kansas City, KS 66106

Burke Non Ferrous Non Shrink Grout (8/04) Burke By Edoco

4226 Kansas Ave.

Kansas City, KS 66106

Burke V/O Patch (8/04) Burke By Edoco

4226 Kansas Ave.

Kansas City, KS 66106

Conpatch V/O Grout (11/94) Conspec Mktg & Mfg Co., Inc.

636 South 66th Terrace

Kansas City, KS 66111

Conspec Enduro 50 Grout (6/98) Conspec Mktg & Mfg Co. Inc.

636 South 66th Terrace

Kansas City, KS 66111

Conspec 100 Non-Shrink Grout (6/98) Conspec Mktg & Mfg Co. Inc.

636 South 66th Terrace

Kansas City, KS 66111

CRD-621 Grout (6/98) Cemproco, Ltd.

3340 South Zuni Street

Englewood, CO 80110

Crystex (6/98) L&M Construction Chemicals, Inc

14852 Calhoun Rd.

Omaha, NE 68151

CW 100 Precision Grout (6/98) Carter-Waters Corp.

P. O. Box 412676

Kansas City, MO 64141

Duragrout Non-Shrink Grout (6/98) Construction Chemicals, Inc.

14851 Calhoun Road

Omaha, NE 68152

DURO-FLO Grout (6/98) Preco Industries Limited

55 Skyline Drive

Plainview, NY 11803

Euco N-S Grout (5/95) The Euclid Chemical Company

19218 Redwood Road

Cleveland, OH 44110-2799

Five-Star Non-Shrink Grout (6/98) U.S Grout Corporation

West End Avenue

Old Greenwich, CT 06870

FX-228 (6/98) Fox Industries, Inc.

3100 Falls Cliff Road

Baltimore, MD 21211

Gilco Non-Shrink Grout (6/98) Cormix Construction Chemicals

2200 E. Devon Ave. #111

Des Plaines, IL 60018

Horn Non-corrosive Non-Shrink (6/98) Grout Tamms Industries

7405 Production Drive

Mentor, OH 44060

LOKSET Cartridge (6/98) Celtite, Inc.

150 Carley Court

Georgetown, KY 40324

Masterflow 713 Grout (6/98) Master Builders

23700 Chagrin Blvd

Cleveland, OH 44118

NBEC Non-Shrink Grout (6/98) The NBEC Corporation

P.O. Box 1700

Samp Mortar Station

Greenfield Hill, CT 06430

Pro Grout 90 (6/98) CGM, Inc.

1445 Ford Road

Bensalem, PA 19020

Pro Grout 100 (4/99) CGM, Inc.

1445 Ford Road

Bensalem, PA 19020

Quikrete Non-Shrink Grout #1585 (6/98) The Quikrete Companies

500 Marathon Parkway

Lawrenceville, GA 30045

Richmond Multi-Purpose Grout (8/00) Dayton/Richmond Concrete Accessories

5025 Easton Road

St. Joseph, MO 64507

Sealtight 588 (6/98) W. R. Meadows, Inc.

P.O. Box 543

Elgin, IL 60121

Set Non-Shrink Grout (6/98) Master Builders, Inc.

23700 Chagrin Boulevard

Cleveland, OH 44122

Sika Grout 212, Non-Shrink, Non-Metallic (6/98) Sika Corporation

201 Polito Avenue

Lyndhurst, NJ 07071

Specco Superb 611 (5/95) Specco Industries

13087 Main Street

Lemont, IL 60439

Supreme Non-Shrink Grout (6/98) Cormix Construction Chemicals

2200 E. Devon Ave. #111

Des Plaines, IL 60018

Sure-Grip High Performance Grout (6/98) Dayton Superior Corporation

4226 Kansas Ave.

Kansas City, KS 66106

Symons General-Purpose (6/98) Symons Corporation

200 E. Touhy Avenue

P. O. Box 5018

Des Plaines, IL 60017-5018

Symons Multi-Purpose Construction Grout (6/98) Symons Corporation

200 E. Touhy Avenue

P. O. Box 5018

Des Plaines, IL 60017-5018

Symons Ultra-Purpose Grout (6/98) Symons Corporation

200 E. Touhy Avenue

P. O. Box 5018

Des Plaines, IL 60017-5018

Unigrout (8/04) Universal Form Clamp

840 South 25th Ave.

Bellwood, IL 60104

UPCON High Flow Grout (6/98) UPCON Company

4805 Lexington Avenue

Cleveland, OH

Utility Grout (6/98) Dayton Superior Corporation

4226 Kansas Ave.

Kansas City, KS 66106

Zip Crete (6/98) Texas Industries, Inc.

1640 Guinotte

Kansas City, KS 64120

Articles in "1066 Mortars and Grout"

This category contains only the following page.