Difference between revisions of "Category:400 FLEXIBLE PAVEMENT"

From Engineering Policy Guide
Jump to: navigation, search
Line 10: Line 10:
 
*Plant Mix Bituminous Bases and Pavements have higher stability requirements than surface leveling and are used on medium volume roads.  The general requirments for these mix types can be found in [[401 Bituminous Base and Pavement|Bituminous Base and Pavement]].
 
*Plant Mix Bituminous Bases and Pavements have higher stability requirements than surface leveling and are used on medium volume roads.  The general requirments for these mix types can be found in [[401 Bituminous Base and Pavement|Bituminous Base and Pavement]].
 
*Superpave is the most stable of all asphalt pavement types and is used on the highest volume roads.  The general requirements for Superpave mixes can be found in [[403 Asphaltic Concrete Pavement|Asphaltic Concrete Pavement]].
 
*Superpave is the most stable of all asphalt pavement types and is used on the highest volume roads.  The general requirements for Superpave mixes can be found in [[403 Asphaltic Concrete Pavement|Asphaltic Concrete Pavement]].
 +
 +
<categorytree mode=all>401 Bituminous Base and Pavement</categorytree>
 +
<categorytree mode=all>402 Bituminous Surface Leveling</categorytree>
 +
<categorytree mode=all>403 Asphaltic Concrete Pavement</categorytree>
 +
<categorytree mode=all>404 Bituminous Mixing Plants</categorytree>
 +
<categorytree mode=all>405 Processing Reclaimed Asphalt</categorytree>
 +
<categorytree mode=all>407 Tack Coat</categorytree>
 +
<categorytree mode=all>408 Prime Coat</categorytree>
 +
<categorytree mode=all>409 Seal Coat</categorytree>
 +
<categorytree mode=all>413 Surface Treatments and Preventive Maintenance</categorytree>
 +
<categorytree mode=all>450 Bituminous Pavement Design</categorytree>
 +
<categorytree mode=all>451 Rehabilitation Strategies</categorytree>
 +
<categorytree mode=all>460 General Requirements for Bituminous Construction</categorytree>
 +
<categorytree mode=all>470 Bituminous Asphalt Maintenance</categorytree>
 +
<categorytree mode=all>Alternate Pavement</categorytree>
 +
<categorytree mode=all>Paved Shoulders</categorytree>

Revision as of 11:07, 16 November 2006

Key Points

Pavements are designed, constructed, and maintained to provide adequate support for loads imposed by traffic, and to provide a uniformly firm, stable, smooth, all-weather surface. To achieve these objectives, the subgrade, base, underdrainage and pavement must function together properly so that the pavement will not fail under the predicted traffic loads. Pavements are either flexible or rigid.

Flexible pavements consist of a mixture of liquid asphalt and aggregate. There are three general categories of asphalt pavement design. Selection is based on traffic volume.

  • Plant Mix Surface Leveling mixes are our least stable mixes and are used only on lower volume roads where rutting is not expected to be an issue. The general requirements for this mix type can be found in Bituminous Surface Leveling.
  • Plant Mix Bituminous Bases and Pavements have higher stability requirements than surface leveling and are used on medium volume roads. The general requirments for these mix types can be found in Bituminous Base and Pavement.
  • Superpave is the most stable of all asphalt pavement types and is used on the highest volume roads. The general requirements for Superpave mixes can be found in Asphaltic Concrete Pavement.