Difference between revisions of "Category:400 FLEXIBLE PAVEMENT"

From Engineering_Policy_Guide
Jump to navigation Jump to search
 
(30 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{|border="4"  
+
[[image:400 Flexible Pavement.jpg|right|400px]]
 +
{|style="padding: 0.3em; margin-right:10px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="170px" align="left"  
 
|-
 
|-
|style="background:yellow"|'''[[Key Points 400 Flexible Pavement|Key Points]]'''
+
|[[image:safety begins with me.jpg|165px|center]]
 +
|-
 +
|'''Safety Video'''
 +
|-
 +
|[[media:132 Asphalt Operations.wmv|Asphalt Operations]]
 +
|}
 +
 
 +
Pavements are [[:Category:450 Bituminous Pavement Design|designed]], [[:Category:460 General Requirements for Bituminous Construction|constructed]], and [[:Category:470 Bituminous Asphalt Maintenance|maintained]] to provide adequate support for loads imposed by traffic, and to provide a uniformly firm, stable, smooth, all-weather surface.  To achieve these objectives, the [[Other Aspects of Pavement Design#Soil Characteristics|subgrade]], [[:Category:300 BASES|base]], [[:Category:605 Underdrainage|underdrainage]] and pavement must function together properly so that the pavement will not fail under the predicted traffic loads.  Pavements are either flexible or rigid.
 +
 
 +
Flexible pavements consist of a mixture of liquid asphalt and aggregate.  There are three general categories of asphalt pavement design.  Selection is based on traffic volume.
 +
 
 +
 
 +
*Plant Mix Surface Leveling mixes are our least stable mixes and are used only on lower volume roads where rutting is not expected to be an issue.  The general requirements for this mix type can be found in [[:Category:402 Bituminous Surface Leveling|Bituminous Surface Leveling]].
 +
*Plant Mix Bituminous Bases and Pavements have higher stability requirements than surface leveling and are used on medium volume roads.  The general requirments for these mix types can be found in [[:Category:401 Bituminous Base and Pavement|Bituminous Base and Pavement]].
 +
*Superpave is the most stable of all asphalt pavement types and is used on the highest volume roads.  The general requirements for Superpave mixes can be found in [[:Category:403 Asphaltic Concrete Pavement|Asphaltic Concrete Pavement]].
 +
 
 +
{|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#ffddcc" width="210px" align="right"  
 +
|-
 +
|'''Pavement Rehabilitation, Guide'''
 +
|-
 +
|[http://library.modot.mo.gov/RDT/reports/Ri00008/Brf02013.pdf Summary 2003]
 +
|-
 +
|[http://library.modot.mo.gov/RDT/reports/Ri00008/RDT02013.pdf Report 2002]
 +
|-
 +
|'''See also:''' [http://www.modot.gov/services/OR/byDate.htm Innovation Library]
 
|}
 
|}
  
Pavements are designed, constructed, and maintained to provide adequate support for loads imposed by traffic, and to provide a uniformly firm, stable, smooth, all-weather surface.  To achieve these objectives, the [[Soil Characteristics|subgrade]], [[:Category:300 BASES|base]], [[605 Underdrainage|underdrainage]] and pavement must function together properly so that the pavement will not fail under the predicted traffic loads.
 
  
Pavements are either flexible or rigid. On major road pavement contracts, alternate pavement designs are bid to maintain competition, and to ensure that the latest market rate is considered when determining pavement type.
+
<categorytree mode=all>401 Bituminous Base and Pavement</categorytree>
 +
<categorytree mode=all>402 Bituminous Surface Leveling</categorytree>
 +
<categorytree mode=all>403 Asphaltic Concrete Pavement</categorytree>
 +
<categorytree mode=all>404 Bituminous Mixing Plants</categorytree>
 +
<categorytree mode=all>405 Processing Reclaimed Asphalt</categorytree>
 +
<categorytree mode=all>407 Tack Coat</categorytree>
 +
<categorytree mode=all>408 Prime Coat</categorytree>
 +
{|style="padding: 0.3em; margin-left:7px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right"
 +
|-
 +
|EPG articles are not referenced as "sections" but as EPG XXX.X or "articles" to avoid confusion with MoDOT specs (which are contractually binding).
 +
|}
 +
<categorytree mode=all>409 Seal Coat</categorytree>
 +
<categorytree mode=all>413 Surface Treatments and Preventive Maintenance</categorytree>
 +
<categorytree mode=all>450 Bituminous Pavement Design</categorytree>
 +
<categorytree mode=all>460 General Requirements for Bituminous Construction</categorytree>
 +
<categorytree mode=all>470 Bituminous Asphalt Maintenance</categorytree>
 +
<categorytree mode=all>Shoulder Maintenance</categorytree>

Revision as of 11:32, 23 July 2018

400 Flexible Pavement.jpg
Safety begins with me.jpg
Safety Video
Asphalt Operations

Pavements are designed, constructed, and maintained to provide adequate support for loads imposed by traffic, and to provide a uniformly firm, stable, smooth, all-weather surface. To achieve these objectives, the subgrade, base, underdrainage and pavement must function together properly so that the pavement will not fail under the predicted traffic loads. Pavements are either flexible or rigid.

Flexible pavements consist of a mixture of liquid asphalt and aggregate. There are three general categories of asphalt pavement design. Selection is based on traffic volume.


  • Plant Mix Surface Leveling mixes are our least stable mixes and are used only on lower volume roads where rutting is not expected to be an issue. The general requirements for this mix type can be found in Bituminous Surface Leveling.
  • Plant Mix Bituminous Bases and Pavements have higher stability requirements than surface leveling and are used on medium volume roads. The general requirments for these mix types can be found in Bituminous Base and Pavement.
  • Superpave is the most stable of all asphalt pavement types and is used on the highest volume roads. The general requirements for Superpave mixes can be found in Asphaltic Concrete Pavement.
Pavement Rehabilitation, Guide
Summary 2003
Report 2002
See also: Innovation Library


EPG articles are not referenced as "sections" but as EPG XXX.X or "articles" to avoid confusion with MoDOT specs (which are contractually binding).