Difference between revisions of "Category:721 Concrete Crib-Type Retaining Walls Laboratory Testing Guidelines"
Jump to navigation
Jump to search
(info from lab manual) |
m (article construction) |
||
| Line 5: | Line 5: | ||
==721.2 Sample Record== | ==721.2 Sample Record== | ||
| − | Test results shall be reported through SiteManager, as described in [ | + | Test results shall be reported through SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], with the notation in the remarks, "Specimens submitted for compressive strength at the age indicated and the test results are for informational purposes only". Test results shall be reported on the appropriate templates under the Tests tab. |
Revision as of 10:43, 21 February 2008
This article establishes procedures for Laboratory testing and reporting concrete cylinders representing concrete crib-type retaining walls.
721.1 Procedure
Concrete cylinders shall be tested for compressive strength according to AASHTO T22.
721.2 Sample Record
Test results shall be reported through SiteManager, as described in Automation Section 3510, with the notation in the remarks, "Specimens submitted for compressive strength at the age indicated and the test results are for informational purposes only". Test results shall be reported on the appropriate templates under the Tests tab.
