Difference between revisions of "Category:901 Lighting"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (article construction)
m (Key Points info moved into the article for greater accessibility)
Line 1: Line 1:
{|border="4"
 
|-style="background:yellow"
 
|'''[[Key Points 901 Highway Lighting|Key Points]]'''
 
|}
 
 
 
[[image:901 Lighting.jpg|right|450px]]
 
[[image:901 Lighting.jpg|right|450px]]
  
Line 25: Line 20:
  
 
This article also includes a [[901.15 Glossary|glossary]], a discussion on the [[901.10 Preparation of Plans|preparation of plans]] and [[901.12 Electrical Components|electrical components]].
 
This article also includes a [[901.15 Glossary|glossary]], a discussion on the [[901.10 Preparation of Plans|preparation of plans]] and [[901.12 Electrical Components|electrical components]].
 +
 +
===Nonstandard Lighting Structures===
 +
If any lighting installation being considered will use a special or nonstandard structure or with dimensions exceeding those shown in the Standard Plans, [http://wwwi/intranet/tr/ Traffic] and [http://wwwi/intranet/br/default.htm Bridge] are to be consulted early in the project planning regarding the installation’s feasibility and necessary contract provisions.  Examples of this situation are high mast lighting and exceeding lengths on the Standard Plans.
 +
 +
Since designing details for nonstandard installations is typically performed by an outside engineer employed by the contractor or producer and is certified to MoDOT, the project contract documents must include appropriate requirements about the design standards used.  Since structures beyond MoDOT's standard designs are involved, a performance-based specification of the design signed and sealed by a Missouri Registered Professional Engineer is needed from the contractor.  Certification to the current AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaries and Traffic Signals including the latest fatigue provisions is required.

Revision as of 16:29, 5 March 2008

901 Lighting.jpg

Nighttime crash rates are higher than daytime rates partially due to reduced visibility. Fixed-source lighting such as a luminaire tends to reduce crashes in urban and suburban areas with concentrations of pedestrians and intersections.

Different policies apply to:

- lighting to be provided, operated and maintained at state expense,

- lighting to be provided, operated and maintained at the expense of the local political subdivision,

- lighting to be adjusted at state expense and operated and maintained at the expense of the local political subdivision,

- state participation in continuous freeway lighting by a local political subdivision,

- and lighting proposed by other political subdivisions on state highways.

When designing, installing, programming and maintaining lighting, factors such as light source and intensity and circuiting must be addressed. Guidelines for high pressure sodium luminaire performance and computation of roadway illumination, future lighting and dusk-to-dawn lighting policy are discussed in this article.

There are many aspects to be considered when inspecting construction quality and this article provides construction inspection guidelines, guidelines for material inspection and laboratory testing.

This article also includes a glossary, a discussion on the preparation of plans and electrical components.

Nonstandard Lighting Structures

If any lighting installation being considered will use a special or nonstandard structure or with dimensions exceeding those shown in the Standard Plans, Traffic and Bridge are to be consulted early in the project planning regarding the installation’s feasibility and necessary contract provisions. Examples of this situation are high mast lighting and exceeding lengths on the Standard Plans.

Since designing details for nonstandard installations is typically performed by an outside engineer employed by the contractor or producer and is certified to MoDOT, the project contract documents must include appropriate requirements about the design standards used. Since structures beyond MoDOT's standard designs are involved, a performance-based specification of the design signed and sealed by a Missouri Registered Professional Engineer is needed from the contractor. Certification to the current AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaries and Traffic Signals including the latest fatigue provisions is required.