File:751.31 Open Concrete Int Bents and Piers- Design-Column Charts Plan View.gif
Revision as of 14:26, 12 September 2019 by Smithk (talk | contribs) (Smithk uploaded a new version of File:751.31 Open Concrete Int Bents and Piers- Design-Column Charts Plan View.gif)
No higher resolution available.
751.31_Open_Concrete_Int_Bents_and_Piers-_Design-Column_Charts_Plan_View.gif (744 × 500 pixels, file size: 25 KB, MIME type: image/gif)
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 14:26, 12 September 2019 | | 744 × 500 (25 KB) | Smithk (talk | contribs) | |
| 10:45, 28 September 2007 |  | 222 × 164 (2 KB) | Tschid (talk | contribs) |
- You cannot overwrite this file.
File usage
The following 837 files are duplicates of this file (more details):
- File:1001 Table 1.gif
- File:1001 Table 2.gif
- File:1001 Table 3.gif
- File:1029.4.1.gif
- File:1029.4.2.gif
- File:1029.4.3.gif
- File:1029.4.4.gif
- File:1029.4.5.gif
- File:106.11.1.gif
- File:106.11.6.gif
- File:106.11.7.gif
- File:106.11.8.gif
- File:106.15.1.gif
- File:106.7.22.2.gif
- File:106.7.22 percent.gif
- File:106.7.35 crew.gif
- File:106.7.40.gif
- File:106.7.59.1.gif
- File:106.7.59.2.gif
- File:106.7.59.3.gif
- File:106.7.59.4.gif
- File:106.7.59.5.gif
- File:106.7.64.gif
- File:106.7.gif
- File:121.1 MPOs and RPCs.gif
- File:121.2.1 Transportation Planning Process.gif
- File:123.1 Mo NHS Map.GIF
- File:136 2010.gif
- File:231 Typical Section Elements.GIF
- File:237.6.8 ITS monitors.gif
- File:320.1 Guide for Slope Recommendations.gif
- File:320.3 M-40 Request for Drilling Service.gif
- File:320.3 M-40 Request for Drilling Services.gif
- File:320.4 M-40a Request for Final Soundings of Structures.gif
- File:320.4 M-40b Sounding Layout.gif
- File:6-2b.gif
- File:616.10.1 MoDOT districts.gif
- File:616.16.1 MoDOT districts.gif
- File:616.19.2.2.gif
- File:616.2.4 POP Sign 36x48.gif
- File:616.2.4 POP Sign 96x48.gif
- File:616.20 Flagger Guidelines.gif
- File:616.20 Single and two flaggers.gif
- File:616.20 Traffic Control Techniques.gif
- File:616.20 preferred and emergency.gif
- File:616.20 two flaggers.gif
- File:616.2 Safety Emphasis.gif
- File:620.12 Alignment - bowing.gif
- File:620.12 Alignment - centerline.gif
- File:620.12 Alignment - grooved area.gif
- File:620.12 Alignment - longitudinal.gif
- File:620.12 Job Tracking.gif
- File:620.12 Lane Closure of Interior Lane on Multi-Use Highways.gif
- File:620.12 Lane Closure on Left or Right Lane on Divided Highway.gif
- File:620.12 Materials Tracking.gif
- File:620.12 Moving Operation on Highway Open to Traffic.gif
- File:620.12 Work in Vicinity of Entrance Ramp.gif
- File:620.12 Work in Vicinity of Exit Ramp.gif
- File:620.2 Bridge Edge Line Striping.gif
- File:620.2 Bridge Edge Line Striping b.gif
- File:620.2 Disabled Parking Areas.gif
- File:620.2 Disabled Parking Areas b.gif
- File:620.2 Disabled Symbol Detail.gif
- File:620.2 Edge Line Striping - Clover Leaf Interchange.gif
- File:620.2 Edge Line Striping - Diamond Interchange.gif
- File:620.2 Edge Line Striping for At Grade Intersections.gif
- File:620.2 Elongated Letters for ONLY Pavement Markings (MUTCD Fig. 3B-20).gif
- File:620.2 Example of Reversible Lane Marking Application.gif
- File:620.2 Example of Two-Way, Left-Turn Marking Applications (MUTCD Fig. 3B-7).gif
- File:620.2 Examples of Arrow Markings at Exit Ramp Terminals (MUTCD Fig. 3B-23).gif
- File:620.2 Examples of Channelizing Line Applications for Entrance Ramp Markings (MUTCD Fig. 3B-9).gif
- File:620.2 Examples of Channelizing Line Applications for Entrance Ramp Markings (MUTCD Fig. 3B-9)b.gif
- File:620.2 Examples of Channelizing Line Applications for Exit Ramp Markings (MUTCD Fig. 3B-8).gif
- File:620.2 Examples of Channelizing Line Applications for Exit Ramp Markings (MUTCD Fig. 3B-8)b.gif
- File:620.2 Examples of Crosswalk Markings (MUTCD Fig. 3B-16).gif
- File:620.2 Examples of Crosswalk Markings (MUTCD Fig. 3B-22).gif
- File:620.2 Examples of Four-Lane Undivided, Two-Way Marking Applications (MUTCD Fig. 3B-2).gif
- File:620.2 Examples of Lane Drop Markings at Exit Ramps (MUTCD Fig. 3B.10).gif
- File:620.2 Examples of Lane Reduction Arrow (MUTCD Fig. 3B-21).gif
- File:620.2 Examples of Markings for Obstructions in the Roadway (MUTCD Fig. 3B-13).gif
- File:620.2 Examples of Markings for Obstructions in the Roadway (MUTCD Fig. 3B-13) b.gif
- File:620.2 Examples of Markings for Roundabout Intersections with One-Lane Approaches (MUTCD Fig. 3B-27).gif
- File:620.2 Examples of Markings for Roundabout Intersections with Two-Lane Approaches (MUTCD Fig. 3B-28).gif
- File:620.2 Examples of Parking Space Markings (MUTCD Fig. 3B-18).gif
- File:620.2 Examples of Three-Lane, Two-Way Marking Applications (MUTCD Fig. 3B-3).gif
- File:620.2 Examples of Two-Lane, Two-Way Marking Applications (MUTCD Fig. 3B-1).gif
- File:620.2 Examples of Yield Line Layouts (MUTCD Fig. 3B-14).gif
- File:620.2 Examples of Yield Lines at Unsignalized Midblock Crosswalks (MUTCD Fig. 3B-15).gif
- File:620.2 International Symbol of Accessibility Parking Space Marking with Blue Background and White Border Options (MUTCD Fig. 3B-19).gif
- File:620.2 Marking for Median Islands for Left Turn Bays.gif
- File:620.2 Marking of Two Way Ramps.gif
- File:620.2 Markings for Dual Left Turn Lanes.gif
- File:620.2 Markings for Pavment Transitions.gif
- File:620.2 Markings for Pavment Transitions b.gif
- File:620.2 Markings for Pavment Transitions c.gif
- File:620.2 Markings for Pavment Transitions d.gif
- File:620.2 Pavement Marking for Aircraft Speed Check Stations.gif
- File:620.2 Spacing of Arrows in Left Turn Lanes.gif
- File:620.2 Standard Pavement Markings for Climbing Lanes (MUTCD Fig. 3B-6).gif
- File:620.2 Typical Hash Bar Markings.gif
- File:620.2 Typical Markings for Barrier Curb.gif
- File:620.2 Yield Ahead Triangle Symbols (MUTCD Fig. 3B-25).gif
- File:620.3 Marking of Objects Adjacent to Roadway.gif
- File:620.3 Object Markers (MUTCD Fig. 3C-1).gif
- File:620.3 Standard Application of Type 3 Object Markers Obstruction Width Less Than Two Feet Wider Than Pavement.gif
- File:620.3 Standard Application of Type 3 Object Markers Obstruction Width Less Than Two Feet Wider Than Pavement b.gif
- File:620.3 Standard Application of Type 3 Object Markers Obstruction Width Less Than Two Feet Wider Than Pavement c.gif
- File:620.3 Standard Application of Type 3 Object Markers at Pavement Width Transition.gif
- File:620.3 Standard Mounting Heights for Object Markers.gif
- File:620.3 Typical Application of Reflective Paint Along Concrete Bridge Railings.gif
- File:620.3 Typical Application of Reflective Paint Along Flush Bridge Railings.gif
- File:620.3 Typical Application of Reflective Paint on Bridges with Steel Rails.gif
- File:620.3 Typical Application of Reflective Paint on Concrete Bridge Abutments.gif
- File:620.3 Typical Application of Reflective Paint on Steel Truss Bridges.gif
- File:620.4 Examples of Delineator Placement (MUTCD Fig. 3D-1).gif
- File:620.4 Installation of Delineators on Public Side Roads and Private Entrances.gif
- File:620.4 Standard Mounting Height for Delineators.gif
- File:620.7 Markings for Islands Painted and Raised.gif
- File:620.8 Four Lane, Divided Roadways - Laneline and or Left Edgeline Striping.gif
- File:620.8 Four Lane, Divided Roadways - Right Edgeline Striping.gif
- File:620.8 Four Lane, Undivided Roadways - Centerline and or Laneline Striping.gif
- File:620.8 Four Lane, Undivided Roadways - Edgeline Striping.gif
- File:620.8 Paint Barrel Decal (R11-31).gif
- File:620.8 Two Lane, Two Way Roadways - Centerline Edgeline Striping.gif
- File:643.4 Maintenance Responsibilities.gif
- File:703 Doc Record Footing Elev.gif
- File:712.1.4 welding safety tips.gif
- File:712 Form B-179.gif
- File:712 Form B-711.gif
- File:712 Welder Qualification Report.gif
- File:712 Welder Qualification Test 1.gif
- File:712 Welder Qualification Test 2.gif
- File:712 Welder Qualification Test 3.gif
- File:712 Welder Qualification Test 4.gif
- File:712 Welder Qualification Test 5.gif
- File:748.6 Figure Design High Water.gif
- File:750.3 Bottom of Footing Placement.gif
- File:751.1.2.31 FHWA flowchart.gif
- File:751.10 Epoxy coated reinforcement in backwall.gif
- File:751.10 PART OF PLAN VIEW SHOWING STATIONS AND PROFILE GRADE ELEVATIONS.gif
- File:751.10 Panels - square ends - int bent - steel structure.gif
- File:751.10 Panels - square ends - int end bent - steel structure.gif
- File:751.10 bottom of slab elevation table continuous spans.gif
- File:751.10 bottom of slab elevation table simple spans.gif
- File:751.10 detail a (precast panels).gif
- File:751.10 double drip bevel.gif
- File:751.10 elevation of drain bulb-tee 3ft8in+ cantilever.gif
- File:751.10 elevation of drain bulb-tee 3ft8in- cantilever.gif
- File:751.10 elevation of drain cont conc structure.gif
- File:751.10 elevation of drain psi and steel structure.gif
- File:751.10 panels - section a-a.gif
- File:751.10 panels - section a-a steel structure.gif
- File:751.10 panels - section b-b steel structure.gif
- File:751.10 panels - section thru cantilever.gif
- File:751.10 panels - section thru cantilever steel structure.gif
- File:751.10 panels - section thru const joint.gif
- File:751.10 panels - skewed ends - end bent - steel structure.gif
- File:751.10 panels - skewed ends - int bent exp gap - steel structure.gif
- File:751.10 panels - skewed ends - int end bent - steel structure.gif
- File:751.10 panels - skewed ends - prestressed structures.gif
- File:751.10 panels - square ends - end bent - steel structure.gif
- File:751.10 panels - square ends - prestressed structures.gif
- File:751.10 part elevation of junction box in wing.gif
- File:751.10 part plan of slab drain solid slab structure.gif
- File:751.10 part plan of slab drain voided slab structure.gif
- File:751.10 part section a-a junction box in wing.gif
- File:751.10 part section of slab drain bulb tee 3ft8in+ cantilever.gif
- File:751.10 part section of slab drain bulb tee 3ft8in- cantilever.gif
- File:751.10 part section of slab drain cont conc structure.gif
- File:751.10 part section of slab drain psi structure.gif
- File:751.10 part section of slab drain steel structure.gif
- File:751.10 part section of suspended conduit at drain.gif
- File:751.10 part section of suspended conduit at drain detail a.gif
- File:751.10 part section showing bracket assembly bulb-tee.gif
- File:751.10 part section showing bracket assembly parrallel.gif
- File:751.10 part section showing bracket assembly transverse psi.gif
- File:751.10 part section showing bracket assembly transverse steel.gif
- File:751.10 plan of drain psi and steel structure.gif
- File:751.10 plan of precast prestressed panel.gif
- File:751.10 plan of precast prestressed panel (skewed end-option).gif
- File:751.10 plan of slab drain bulb-tee 3ft8in- cantilever.gif
- File:751.10 section a-a stay-in-place forms (steel girders).gif
- File:751.10 section b-b (precast panels).gif
- File:751.10 section of conduit in barrier curb.gif
- File:751.10 section of conduit in slab.gif
- File:751.10 section of junction box in barrier curb.gif
- File:751.10 section of junction box in slab.gif
- File:751.10 section of multiple conduit encased in slab.gif
- File:751.10 section of multiple conduit in barrier curb.gif
- File:751.10 single drip bevel.gif
- File:751.10 stay-in-place forms (steel girders).gif
- File:751.10 typical cip construction joint.gif
- File:751.10 typical precast panel construction joint.gif
- File:751.10 typical slab elevations diagram.gif
- File:751.10 vertical curve information.gif
- File:751.11 Anchor Bolt Details.gif
- File:751.11 Anchor Bolt Part Plan- TOB.gif
- File:751.11 Elastomeric Bearings for PSI- PlanView BoltDiameter.gif
- File:751.11 Elastomeric Bearings for PSI- SectA SideView.gif
- File:751.11 Girder Chairs Detail A.gif
- File:751.11 Girder Chairs Front and Side Elevation.gif
- File:751.11 Laminated Bearings for Steel- PlanView BoltDiameter.gif
- File:751.11 Laminated Bearings for Steel- SectA SideView.gif
- File:751.11 Laminated Fixed Bearings for Steel- PlanView BoltDiameter.gif
- File:751.11 Laminated Fixed Bearings for Steel- SectA SideView.gif
- File:751.11 PTFE Bearings Sliding PlanView BoltDiameter.gif
- File:751.11 PTFE Bearings Sliding SectA SideView.gif
- File:751.11 PTFE Bearings Sliding SectionEndOfGirder.gif
- File:751.11 PTFE Bearings Sliding SectionThruGirder-Notes.gif
- File:751.11 PTFE Bearings Sliding SectionThruGirder.gif
- File:751.11 Swedge Anchor Bolt-Notes.gif
- File:751.12 16in safety barrier curb 1.75 in wearing surface.gif
- File:751.12 16in safety barrier curb 2.25 in wearing surface.gif
- File:751.12 16in safety barrier curb no wearing surface.gif
- File:751.12 16in standard safety barrier curb no wearing surface.gif
- File:751.12 cont conc slab end bent elevation of barrier curb.gif
- File:751.12 cont conc slab end bent end elevation of barrier curb.gif
- File:751.12 cont conc slab end bent k1.gif
- File:751.12 cont conc slab end bent k10.gif
- File:751.12 cont conc slab end bent k11.gif
- File:751.12 cont conc slab end bent k2.gif
- File:751.12 cont conc slab end bent k3.gif
- File:751.12 cont conc slab end bent k4.gif
- File:751.12 cont conc slab end bent k5.gif
- File:751.12 cont conc slab end bent k6.gif
- File:751.12 cont conc slab end bent k7.gif
- File:751.12 cont conc slab end bent k8.gif
- File:751.12 cont conc slab end bent k9.gif
- File:751.12 cont conc slab end bent section a-a.gif
- File:751.12 cont conc slab end bent section b-b.gif
- File:751.12 cont conc slab end bent section c-c.gif
- File:751.12 details of mounting light poles-part plan1.gif
- File:751.12 details of mounting light poles-part plan2.gif
- File:751.12 details of mounting light poles-section a-a.gif
- File:751.12 details of mounting light poles-section b-b.gif
- File:751.12 details of mounting light poles-section b-b 2010.gif
- File:751.12 details of mounting light poles bar shape 10.gif
- File:751.12 details of mounting light poles bar shape 13.gif
- File:751.12 details of mounting light poles bar shape 30.gif
- File:751.12 expansion device movement guage details-elevation view of movement guage.gif
- File:751.12 expansion device movement guage details-plan view of movement guage.gif
- File:751.12 guard rail attachment detail auxiliary view.gif
- File:751.12 guard rail attachment detail part elevation.gif
- File:751.12 guard rail attachment detail part elevation a-a.gif
- File:751.12 guard rail attachment detail part plan.gif
- File:751.12 integral end bent elevation of barrier curb.gif
- File:751.12 integral end bent end elevation of barrier curb.gif
- File:751.12 integral end bent k1.gif
- File:751.12 integral end bent k10.gif
- File:751.12 integral end bent k11.gif
- File:751.12 integral end bent k12.gif
- File:751.12 integral end bent k2.gif
- File:751.12 integral end bent k3.gif
- File:751.12 integral end bent k4.gif
- File:751.12 integral end bent k5.gif
- File:751.12 integral end bent k6.gif
- File:751.12 integral end bent k7.gif
- File:751.12 integral end bent k8.gif
- File:751.12 integral end bent k9.gif
- File:751.12 integral end bent section a-a.gif
- File:751.12 integral end bent section b-b.gif
- File:751.12 integral end bent section c-c.gif
- File:751.12 joint and rustication details all types of cont structure elevation.gif
- File:751.12 joint and rustication details optional slip-form all types of cont structure elevation.gif
- File:751.12 joint and rustication details optional slip-form part plan continuous structures.gif
- File:751.12 joint and rustication details optional slip-form section thru joint and section a-a.gif
- File:751.12 joint and rustication details part section showing rustication details.gif
- File:751.12 joint and rustication details plan of curb joints.gif
- File:751.12 non-integral end bent elevation of barrier curb.gif
- File:751.12 non-integral end bent end elevation of barrier curb.gif
- File:751.12 non-integral end bent k1.gif
- File:751.12 non-integral end bent k10.gif
- File:751.12 non-integral end bent k11.gif
- File:751.12 non-integral end bent k2.gif
- File:751.12 non-integral end bent k3.gif
- File:751.12 non-integral end bent k4.gif
- File:751.12 non-integral end bent k5.gif
- File:751.12 non-integral end bent k6.gif
- File:751.12 non-integral end bent k7.gif
- File:751.12 non-integral end bent k8.gif
- File:751.12 non-integral end bent k9.gif
- File:751.12 non-integral end bent section a-a.gif
- File:751.12 non-integral end bent section b-b.gif
- File:751.12 non-integral end bent section c-c.gif
- File:751.12 optional slip-form barrier section a-a.gif
- File:751.12 pedestrian overpass-(112in) curved top fence.gif
- File:751.12 pedestrian overpass-(112in) curved top fence details of expansion gap.gif
- File:751.12 pedestrian overpass-(112in) curved top fence section a-a.gif
- File:751.12 pedestrian overpass-(112in) curved top fence typical section near splice gap.gif
- File:751.12 pedestrian overpass-details of expansion device gap.gif
- File:751.12 pedestrian overpass-details of handrail bracket.gif
- File:751.12 pedestrian overpass-plan of floor plate.gif
- File:751.12 pedestrian overpass-rail post connection (floor plate).gif
- File:751.12 pedestrian overpass-superstructure at or near end panel.gif
- File:751.12 pedestrian overpass-superstructure near steps.gif
- File:751.12 pedestrian overpass-typical section near splice gap.gif
- File:751.12 plastic waterstop on bridge filled joint detail.gif
- File:751.12 r-bar 1.75 in wearing surface.gif
- File:751.12 r-bar 2.25 in wearing surface.gif
- File:751.12 r-bar no wearing surface.gif
- File:751.12 r-bar permissible shape 1.75 in wearing surface.gif
- File:751.12 r-bar permissible shape 2.25 in wearing surface.gif
- File:751.12 r-bar permissible shape no wearing surface.gif
- File:751.12 r1-bar no wearing surface.gif
- File:751.12 r2-bar no wearing surface.gif
- File:751.12 r3-bar 1.75 in wearing surface.gif
- File:751.12 r3-bar 2.25 in wearing surface.gif
- File:751.12 r3-bar no wearing surface.gif
- File:751.12 r4-bar 1.75 in wearing surface.gif
- File:751.12 r4-bar 2.25 in wearing surface.gif
- File:751.12 r4-bar no wearing surface.gif
- File:751.12 safety barrier curb dimensions.gif
- File:751.12 safety barrier curb on integral end bent.gif
- File:751.12 safety barrier curb on non-integral end bent.gif
- File:751.12 section at end bent (optional slip-form barrier).gif
- File:751.12 section near joint (optional slip-form barrier).gif
- File:751.12 semi-deep abutment elevation of barrier curb.gif
- File:751.12 semi-deep abutment end elevation of barrier curb.gif
- File:751.12 semi-deep abutment k1.gif
- File:751.12 semi-deep abutment k10.gif
- File:751.12 semi-deep abutment k11.gif
- File:751.12 semi-deep abutment k12.gif
- File:751.12 semi-deep abutment k2.gif
- File:751.12 semi-deep abutment k3.gif
- File:751.12 semi-deep abutment k4.gif
- File:751.12 semi-deep abutment k5.gif
- File:751.12 semi-deep abutment k6.gif
- File:751.12 semi-deep abutment k7.gif
- File:751.12 semi-deep abutment k8.gif
- File:751.12 semi-deep abutment k9.gif
- File:751.12 semi-deep abutment section a-a.gif
- File:751.12 semi-deep abutment section b-b.gif
- File:751.12 semi-deep abutment section c-c.gif
- File:751.12 semi-deep abutment section d-d.gif
- File:751.12 superelevation details-section thru superelevated approach slab at integral end bent.gif
- File:751.12 superelevation details-section thru superelevated approach slab at non-integral end bent.gif
- File:751.12 superelevation details-section thru superelevated slab.gif
- File:751.13.4 Strip Seal Expansion Joint- Longitudinal Axis.gif
- File:751.13.5.2 End Bent.gif
- File:751.13.5.2 Int Bent.gif
- File:751.13.5.3 End Bent.gif
- File:751.13.5.3 Int Bent.gif
- File:751.13 Barrier Curb Details-.gif
- File:751.13 Barrier Curb Details-Preformed Compression Seal Part Section A-A.gif
- File:751.13 Barrier Curb Details-Preformed Compression Seal Part Section B-B.gif
- File:751.13 Barrier Curb Details- Beveled Curb Bent Plate Section C-C.gif
- File:751.13 Barrier Curb Details- Part Elevation at Beveled Curb Bent Plate- Section C-C.gif
- File:751.13 Barrier Curb Details- Part Elevation at Beveled Curb Bent Plate.gif
- File:751.13 Barrier Curb Details- Part Elevation at End of Barrier Curb.gif
- File:751.13 Barrier Curb Details- Part Elevation at End of Beveled Curb Bent Plate.gif
- File:751.13 Barrier Curb Details- Part Elevation of Barrier Curb.gif
- File:751.13 Barrier Curb Details- Part Section A-A.gif
- File:751.13 Barrier Curb Details- Part Section B-B.gif
- File:751.13 Barrier Curb Details- Part Section Thru Curb Showing Preformed Compression Seal.gif
- File:751.13 Barrier Curb Details- Part Section thru Barrier Curb Joint.gif
- File:751.13 Barrier Curb Details- Preformed Compression Seal Skewed Structure.gif
- File:751.13 Barrier Curb Details- Preformed Compression Seal Square Structure.gif
- File:751.13 Details of Substructure Protection- Part Elevation & Section A-A.gif
- File:751.13 Double Faced Median Barrier Bridge Curb-Part Elevation at End of Beveled Curb Bent Plate.gif
- File:751.13 Double Faced Median Barrier Bridge Curb-Part Elevation at End of Beveled Curb Bent Plate S.gif
- File:751.13 Double Faced Median Barrier Bridge Curb-Part Elevation at End of Beveled Curb Bent Plate Section C-C.gif
- File:751.13 Double Faced Median Barrier Bridge Curb-Part Elevation of Barrier Curb.gif
- File:751.13 Double Faced Median Barrier Bridge Curb-Typical Part Section A-A.gif
- File:751.13 Double Faced Median Barrier Bridge Curb-Typical Part Section B-B.gif
- File:751.13 Double Faced Median Barrier Bridge Curb- Part Elev at Beveled Curb Bent Plate.gif
- File:751.13 Double Faced Median Barrier Bridge Curb- Part Elev at Beveled Curb Bent Plate Section C-C.gif
- File:751.13 Double Faced Median Barrier Bridge Curb- Part Elev of Barrier Curb.gif
- File:751.13 Double Faced Median Barrier Bridge Curb- Typ Part Section A-A.gif
- File:751.13 Double Faced Median Barrier Bridge Curb- Typ Part Section B-B.gif
- File:751.13 Expansion Device Details at End Bents for Prestress Structures- Detail A.gif
- File:751.13 Expansion Device Details at End Bents for Prestress Structures- Detail B.gif
- File:751.13 Expansion Device Details at End Bents for Prestress Structures- Part Plan.gif
- File:751.13 Expansion Device Details at End Bents for Prestress Structures- Section B- B.gif
- File:751.13 Expansion Device Details at End Bents for Steel Structures- Detail A.gif
- File:751.13 Expansion Device Details at End Bents for Steel Structures- Detail B.gif
- File:751.13 Expansion Device Details at End Bents for Steel Structures- Part Plan.gif
- File:751.13 Expansion Device Details at End Bents for Steel Structures- Section thru Joint.gif
- File:751.13 Expansion Device Details at Int Bents for Steel Structures- Detail A.gif
- File:751.13 Expansion Device Details at Int Bents for Steel Structures- Detail B.gif
- File:751.13 Expansion Device Details at Int Bents for Steel Structures- Part Plan.gif
- File:751.13 Expansion Device Details at Int Bents for Steel Structures- Section thru Joint.gif
- File:751.13 Expansion Length Diagram.gif
- File:751.13 Finger Plate Expansion Joint- Int Bent- Part Section Thru Expansion Device- Prestress to 2.gif
- File:751.13 Finger Plate Expansion Joint- Int Bent- Part Section Thru Expansion Device- Prestress to S.gif
- File:751.13 Finger Plate Expansion Joint- Median Barrier Curb- Elev at Beveled Curb Bent Plate- Sectio.gif
- File:751.13 Finger Plate Expansion Joint- Plan of Plate Skewed.gif
- File:751.13 Finger Plate Expansion Joint- Plan of Plate Square.gif
- File:751.13 Flat Plate Expansion Joint- Barrier Curb-Elev of Barrier Curb.gif
- File:751.13 Flat Plate Expansion Joint- Barrier Curb-Part Section A-A.gif
- File:751.13 Flat Plate Expansion Joint- Barrier Curb- Part Elev Beveled Curb Bent Plate.gif
- File:751.13 Flat Plate Expansion Joint- Barrier Curb- Part Elev Beveled Curb Bent Plate Section C-C.gif
- File:751.13 Flat Plate Expansion Joint- Barrier Curb- Section B-B.gif
- File:751.13 Flat Plate Expansion Joint- Field Splice- Angle and Bar.gif
- File:751.13 Flat Plate Expansion Joint- Field Splice- Part Plan.gif
- File:751.13 Flat Plate Expansion Joint- Field Splice- Roadway Plate.gif
- File:751.13 Flat Plate Expansion Joint- Plan of Beam at Bearings-Detail A.gif
- File:751.13 Flat Plate Expansion Joint- Plan of Beam at Bearings-Intermediate Bents.gif
- File:751.13 Flat Plate Expansion Joint- Plan of Beam at Bearings-Notes.gif
- File:751.13 Flat Plate Expansion Joint- Plan of Beam at Bearings- End Bents.gif
- File:751.13 Flat Plate Expansion Joint- Plan of Beam at Bearings- Part Plan Backwall.gif
- File:751.13 Flat Plate Expansion Joint- Typ Aligning Bolt & Bevel Plate- Bevel Plate.gif
- File:751.13 Flat Plate Expansion Joint- Typ Aligning Bolt & Bevel Plate- Part Plan.gif
- File:751.13 Flat Plate Expansion Joint- Typ Aligning Bolt & Bevel Plate- Part Section Bevel Plate.gif
- File:751.13 Flat Plate Expansion Joint- Typ Aligning Bolt & Bevel Plate- Section A-A.gif
- File:751.13 Flat Plate Expansion Joint- Typ Part Plan for Prestress- At End Bent.gif
- File:751.13 Flat Plate Expansion Joint- Typ Part Plan for Prestress- At Int Bent.gif
- File:751.13 Flat Plate Expansion Joint- Typ Part Plan for Steel- At End Bent.gif
- File:751.13 Flat Plate Expansion Joint- Typ Part Plan for Steel- At Int Bent.gif
- File:751.13 Flat Plate Expansion Joint System- Prestress Structure Details- Legend.gif
- File:751.13 Flat Plate Expansion Joint System- Prestress Structure Details- Part Section at End Bent.gif
- File:751.13 Flat Plate Expansion Joint System- Prestress Structure Details- Part Section at Int Bent.gif
- File:751.13 Flat Plate Expansion Joint System- Steel Structure Details-Legend.gif
- File:751.13 Flat Plate Expansion Joint System- Steel Structure Details- Part Section at End Bent.gif
- File:751.13 Flat Plate Expansion Joint System- Steel Structure Details- Part Section at Int Bent.gif
- File:751.13 Performed Compression Joint Seal- Section Thru Joint.gif
- File:751.13 Performed Compression Seal Extension Joint Seal- Steel Structure Details at End Bents.gif
- File:751.13 Polymer Concrete- Detail A.gif
- File:751.13 Polymer Concrete- Detail of Shear Connector.gif
- File:751.13 Polymer Concrete- Detail of Sinusoidal Bar.gif
- File:751.13 Preformed Compression Joint Seal- Part Cross Section.gif
- File:751.13 Preformed Compression Joint Seal- Table of Transverse Bridge Seal Dimensions.gif
- File:751.13 Prestressed Structure Details- Detail A.gif
- File:751.13 Prestressed Structure Details- Detail B.gif
- File:751.13 Prestressed Structure Details- Part Plan.gif
- File:751.13 Prestressed Structure Details- Section B-B.gif
- File:751.13 Safety Barrier Curb at End Bents- Elevation.gif
- File:751.13 Safety Barrier Curb at End Bents- Part Plan B-B Skew.gif
- File:751.13 Safety Barrier Curb at End Bents- Part Plan B-B Square.gif
- File:751.13 Safety Barrier Curb at End Bents- Part Section A-A.gif
- File:751.13 Sidewalk Details- Part Section A-A.gif
- File:751.13 Steel Structure Details at End Bents- Detail A.gif
- File:751.13 Steel Structure Details at End Bents- Detail B.gif
- File:751.13 Steel Structure Details at End Bents- Part Plan.gif
- File:751.13 Steel Structure Details at End Bents- Section B-B.gif
- File:751.13 Strip Seal Expansion Joint- Detail of Gland.gif
- File:751.13 Strip Seal Expansion Joint- Detail of Joint Armor.gif
- File:751.13 Strip Seal Expansion Joint System-Barrier Curb Details-Part Elev at End of Beveled Bent Pl.gif
- File:751.13 Strip Seal Expansion Joint System-Barrier Curb Details-Part Elev at End of Beveled Bent Plate.gif
- File:751.13 Strip Seal Expansion Joint System-Barrier Curb Details-Part Section B-B.gif
- File:751.13 Strip Seal Expansion Joint System-Barrier Curb Details-Section C-C.gif
- File:751.13 Strip Seal Expansion Joint System-Barrier Curb Details-Section thru Joint.gif
- File:751.13 Strip Seal Expansion Joint System-Barrier Curb Details-Skewed Bridge Part Plan.gif
- File:751.13 Strip Seal Expansion Joint System-Barrier Curb Details-Square Bridge Part Plan.gif
- File:751.13 Strip Seal Expansion Joint System- Barrier Curb Details-Part Elev of Barrier Curb.gif
- File:751.13 Strip Seal Expansion Joint System- Barrier Curb Details-Part Section A-A.gif
- File:751.13 Strip Seal Expansion Joint System- Barrier Curb Details at End Bent- Elevation.gif
- File:751.13 Strip Seal Expansion Joint System- Barrier Curb Details at End Bent- Part Section A-A.gif
- File:751.13 Strip Seal Expansion Joint System- Barrier Curb Details at End Bent- Part Section B-B Skew.gif
- File:751.13 Strip Seal Expansion Joint System- Barrier Curb Details at End Bent- Part Section B-B Squa.gif
- File:751.13 Strip Seal Expansion Joint System- Dbl Faced Median Barrier Curb- Part Elevation at End of.gif
- File:751.13 Strip Seal Expansion Joint System- Dbl Faced Median Barrier Curb- Part Elevation at End of Beveled Curb Bent Plate.gif
- File:751.13 Strip Seal Expansion Joint System- Dbl Faced Median Barrier Curb- Part Elevation of Barrie.gif
- File:751.13 Strip Seal Expansion Joint System- Dbl Faced Median Barrier Curb- Part Elevation of Barrier Curb.gif
- File:751.13 Strip Seal Expansion Joint System- Dbl Faced Median Barrier Curb- Section C-C.gif
- File:751.13 Strip Seal Expansion Joint System- Dbl Faced Median Barrier Curb- Typ Part Section A-A.gif
- File:751.13 Strip Seal Expansion Joint System- Dbl Faced Median Barrier Curb- Typical Part Section B-B.gif
- File:751.13 Strip Seal Expansion Joint System- Joint System Details at End Bent Detail A.gif
- File:751.13 Strip Seal Expansion Joint System- Joint System Details at End Bent Detail B.gif
- File:751.13 Strip Seal Expansion Joint System- Joint System Details at End Bent Part Plan.gif
- File:751.13 Strip Seal Expansion Joint System- Joint System Details at End Bent Section B-B.gif
- File:751.13 Strip Seal Expansion Joint System- Joint System Details at Int Bent Detail A.gif
- File:751.13 Strip Seal Expansion Joint System- Joint System Details at Int Bent Detail B.gif
- File:751.13 Strip Seal Expansion Joint System- Joint System Details at Int Bent Part Plan.gif
- File:751.13 Strip Seal Expansion Joint System- Joint System Details at Int Bent Section B-B.gif
- File:751.13 Strip Seal Expansion Joint System- No Drainage System End Bents- Option 1.gif
- File:751.13 Strip Seal Expansion Joint System- One Piece Drain System End Bent- Option 2- Side Elevati.gif
- File:751.13 Strip Seal Expansion Joint System- One Piece Drain System Split Median Barrier Curb- Optio.gif
- File:751.13 Strip Seal Expansion Joint System- One Piece Drain System Split Median Barrier Curb at En2.gif
- File:751.13 Strip Seal Expansion Joint System- One Piece Drain System Split Median Barrier Curb at End.gif
- File:751.13 Strip Seal Expansion Joint System- One Piece Drain System Split Median Barrier Curb at End Bent- Option 2- Front El.gif
- File:751.13 Strip Seal Expansion Joint System- One Piece Drain System Split Median Barrier Curb at End Bent- Option 2- Section .gif
- File:751.13 Strip Seal Expansion Joint System- One Piece Drain System Split Median Barrier Curb at Int.gif
- File:751.13 Strip Seal Expansion Joint System- Sidewalk Details- Part Section Thru Center.gif
- File:751.13 Strip Seal Expansion Joint System- Three Piece Drain System Split Median Barrier Curb at I.gif
- File:751.13 Strip Seal Expansion Joint system- Sidewalk Details- Part Section A-A.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at End Bents De2.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at End Bents Det.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at End Bents Detail A.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at End Bents Detail B.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at End Bents Par.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at End Bents Part Plan.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at End Bents Sec.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at End Bents Section B-B.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at Int Bents De2.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at Int Bents Det.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at Int Bents Detail A.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at Int Bents Detail B.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at Int Bents Par.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at Int Bents Part Plan.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at Int Bents Sec.gif
- File:751.13 Strip Seal and Expansion Joint System- Joint System Details for Prestress at Int Bents Section B-B.gif
- File:751.13 Transverse Bridge Sealant Dimensions- Cross Section thru Joint.gif
- File:751.13 Typical Part Plans- Skewed Structure.gif
- File:751.13 Typical Part Plans- Square Structure.gif
- File:751.13 circled 2.gif
- File:751.14 End Diaphragm Connections for W27 thru W40 Beams.gif
- File:751.14 End Diaphragms – All Skews-Cross Frames – Skews Thru 20°.gif
- File:751.14 End Diaphragms – Skews Over 25° Thru 45°.gif
- File:751.14 End Diaphragms – Skews Over 45°.gif
- File:751.14 End Diaphragms – Skews Thru 25°-Cross Frames – Skews Thru 20°.gif
- File:751.14 Intermediate Diaphragm Connection Plate (Optional. Design required.).gif
- File:751.14 Intermediate Diaphragm Connection Plate (Preferred Detail. Design required.).gif
- File:751.14 bearing stiffener connections - end diaphragms or cross frames attached optional.gif
- File:751.14 bearing stiffener connections - end diaphragms or cross frames attached preferred.gif
- File:751.14 bearing stiffener connections - no end diaphragms or cross frames attached.gif
- File:751.14 connection a1.gif
- File:751.14 connection d.gif
- File:751.14 critical dimensions for checking thread exclusion in .875in dia high strength bolted conne.gif
- File:751.14 detail of shear connector.gif
- File:751.14 details thru bevel plate for int web stiffener-brg stiffener-and int diaphragm connection .gif
- File:751.14 diaphragm connection at stiffener detail.gif
- File:751.14 diaphragm connection at stiffener detail Mar 2011.gif
- File:751.14 diaphragm fill plate detail - optional.gif
- File:751.14 diaphragm fill plate detail - optional Mar 2011.gif
- File:751.14 diaphragm fill plate detail - preferred.gif
- File:751.14 diaphragm fill plate detail - preferred Mar 2011.gif
- File:751.14 end diaphragm - 36in thru 40in webs detail d.gif
- File:751.14 end diaphragm - 42in thru 48in webs detail e.gif
- File:751.14 end diaphragm - 42in thru 48in webs detail e Mar 2011.gif
- File:751.14 end diaphragm - webs over 48in detail a.gif
- File:751.14 end diaphragm - webs over 48in detail a Mar 2011.gif
- File:751.14 end diaphragm - webs over 48in detail c.gif
- File:751.14 end diaphragm - webs over 48in detail c Mar 2011.gif
- File:751.14 end diaphragm - webs over 48in structure with finger plate expansion device detail a.gif
- File:751.14 end diaphragm - webs over 48in structure with finger plate expansion device detail a Mar 2011.gif
- File:751.14 end diaphragm - webs over 48in structure with finger plate expansion device detail d.gif
- File:751.14 end diaphragm - webs over 48in structure with finger plate expansion device detail d Mar 2011.gif
- File:751.14 int web stiffener (one side only) variable flange width.gif
- File:751.14 lateral bracing detail a.gif
- File:751.14 lateral bracing detail a Mar 2011.gif
- File:751.14 longitudinal web stiffener (one side only).gif
- File:751.14 section thru stringer or girder with and without cover plate.gif
- File:751.1 Figure 1 Probability Mass Functions.gif
- File:751.1 Figure 2 Cumulative Distribution Function.gif
- File:751.1 Figure 3 (a) PDF and (b) CDF.gif
- File:751.1 M-40a Prelim Design request for final soundings.gif
- File:751.1 M-40b Prelim Design soundings layout.gif
- File:751.1 Prelim Design Acceptable Rail No. 1.gif
- File:751.1 Prelim Design Acceptable Rail No. 2.gif
- File:751.1 Prelim Design Acceptable Rail No. 3.gif
- File:751.1 Prelim Design Acceptable Rail No. 4.gif
- File:751.1 Prelim Design Acceptable Rail No. 5.gif
- File:751.1 Prelim Design Attached Temp Barrier.gif
- File:751.1 Prelim Design Blockout on Exist Curb No. 1.gif
- File:751.1 Prelim Design Blockout on Exist Curb No. 2.gif
- File:751.1 Prelim Design Blockout on Exist Curb No. 3.gif
- File:751.1 Prelim Design Blockout on Exist Curb No. 4.gif
- File:751.1 Prelim Design Bridge Memo (Ex 2 Pg 1).gif
- File:751.1 Prelim Design Bridge Memo (Ex 2 Pg 2).gif
- File:751.1 Prelim Design Constructability Questionnaire.gif
- File:751.1 Prelim Design Free Standing Temp Barrier.gif
- File:751.1 Prelim Design Holes for New BR Anchor Attachment Elev AA No. 1.gif
- File:751.1 Prelim Design Holes for New BR Anchor Attachment Elev AA No. 2.gif
- File:751.1 Prelim Design Holes for New BR Anchor Attachment Part Elev No 1.gif
- File:751.1 Prelim Design Holes for New BR Anchor Attachment Part Elev No 2.gif
- File:751.1 Prelim Design SI&A form (pg 1).gif
- File:751.1 Prelim Design SI&A form (pg 2).gif
- File:751.1 Prelim Design request for final soundings.gif
- File:751.1 Prelim Design soundings layout.gif
- File:751.20 cont conc slab longitudinal sections solid slab end span.gif
- File:751.22 B1 & B2 Bar.gif
- File:751.22 B1 Bar Alternate.gif
- File:751.22 Beam Type 2 Girders Group II.gif
- File:751.22 Beam Type 2 Girders dim & Group I.gif
- File:751.22 Bent Up Strands.gif
- File:751.22 C1 Bar.gif
- File:751.22 C1 Bar Type 7.gif
- File:751.22 Closed Int Bent Diaphragms Chamfer & Joint Filler Detail.gif
- File:751.22 Closed Int Bent Diaphragms Chamfer & Joint Filler Section.gif
- File:751.22 Closed Int Bent Diaphragms Change in Height at Fixed Bents Girder Chair Details Part End E.gif
- File:751.22 Closed Int Bent Diaphragms Change in Height at Fixed Bents Girder Chair Details Part End Elevation.gif
- File:751.22 Closed Int Bent Diaphragms Change in Height at Fixed Bents Girder Chair Details Part Front.gif
- File:751.22 Closed Int Bent Diaphragms Change in Height at Fixed Bents Girder Chair Details Part Front Elevation.gif
- File:751.22 Closed Int Bent Diaphragms Detail of Key.gif
- File:751.22 Closed Int Bent Diaphragms Dim Part Elevations.gif
- File:751.22 Closed Int Bent Diaphragms Dim Part Plan.gif
- File:751.22 Closed Int Bent Diaphragms Dim Part Plan Showing Jt Filler.gif
- File:751.22 Closed Int Bent Diaphragms Edge Distance Change in Height at Fixed Bents Part Plan Skewed.gif
- File:751.22 Closed Int Bent Diaphragms Reinf Change in Height at Fixed Bents Part Section AA Thru Diap.gif
- File:751.22 Closed Int Bent Expansion Diaphragms Dim Part Elevations.gif
- File:751.22 Closed Int Bent Expansion Diaphragms Dim Part Longitudinal Elevation.gif
- File:751.22 Closed Int Bent Expansion Diaphragms Dim Part Plan.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Skewed Structures Over 25 Deg.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Skewed Structures Part Elevations.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Skewed Structures Part Plan.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Skewed Structures Thru 25 Deg.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Square Structures Part Elevation AA.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Square Structures Part Elevations.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Square Structures Part Plan.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Square Structures Section Thru Diaphr.gif
- File:751.22 Closed Int Bent Fixed and Expansion Diaphragms Reinf Square Structures Section Thru Diaphragm.gif
- File:751.22 Coil Ties Part Elevations.gif
- File:751.22 D1 Bar.gif
- File:751.22 Dowel Bars Elevation & Section AA.gif
- File:751.22 Intermediate Diaphragms Details A & B.gif
- File:751.22 Intermediate Diaphragms Details A & B enlarged.gif
- File:751.22 Intermediate Diaphragms Part Elevation.gif
- File:751.22 Intermediate Diaphragms Part Section.gif
- File:751.22 Intermediate Diaphragms Section EE.gif
- File:751.22 Intermediate Diaphragms Sections CC & DD.gif
- File:751.22 Intermediate Diaphragms Sections CC & DD enlarged.gif
- File:751.22 Mild Steel Reinforcement.gif
- File:751.22 Non Integral End Bent Diaphragms No Exp Device Coil Tie Rods Part Elevation.gif
- File:751.22 Non Integral End Bent Diaphragms No Exp Device Coil Tie Rods Part Section & Details.gif
- File:751.22 Non Integral End Bent Diaphragms No Exp Device Dim Part Elevations.gif
- File:751.22 Non Integral End Bent Diaphragms No Exp Device Dim Part Plan.gif
- File:751.22 Non Integral End Bent Diaphragms No Exp Device Dim Part Section.gif
- File:751.22 Non Integral End Bent Diaphragms with Exp Device Coil Tie Rods Part Elevation.gif
- File:751.22 Non Integral End Bent Diaphragms with Exp Device Dim Part Elevations.gif
- File:751.22 Non Integral End Bent Diaphragms with Exp Device Dim Part Plan.gif
- File:751.22 Non Integral End Bent Diaphragms with Exp Device Dim Part Section.gif
- File:751.22 Non Integral Intermediate Bent Diaphragm with Exp Device Coil Tie Rod Part Elevation.gif
- File:751.22 Non Integral Intermediate Bent Diaphragm with Exp Device Dim Part Elevation.gif
- File:751.22 Non Integral Intermediate Bent Diaphragm with Exp Device Dim Part Plan.gif
- File:751.22 Non Integral Intermediate Bent Diaphragm with Exp Device Dim Section.gif
- File:751.22 Non Integral Intermediate Bent Diaphragm with Finger Plate Exp Device Reinf Closed Diaphra.gif
- File:751.22 Open Int Bent Diaphragms Coil Tie Rod Part Elevation.gif
- File:751.22 Open Int Bent Diaphragms Coil Tie Rod Part Section AA Details.gif
- File:751.22 Open Int Bent Diaphragms Dim Part Elevations.gif
- File:751.22 Open Int Bent Diaphragms Dim Part Plan.gif
- File:751.22 Open Int Bent Diaphragms Dim Part Section.gif
- File:751.22 Open Int Bent Diaphragms Reinf Part Elevations.gif
- File:751.22 Open Int Bent Diaphragms Reinf Part Plan.gif
- File:751.22 Open Int Bent Diaphragms Reinf Part Section.gif
- File:751.22 Standard PSI Girder End Section.gif
- File:751.22 Theoretical Slab Haunching Diagram.gif
- File:751.22 anchorage zone and confinement reinforcement.gif
- File:751.22 coping detail.gif
- File:751.22 dim NU girders 29 35.gif
- File:751.22 dim NU girders 43 53.gif
- File:751.22 dim NU girders 63 70.gif
- File:751.22 dim NU girders 78 94.gif
- File:751.22 span & structure lengths integral end bents.gif
- File:751.22 span & structure lengths integral end bents Mar 2011.gif
- File:751.22 span & structure lengths non integral end bents.gif
- File:751.22 span & structure lengths non integral end bents Mar 2011.gif
- File:751.22 typ continuous PS structure Integral End Bents.gif
- File:751.2 Application of live load to slab.gif
- File:751.31 Open Concrete Int Bents and Piers- Details- Optional Section for Column- Web Beam Joint- D.gif
- File:751.31 Open Concrete Int Bents and Piers- Details- Optional Section for Column- Web Beam Joint- E.gif
- File:751.31 Open Concrete Int Bents and Piers- Details- Optional Section for Column- Web Beam Joint- P.gif
- File:751.31 Open Concrete Int Bents and Piers- Elevations for Intermediated Bent with Web Beam.gif
- File:751.31 Open Concrete Int Bents and Piers- Elevations for Intermediated Bent with Web Beam and Tie.gif
- File:751.31 Open Concrete Int Bents and Piers- Elevations for Intermediated Bent with Web Beam and Tie Beam.gif
- File:751.31 Open Concrete Int Bents and Piers- Reinforcement- Collision Wall Elevation Track on Both S.gif
- File:751.31 Open Concrete Int Bents and Piers- Reinforcement- Collision Wall Elevation Track on One Si.gif
- File:751.31 Open Concrete Int Bents and Piers- Reinforcement- Collision Wall Section A-A Track on One .gif
- File:751.31 Open Concrete Int Bents and Piers- Reinforcement- Collision Wall Section B-B Track on Both.gif
- File:751.31 Open Concrete Int Bents and Piers- Reinforcement- Column- No Seismic.gif
- File:751.31 Open Concrete Int Bents and Piers- Reinforcement- Longitudinal Beam Steps.gif
- File:751.31 Open Concrete Int Bents and Piers- Reinforcement- Seismic Zone 1 Column .gif
- File:751.31 Open Concrete Int Bents and Piers- Reinforcement- Tie Beam- Seismic Zone 1- Part Elevatio2.gif
- File:751.32 details-part elevation.gif
- File:751.32 details-part section.gif
- File:751.32 reinforcement-longitudinal beam steps.gif
- File:751.34 construction joints and keys-part section a-a.gif
- File:751.34 elevation of detached wing.gif
- File:751.34 elevation of non-integral end bent.gif
- File:751.34 elevation of safety barrier curb.gif
- File:751.34 elevation of wing.gif
- File:751.34 part section at centerline.gif
- File:751.34 safety barrier curb and dimension a-sections near left wing.gif
- File:751.35 circled 9.gif
- File:751.35 details-section at end of girder.gif
- File:751.35 details-section at end of stringer.gif
- File:751.35 prestressed girder end bent-detail of keyed const jt.gif
- File:751.35 prestressed girder end bent-elevation.gif
- File:751.35 prestressed girder end bent-plan (skewed).gif
- File:751.35 prestressed girder end bent-plan (square).gif
- File:751.35 prestressed girder end bent-section a-a.gif
- File:751.35 prestressed girder end bent-section near wing.gif
- File:751.35 prestressed girders-part section near end bent.gif
- File:751.35 prestressed girders-section a-a.gif
- File:751.35 prestressed girders-section b-b.gif
- File:751.35 prestressed girders-section c-c.gif
- File:751.35 prestressed girders-section d-d.gif
- File:751.35 steel girder or beam end bent-detail of keyed const jt.gif
- File:751.35 steel girder or beam end bent-elevation.gif
- File:751.35 steel girder or beam end bent-plan (skewed).gif
- File:751.35 steel girder or beam end bent-plan (square).gif
- File:751.35 steel girder or beam end bent-section a-a.gif
- File:751.35 steel girder or beam end bent-section near wing.gif
- File:751.35 vertical drains-detail b.gif
- File:751.35 vertical drains-detail c.gif
- File:751.35 vertical drains-elevation at end bent.gif
- File:751.35 vertical drains-elevation of wing.gif
- File:751.35 vertical drains-elevation of wing1.gif
- File:751.35 vertical drains-part plan.gif
- File:751.35 vertical drains-section a-a.gif
- File:751.35 wide flange and plate girders-part section near end bent.gif
- File:751.35 wide flange and plate girders-section a-a.gif
- File:751.35 wide flange and plate girders-section b-b.gif
- File:751.35 wide flange and plate girders-section c-c.gif
- File:751.35 wide flange and plate girders-section d-d.gif
- File:751.35 wide flanges-plate girders and prestressed girders-elevation of wing.gif
- File:751.35 wide flanges-plate girders and prestressed girders-part plan - skewed end bent.gif
- File:751.35 wide flanges-plate girders and prestressed girders-part plan of skewed end bent.gif
- File:751.35 wide flanges-plate girders and prestressed girders-part plan of square end bent.gif
- File:751.35 wide flanges-plate girders and prestressed girders-part section thru end of wing.gif
- File:751.35 wide flanges-plate girders and prestressed girders-part section thru wing.gif
- File:751.35 wide flanges-plate girders and prestressed girders-section a-a (square).gif
- File:751.35 wide flanges-plate girders and prestressed girders-section thru skewed end bent.gif
- File:751.35 wide flanges-plate girders and prestressed girders-section thru square end bent.gif
- File:751.35 wings and detached wing walls-detached wing.gif
- File:751.35 wings and detached wing walls-detail b.gif
- File:751.35 wings and detached wing walls-detail c.gif
- File:751.35 wings and detached wing walls-section a-a.gif
- File:751.35 wings and detached wing walls-section d-d.gif
- File:751.35 wings and detached wing walls-wing.gif
- File:751.38 Bearing Pressure.gif
- File:751.38 Dimensions Front Elevation.gif
- File:751.38 Dimensions Side Elevation.gif
- File:751.38 Footing Load Details.gif
- File:751.39 seal course.gif
- File:751.40 Conc Pile Cap Int Bents Sway Bracing (Alternate Steel Pile).gif
- File:751.40 Conc Pile Cap Int Bents Sway Bracing (Steel & CIP Pile).gif
- File:751.40 Deck Repair (total surface hydro demolition).gif
- File:751.40 Deck Repair (with exist wearing surface CL span)(Hydro demolition) Full Depth Repair.gif
- File:751.40 Deck Repair (with exist wearing surface CL span)(Hydro demolition) Full Depth Repair in Pa.gif
- File:751.40 Deck Repair (with exist wearing surface CL span)(Hydro demolition) Full Depth Repair in Partial Depth Repair.gif
- File:751.40 Deck Repair (with exist wearing surface CL span)(Hydro demolition) Partial Depth Repair.gif
- File:751.40 Deck Repair (with exist wearing surface CL span) Full Depth Repair.gif
- File:751.40 Deck Repair (with exist wearing surface CL span) Full Depth Repair in Half-Soled Area.gif
- File:751.40 Deck Repair (with exist wearing surface CL span) Half-Soled Area.gif
- File:751.40 Deck Repair (without exist wearing surface CL span)(Hydro demolition) Full Depth Repair.gif
- File:751.40 Deck Repair (without exist wearing surface CL span)(Hydro demolition) Full Depth Repair in.gif
- File:751.40 Deck Repair (without exist wearing surface CL span)(Hydro demolition) Full Depth Repair in Partial Depth Repair.gif
- File:751.40 Deck Repair (without exist wearing surface CL span)(Hydro demolition) Partial Depth Repair.gif
- File:751.40 Deck Repair (without exist wearing surface CL span).gif
- File:751.40 Deck Repair (without exist wearing surface CL span) Full Depth Area.gif
- File:751.40 Deck Repair (without exist wearing surface CL span) Full Depth Repair in Half-Soled Area.gif
- File:751.40 Deck Repair (without exist wearing surface CL span) Half-Soled Area.gif
- File:751.40 Filled Joints Section Thru Joint.gif
- File:751.40 Filled Joints Section Thru Joint (Asphaltic Concrete Overlay) no 1.gif
- File:751.40 Filled Joints Section Thru Joint (Asphaltic Concrete Overlay) no 2.gif
- File:751.40 Filled Joints Section Thru Joint (Epoxy Polymer Concrete Overlay) no 1.gif
- File:751.40 Filled Joints Section Thru Joint (Epoxy Polymer Concrete Overlay) no 2.gif
- File:751.40 Replacement of Existing Curb (Safety Barrier Curb on Slab) Section Thru Curb Optional Anch.gif
- File:751.40 Replacement of Existing Curb (Safety Barrier Curb on Wing) Section Thru Curb Optional Anch.gif
- File:751.40 Replacement of Existing Curb at End of Wing (Integral End Bents) Anchor Systems at Section.gif
- File:751.40 Replacement of Existing Curb at End of Wing (Non-Integral End Bents) Anchor Systems at Sec.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (Optional System 4) Part Section.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 2) Detail B.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 2) Details of Post.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 2) Part Elevation 1.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 2) Part Elevation 2.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 2) Part Section.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 2) Section AA.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 2) Section CC.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 2) Section DD.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 3) .5 in Plate.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 3) Detail B.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 3) Details of Post.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 3) Part Section.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 3) Post Plate Washer.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 3) Post Stiffener.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 3) Section AA.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 3) Top View.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 4) Details of Post.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 4) Optional Tie Connection.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 4) Part Section.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 4) Part Section Thru Plate.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 4) Plan of Bent Plate.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 4) Post Plate Washer.gif
- File:751.40 Replacement of Existing Curb with Thrie Beam Rail (System 4) Post Stiffener.gif
- File:751.40 Slab Drain Details (Details for Raising Scuppers) Plan of Grate Support and Scupper Extens.gif
- File:751.40 Substructure Repair.gif
- File:751.40 Temporary Traffic Control Device Section Thru Roadway.gif
- File:751.40 circled 6.gif
- File:751.40 concrete wearing surface-typical elevation of exist curb outlet showing limits of epoxy se.gif
- File:751.40 general superstructure-Geometrics for Hanger Beam Connections for Bridges on Crown Vertica.gif
- File:751.40 general superstructure-Geometrics for Hanger Beam Connections for Bridges on Sag Vertical .gif
- File:751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Crown Vertic2.gif
- File:751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Crown Vertica.gif
- File:751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Sag Vertical2.gif
- File:751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Sag Vertical .gif
- File:751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Straight, Plu.gif
- File:751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Symmetrical V.gif
- File:751.40 general superstructure-Geometrics for Pin Plate Connections for Bridges on Crown Vertical .gif
- File:751.40 general superstructure-Geometrics for Pin Plate Connections for Bridges on Sag Vertical Cu.gif
- File:751.40 general superstructure-longitudinal sections-no expansion device at end bent(not on grade).gif
- File:751.40 general superstructure-longitudinal sections-point of rotation of bearings-flat plate bear.gif
- File:751.40 general superstructure-longitudinal sections-point of rotation of bearings-prestressed str.gif
- File:751.40 general superstructure-longitudinal sections-point of rotation of bearings-steel structure.gif
- File:751.40 general superstructure-longitudinal sections-point of rotation of bearings-type c bearing .gif
- File:751.40 prestressed concrete i-girders-miscellaneous details-exp device support holes part elevati.gif
- File:751.40 reinforcement- Development and Tension Lap Splice Lengths - Other Than Top Bars (Fy = 60 .gif
- File:751.5 120 135 150 degree bend detail.gif
- File:751.5 135 degree stirrup hook.gif
- File:751.5 30 45 60 degree bend detail.gif
- File:751.5 90 degree stirrup hook.gif
- File:751.5 Bench Mark.gif
- File:751.5 Boring Data.gif
- File:751.5 Construction Change Details.gif
- File:751.5 Coordinating Substructure on Tangent Alignment.gif
- File:751.5 Dual Lane Structure Tied at Intersection.gif
- File:751.5 Dual Lane Structures Tied at Fill Face of End Bent.gif
- File:751.5 Filled Joint Detail.gif
- File:751.5 Finished Ground Line.gif
- File:751.5 arrow-side continuous fillet welding.gif
- File:751.5 back fs.gif
- File:751.5 back ns.gif
- File:751.5 back welding symbol.gif
- File:751.5 backing spacer.gif
- File:751.5 backing welding symbol.gif
- File:751.5 bar bending diagram.gif
- File:751.5 bevel bs.gif
- File:751.5 bevel fs.gif
- File:751.5 bevel ns.gif
- File:751.5 both-side continuous fillet welding.gif
- File:751.5 butt joint.gif
- File:751.5 chain intermittent fillet welding symbol.gif
- File:751.5 complete penetration.gif
- File:751.5 consumable insert.gif
- File:751.5 convex contour symbol.gif
- File:751.5 corner joint.gif
- File:751.5 detail of steel pile splice.gif
- File:751.5 details near free edge or const joint.gif
- File:751.5 development and tension lap splice lengths-bars in compression.gif
- File:751.5 development and tension lap splice lengths-other than top bars.gif
- File:751.5 development and tension lap splice lengths-top bars.gif
- File:751.5 development of non-epoxy coated grade 40 deformed bars in tension.gif
- File:751.5 development of standard hooks in tension.gif
- File:751.5 double-bevel-groove welding symbol.gif
- File:751.5 double-fillet welding symbol.gif
- File:751.5 edge flange welding symbol.gif
- File:751.5 edge joint.gif
- File:751.5 field weld.gif
- File:751.5 fillet bs.gif
- File:751.5 fillet fs.gif
- File:751.5 fillet ns.gif
- File:751.5 fillet welds with abrupt changes in direction.gif
- File:751.5 flange corner fs.gif
- File:751.5 flange corner ns.gif
- File:751.5 flange edge fs.gif
- File:751.5 flange edge ns.gif
- File:Figure 106.7.20.3.gif
There are no pages that use this file.
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
b.gif){kind=link}
.gif){kind=link}
b.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
_b.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
_curved_top_fence.gif){kind=link}
_curved_top_fence_details_of_expansion_gap.gif){kind=link}
_curved_top_fence_section_a-a.gif){kind=link}
_curved_top_fence_typical_section_near_splice_gap.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
_variable_flange_width.gif){kind=link}
.gif){kind=link}
_PDF_and_(b)_CDF.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
.gif){kind=link}
(Hydro_demolition)_Full_Depth_Repair.gif){kind=link}
(Hydro_demolition)_Full_Depth_Repair_in_Pa.gif){kind=link}
(Hydro_demolition)_Full_Depth_Repair_in_Partial_Depth_Repair.gif){kind=link}
(Hydro_demolition)_Partial_Depth_Repair.gif){kind=link}
_Full_Depth_Repair.gif){kind=link}
_Full_Depth_Repair_in_Half-Soled_Area.gif){kind=link}
_Half-Soled_Area.gif){kind=link}
(Hydro_demolition)_Full_Depth_Repair.gif){kind=link}
(Hydro_demolition)_Full_Depth_Repair_in.gif){kind=link}
(Hydro_demolition)_Full_Depth_Repair_in_Partial_Depth_Repair.gif){kind=link}
(Hydro_demolition)_Partial_Depth_Repair.gif){kind=link}
.gif){kind=link}
_Full_Depth_Area.gif){kind=link}
_Full_Depth_Repair_in_Half-Soled_Area.gif){kind=link}
_Half-Soled_Area.gif){kind=link}
_no_1.gif){kind=link}
_no_2.gif){kind=link}
_no_1.gif){kind=link}
_no_2.gif){kind=link}
_Section_Thru_Curb_Optional_Anch.gif){kind=link}
_Section_Thru_Curb_Optional_Anch.gif){kind=link}
_Anchor_Systems_at_Section.gif){kind=link}
_Anchor_Systems_at_Sec.gif){kind=link}
_Part_Section.gif){kind=link}
_Detail_B.gif){kind=link}
_Details_of_Post.gif){kind=link}
_Part_Elevation_1.gif){kind=link}
_Part_Elevation_2.gif){kind=link}
_Part_Section.gif){kind=link}
_Section_AA.gif){kind=link}
_Section_CC.gif){kind=link}
_Section_DD.gif){kind=link}
_.5_in_Plate.gif){kind=link}
_Detail_B.gif){kind=link}
_Details_of_Post.gif){kind=link}
_Part_Section.gif){kind=link}
_Post_Plate_Washer.gif){kind=link}
_Post_Stiffener.gif){kind=link}
_Section_AA.gif){kind=link}
_Top_View.gif){kind=link}
_Details_of_Post.gif){kind=link}
_Optional_Tie_Connection.gif){kind=link}
_Part_Section.gif){kind=link}
_Part_Section_Thru_Plate.gif){kind=link}
_Plan_of_Bent_Plate.gif){kind=link}
_Post_Plate_Washer.gif){kind=link}
_Post_Stiffener.gif){kind=link}
_Plan_of_Grate_Support_and_Scupper_Extens.gif){kind=link}
.gif){kind=link}
