616.18 Work Zone Speed Limits - Revision history

Hoskir: Renamed, renumbered article due to MUTCD updates (See Special Ballot)

2026-01-08T17:36:11Z

Renamed, renumbered article due to MUTCD updates (See Special Ballot)

← Older revision		Revision as of 12:36, 8 January 2026
Line 4:		Line 4:

	Should a reduced speed limit be deemed appropriate, the following table shows the recommended maximum speed reductions that may be imposed in temporary traffic control zones.		Should a reduced speed limit be deemed appropriate, the following table shows the recommended maximum speed reductions that may be imposed in temporary traffic control zones.
	~~===<center>Table 616.12 Recommended Maximum Speed Reductions</center>===~~
	{\| border="1" class="wikitable" style="margin: 1em auto 1em auto"		{\| border="1" class="wikitable" style="margin: 1em auto 1em auto"
	\|+		\|+ Table 616.18 Recommended Maximum Speed Reductions
	! style="background:#BEBEBE" width="300"\|Activity (i.e. Workers, Equipment or Material) Location !! style="background:#BEBEBE" colspan="2" width="300"\|Recommended Work Zone Speed Reduction (When Applicable)		! style="background:#BEBEBE" width="300"\|Activity (i.e. Workers, Equipment or Material) Location !! style="background:#BEBEBE" colspan="2" width="300"\|Recommended Work Zone Speed Reduction (When Applicable)
	\|-		\|-
Line 28:		Line 28:
	:* Posted work zone speed limit shall not be below 35 mph, except when local ordinance provides for a lower speed. The lower speed shall be used when applicable.		:* Posted work zone speed limit shall not be below 35 mph, except when local ordinance provides for a lower speed. The lower speed shall be used when applicable.
	:* Appropriate warning signs with advisory speed plaques should be used to advise of any specialized situations (i.e., temporary bypass, narrow lanes, etc.).		:* Appropriate warning signs with advisory speed plaques should be used to advise of any specialized situations (i.e., temporary bypass, narrow lanes, etc.).
	:* For approved speed reductions greater than 10 mph, additional notification should be provided through the use of the SPEED LIMIT XX AHEAD sign. Refer to [[#616.12.3 Work Zone SPEED LIMIT Figures\|EPG 616.12.3 Work Zone SPEED LIMIT Figures]].		:* For approved speed reductions greater than 10 mph, additional notification should be provided through the use of the SPEED LIMIT XX AHEAD sign. Refer to [[#616.18.3 Work Zone SPEED LIMIT Figures\|EPG 616.18.3 Work Zone SPEED LIMIT Figures]].
	:* For approved speed reductions greater than 20 mph, the speed limit should be reduced in two stages. Refer to [[#616.12.3 Work Zone SPEED LIMIT Figures\|EPG 616.12.3 Work Zone SPEED LIMIT Figures]].		:* For approved speed reductions greater than 20 mph, the speed limit should be reduced in two stages. Refer to [[#616.18.3 Work Zone SPEED LIMIT Figures\|EPG 616.18.3 Work Zone SPEED LIMIT Figures]].

	==616.12.1 WORK ZONE FINE Sign (CONST-3A)==		==616.18.1 WORK ZONE FINE Sign (CONST-3A)==
	{\|style="padding: 0.3em; margin-left:10px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="350px" align="right"		{\|style="padding: 0.3em; margin-left:10px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="350px" align="right"
	\|-		\|-
Line 44:		Line 44:
	If a lane closure is used on a roadway with two lanes in the direction of travel, two DO NOT PASS and two PASS WITH CARE signs and two CONST-3X, (SPEEDING/PASSING) plates shall be specified. WORK ZONE plaques shall be specified for all DO NOT PASS signs being used as part of the work zone signing sequence. If a lane closure is used on a roadway with three or more lanes in the direction of travel, the DO NOT PASS and PASS WITH CARE signs and SPEEDING/PASSING plates shall not be specified.		If a lane closure is used on a roadway with two lanes in the direction of travel, two DO NOT PASS and two PASS WITH CARE signs and two CONST-3X, (SPEEDING/PASSING) plates shall be specified. WORK ZONE plaques shall be specified for all DO NOT PASS signs being used as part of the work zone signing sequence. If a lane closure is used on a roadway with three or more lanes in the direction of travel, the DO NOT PASS and PASS WITH CARE signs and SPEEDING/PASSING plates shall not be specified.

	==616.12.2 Sign Descriptions and Applications==		==616.18.2 Sign Descriptions and Applications==

	Sign descriptions and applications are located in [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)\|EPG 616.6 Temporary Traffic Control Zone Devices]].		Sign descriptions and applications are located in [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)\|EPG 616.6 Temporary Traffic Control Zone Devices]].

	==616.12.3 Work Zone SPEED LIMIT Figures==		==616.18.3 Work Zone SPEED LIMIT Figures==


	{\|style="border:8px solid #000000; background:#f5f5f5" align="center" width="850"		{\|style="border:8px solid #000000; background:#f5f5f5" align="center" width="850"
	\|-		\|-
	\|[[media:616.12.3.1.pdf\|Fig. 616.12.3.1, Work Zone SPEED LIMIT Locations within Advance Warning Area]]		\|[[media:616.12.3.1.pdf\|Fig. 616.18.3.1, Work Zone SPEED LIMIT Locations within Advance Warning Area]]
	\|-		\|-
	\|[[media:616.12.3.2.pdf\|Fig. 616.12.3.2, Work Zone SPEED LIMIT Locations within Activity Area]]		\|[[media:616.12.3.2.pdf\|Fig. 616.18.3.2, Work Zone SPEED LIMIT Locations within Activity Area]]
	\|-		\|-
	\|[[media:616.12.3.3 2017.pdf\|Fig. 616.12.3.3, Work Zone FINE Sign and SPEED LIMIT Locations within Advance Warning Area]]		\|[[media:616.12.3.3 2017.pdf\|Fig. 616.18.3.3, Work Zone FINE Sign and SPEED LIMIT Locations within Advance Warning Area]]
	\|-		\|-
	\|[[media:616.12.3.4.pdf\|Fig. 616.12.3.4, Work Zone SPEED LIMIT Locations for Reductions Greater than 20 mph and Reduction in Two Locations]]		\|[[media:616.12.3.4.pdf\|Fig. 616.18.3.4, Work Zone SPEED LIMIT Locations for Reductions Greater than 20 mph and Reduction in Two Locations]]
	\|-		\|-
	\|[[media:616.12.3.5.pdf\|Fig. 616.12.3.5, Work Speed Limit Locations within a Lane Closure on Two-Lane Road Using Flaggers]]		\|[[media:616.12.3.5.pdf\|Fig. 616.18.3.5, Work Speed Limit Locations within a Lane Closure on Two-Lane Road Using Flaggers]]
	\|}		\|}


			[[Category:616 Temporary Traffic Control (MUTCD Part 6)\|616.18]]


	[[Category:616 Temporary Traffic Control]]

Hoskir: Hoskir moved page 616.12 Work Zone Speed Limits to 616.18 Work Zone Speed Limits: renumbered and renamed due to MUTCD Update (See Special Ballot)

2026-01-08T17:32:12Z

Hoskir moved page 616.12 Work Zone Speed Limits to 616.18 Work Zone Speed Limits: renumbered and renamed due to MUTCD Update (See Special Ballot)

← Older revision	Revision as of 12:32, 8 January 2026
(No difference)

Smithk: /* 616.12.1 WORK ZONE FINE Sign (CONST-3A) */ Per TS, updated link

2020-08-14T14:16:49Z

616.12.1 WORK ZONE FINE Sign (CONST-3A): Per TS, updated link

← Older revision		Revision as of 09:16, 14 August 2020
Line 34:		Line 34:
	{\|style="padding: 0.3em; margin-left:10px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="350px" align="right"		{\|style="padding: 0.3em; margin-left:10px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="350px" align="right"
	\|-		\|-
	\|'''Additional Info<br/>About Signs Required for Assessing Fines<br/> [~~http~~://~~www.moga~~.mo.gov/~~mostatutes~~/~~stathtml/30400005821~~.~~HTML~~ RSMo 304.582.1]		\|'''Additional Info<br/>About Signs Required for Assessing Fines<br/> [https://revisor.mo.gov/main/OneSection.aspx?section=304.582 RSMo 304.582.1]
	\|}		\|}
	The WORK ZONE FINE sign shall be specified on projects where all the following criteria are met:		The WORK ZONE FINE sign shall be specified on projects where all the following criteria are met:

EPGsysop: /* 616.12.3 Work Zone SPEED LIMIT Figures */ Per TS, revised Fig. 616.12.3.3 to include the “MERGE” sign.

2017-10-31T17:24:26Z

616.12.3 Work Zone SPEED LIMIT Figures: Per TS, revised Fig. 616.12.3.3 to include the “MERGE” sign.

← Older revision		Revision as of 12:24, 31 October 2017
Line 57:		Line 57:
	\|[[media:616.12.3.2.pdf\|Fig. 616.12.3.2, Work Zone SPEED LIMIT Locations within Activity Area]]		\|[[media:616.12.3.2.pdf\|Fig. 616.12.3.2, Work Zone SPEED LIMIT Locations within Activity Area]]
	\|-		\|-
	\|[[media:616.12.3.3.pdf\|Fig. 616.12.3.3, Work Zone FINE Sign and SPEED LIMIT Locations within Advance Warning Area]]		\|[[media:616.12.3.3 2017.pdf\|Fig. 616.12.3.3, Work Zone FINE Sign and SPEED LIMIT Locations within Advance Warning Area]]
	\|-		\|-
	\|[[media:616.12.3.4.pdf\|Fig. 616.12.3.4, Work Zone SPEED LIMIT Locations for Reductions Greater than 20 mph and Reduction in Two Locations]]		\|[[media:616.12.3.4.pdf\|Fig. 616.12.3.4, Work Zone SPEED LIMIT Locations for Reductions Greater than 20 mph and Reduction in Two Locations]]

Smithk: /* 616.12.2 Sign Descriptions and Applications */ Per TS, updated link

2016-07-11T12:18:22Z

616.12.2 Sign Descriptions and Applications: Per TS, updated link

← Older revision		Revision as of 07:18, 11 July 2016
Line 46:		Line 46:
	==616.12.2 Sign Descriptions and Applications==		==616.12.2 Sign Descriptions and Applications==

	Sign descriptions and applications are located in [[616.~~2 Work~~ Zone ~~Signing and Applications~~\|EPG 616.~~2 Work~~ Zone ~~Signing and Applications~~]].		Sign descriptions and applications are located in [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)\|EPG 616.6 Temporary Traffic Control Zone Devices]].

	==616.12.3 Work Zone SPEED LIMIT Figures==		==616.12.3 Work Zone SPEED LIMIT Figures==

Smithk: /* 616.12.1 WORK ZONE FINE Sign (CONST-3A) */Per TS, to conform with other guidance and MUTCD, removed requirement that PASS WITH CARE signs should have a work zone plaque mounted above them.

2016-07-01T17:01:29Z

616.12.1 WORK ZONE FINE Sign (CONST-3A): Per TS, to conform with other guidance and MUTCD, removed requirement that PASS WITH CARE signs should have a work zone plaque mounted above them.

← Older revision		Revision as of 12:01, 1 July 2016
Line 32:		Line 32:

	==616.12.1 WORK ZONE FINE Sign (CONST-3A)==		==616.12.1 WORK ZONE FINE Sign (CONST-3A)==
			{\|style="padding: 0.3em; margin-left:10px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="350px" align="right"
			\|-
			\|'''Additional Info<br/>About Signs Required for Assessing Fines<br/> [http://www.moga.mo.gov/mostatutes/stathtml/30400005821.HTML RSMo 304.582.1]
			\|}
	The WORK ZONE FINE sign shall be specified on projects where all the following criteria are met:		The WORK ZONE FINE sign shall be specified on projects where all the following criteria are met:
	:* Duration of the work zone is longer than 4 hours.		:* Duration of the work zone is longer than 4 hours.
Line 39:		Line 42:
	:* Workers will be present without positive protection (concrete barrier or guardrail).		:* Workers will be present without positive protection (concrete barrier or guardrail).

	If a lane closure is used on a roadway with two lanes in the direction of travel, two DO NOT PASS and two PASS WITH CARE signs and two CONST-3X, (SPEEDING/PASSING) plates shall be specified. WORK ZONE plaques shall be specified for all DO NOT PASS ~~and PASS WITH CARE~~ signs being used as part of the work zone signing sequence. If a lane closure is used on a roadway with three or more lanes in the direction of travel, the DO NOT PASS and PASS WITH CARE signs and SPEEDING/PASSING plates shall not be specified.		If a lane closure is used on a roadway with two lanes in the direction of travel, two DO NOT PASS and two PASS WITH CARE signs and two CONST-3X, (SPEEDING/PASSING) plates shall be specified. WORK ZONE plaques shall be specified for all DO NOT PASS signs being used as part of the work zone signing sequence. If a lane closure is used on a roadway with three or more lanes in the direction of travel, the DO NOT PASS and PASS WITH CARE signs and SPEEDING/PASSING plates shall not be specified.

	==616.12.2 Sign Descriptions and Applications==		==616.12.2 Sign Descriptions and Applications==

Smithk: /* 616.12.3 Work Zone SPEED LIMIT Figures */ Per TS, minor updates to the Work Zone Speed Limit figures. A new figure was added, Fig. 616.12.3.5 for lane closure

2016-05-03T13:30:47Z

616.12.3 Work Zone SPEED LIMIT Figures: Per TS, minor updates to the Work Zone Speed Limit figures. A new figure was added, Fig. 616.12.3.5 for lane closure

Show changes

Smithk: updated numbering system

2012-03-05T20:49:58Z

updated numbering system

Smithk: 616.29 Work Zone Speed Limits moved to 616.12 Work Zone Speed Limits: Per Traffic, revision to bring policy into substantial compliance with the 2009 MUTCD.

2012-03-05T20:45:13Z

616.29 Work Zone Speed Limits moved to 616.12 Work Zone Speed Limits: Per Traffic, revision to bring policy into substantial compliance with the 2009 MUTCD.

← Older revision	Revision as of 15:45, 5 March 2012
(No difference)

Smithk: /* 616.29.1 WORK ZONE FINE Sign (CONST-3A) */ Per Traffic, minor clarification

2011-04-15T15:50:34Z

616.29.1 WORK ZONE FINE Sign (CONST-3A): Per Traffic, minor clarification

← Older revision		Revision as of 10:50, 15 April 2011
Line 33:		Line 33:
	==616.29.1 WORK ZONE FINE Sign (CONST-3A)==		==616.29.1 WORK ZONE FINE Sign (CONST-3A)==

	The WORK ZONE FINE sign is specified on projects where all the following criteria are met:		The WORK ZONE FINE sign shall be specified on projects where all the following criteria are met:
	:* Duration of the work zone is longer than 4 hours.		:* Duration of the work zone is longer than 4 hours.
	:* Reduced speed limits are in effect.		:* Reduced speed limits are in effect.
Line 39:		Line 39:
	:* Workers will be present without positive protection (concrete barrier or guardrail).		:* Workers will be present without positive protection (concrete barrier or guardrail).

	If a lane closure is used on a roadway with two lanes in the direction of travel, two DO NOT PASS and two PASS WITH CARE signs and two CONST-3X, (SPEEDING/PASSING) plates ~~are to~~ be specified. WORK ZONE plaques ~~are to~~ be specified for all DO NOT PASS and PASS WITH CARE signs being used as part of the work zone signing sequence. If a lane closure is used on a roadway with three or more lanes in the direction of travel, the DO NOT PASS and PASS WITH CARE signs and SPEEDING/PASSING plates ~~are~~ not to be specified.		If a lane closure is used on a roadway with two lanes in the direction of travel, two DO NOT PASS and two PASS WITH CARE signs and two CONST-3X, (SPEEDING/PASSING) plates shall be specified. WORK ZONE plaques shall be specified for all DO NOT PASS and PASS WITH CARE signs being used as part of the work zone signing sequence. If a lane closure is used on a roadway with three or more lanes in the direction of travel, the DO NOT PASS and PASS WITH CARE signs and SPEEDING/PASSING plates shall not be specified.

	==616.29.2 Sign Descriptions and Applications==		==616.29.2 Sign Descriptions and Applications==

← Older revision		Revision as of 15:49, 5 March 2012
Line 4:		Line 4:

	Should a reduced speed limit be deemed appropriate, the following table shows the recommended maximum speed reductions that may be imposed in temporary traffic control zones.		Should a reduced speed limit be deemed appropriate, the following table shows the recommended maximum speed reductions that may be imposed in temporary traffic control zones.
	===<center>Table 616.29 Recommended Maximum Speed Reductions</center>===		===<center>Table 616.12 Recommended Maximum Speed Reductions</center>===
	{\| border="1" class="wikitable" style="margin: 1em auto 1em auto"		{\| border="1" class="wikitable" style="margin: 1em auto 1em auto"
	\|+		\|+
Line 28:		Line 28:
	:* Posted work zone speed limit shall not be below 35 mph, except when local ordinance provides for a lower speed. The lower speed shall be used when applicable.		:* Posted work zone speed limit shall not be below 35 mph, except when local ordinance provides for a lower speed. The lower speed shall be used when applicable.
	:* Appropriate warning signs with advisory speed plaques should be used to advise of any specialized situations (i.e., temporary bypass, narrow lanes, etc.).		:* Appropriate warning signs with advisory speed plaques should be used to advise of any specialized situations (i.e., temporary bypass, narrow lanes, etc.).
	:* For approved speed reductions greater than 10 mph, additional notification should be provided through the use of the SPEED LIMIT XX AHEAD sign. Refer to [[#616.29.3 Work Zone SPEED LIMIT Figures\|EPG 616.29.3 Work Zone SPEED LIMIT Figures]].		:* For approved speed reductions greater than 10 mph, additional notification should be provided through the use of the SPEED LIMIT XX AHEAD sign. Refer to [[#616.12.3 Work Zone SPEED LIMIT Figures\|EPG 616.12.3 Work Zone SPEED LIMIT Figures]].
	:* For approved speed reductions greater than 20 mph, the speed limit should be reduced in two stages. Refer to [[#616.29.3 Work Zone SPEED LIMIT Figures\|EPG 616.29.3 Work Zone SPEED LIMIT Figures]].		:* For approved speed reductions greater than 20 mph, the speed limit should be reduced in two stages. Refer to [[#616.12.3 Work Zone SPEED LIMIT Figures\|EPG 616.12.3 Work Zone SPEED LIMIT Figures]].

	==616.29.1 WORK ZONE FINE Sign (CONST-3A)==		==616.12.1 WORK ZONE FINE Sign (CONST-3A)==

	The WORK ZONE FINE sign shall be specified on projects where all the following criteria are met:		The WORK ZONE FINE sign shall be specified on projects where all the following criteria are met:
Line 41:		Line 41:
	If a lane closure is used on a roadway with two lanes in the direction of travel, two DO NOT PASS and two PASS WITH CARE signs and two CONST-3X, (SPEEDING/PASSING) plates shall be specified. WORK ZONE plaques shall be specified for all DO NOT PASS and PASS WITH CARE signs being used as part of the work zone signing sequence. If a lane closure is used on a roadway with three or more lanes in the direction of travel, the DO NOT PASS and PASS WITH CARE signs and SPEEDING/PASSING plates shall not be specified.		If a lane closure is used on a roadway with two lanes in the direction of travel, two DO NOT PASS and two PASS WITH CARE signs and two CONST-3X, (SPEEDING/PASSING) plates shall be specified. WORK ZONE plaques shall be specified for all DO NOT PASS and PASS WITH CARE signs being used as part of the work zone signing sequence. If a lane closure is used on a roadway with three or more lanes in the direction of travel, the DO NOT PASS and PASS WITH CARE signs and SPEEDING/PASSING plates shall not be specified.

	==616.29.2 Sign Descriptions and Applications==		==616.12.2 Sign Descriptions and Applications==

	Sign descriptions and applications are located in [[616.2 Work Zone Signing and Applications\|EPG 616.2 Work Zone Signing and Applications]].		Sign descriptions and applications are located in [[616.2 Work Zone Signing and Applications\|EPG 616.2 Work Zone Signing and Applications]].

	==616.29.3 Work Zone SPEED LIMIT Figures==		==616.12.3 Work Zone SPEED LIMIT Figures==
	{\|style="border:4px solid #ff9933; background:#f5f5f5" align="right"		{\|style="border:4px solid #ff9933; background:#f5f5f5" align="right"
	\|-		\|-
	\|[[media:616.29.3.1.pdf\|pdf. version of Fig. 616.29.3.1]]		\|[[media:616.29.3.1.pdf\|pdf. version of Fig. 616.12.3.1]]
	\|-		\|-
	\|}		\|}
	===Fig. 616.29.3.1 Work Zone SPEED LIMIT Locations within Advance Warning Area===		===Fig. 616.12.3.1 Work Zone SPEED LIMIT Locations within Advance Warning Area===
	====<center>''Table 616.29.3.1''</center>====		====<center>''Table 616.12.3.1''</center>====
	{\| border="1" class="wikitable" style="margin: 1em auto 1em auto" style="text-align:center"		{\| border="1" class="wikitable" style="margin: 1em auto 1em auto" style="text-align:center"
	\|+		\|+
Line 82:		Line 82:


	For speed limit guidance, refer to [[#Table 616.29 Recommended Speed Reductions\|EPG 616.29 Work Zone Speed Limits]].		For speed limit guidance, refer to [[#Table 616.12 Recommended Speed Reductions\|EPG 616.12 Work Zone Speed Limits]].

	This typical application may be appropriate for single location work, per example, bridge work, culvert repair, localized pavement repair.		This typical application may be appropriate for single location work, per example, bridge work, culvert repair, localized pavement repair.
Line 136:		Line 136:
	{\|style="border:4px solid #ff9933; background:#f5f5f5" align="right"		{\|style="border:4px solid #ff9933; background:#f5f5f5" align="right"
	\|-		\|-
	\|[[media:616.29.3.2.pdf\|pdf. version of Fig. 616.29.3.2]]		\|[[media:616.29.3.2.pdf\|pdf. version of Fig. 616.12.3.2]]
	\|-		\|-
	\|}		\|}

	===Fig. 616.29.3.2 Work Zone SPEED LIMIT Locations within Activity Area===		===Fig. 616.12.3.2 Work Zone SPEED LIMIT Locations within Activity Area===
	====<center>''Table 616.29.3.2''</center>====		====<center>''Table 616.12.3.2''</center>====
	{\| border="1" class="wikitable" style="margin: 1em auto 1em auto" style="text-align:center"		{\| border="1" class="wikitable" style="margin: 1em auto 1em auto" style="text-align:center"
	\|+		\|+
Line 171:		Line 171:


	For speed limit guidance, refer to [[#Table 616.29 Recommended Speed Reductions\|EPG 616.29 Work Zone Speed Limits]].		For speed limit guidance, refer to [[#Table 616.12 Recommended Speed Reductions\|EPG 616.12 Work Zone Speed Limits]].

	This typical application may be appropriate for moving operations when acitivities will		This typical application may be appropriate for moving operations when acitivities will
Line 179:		Line 179:

	(1) If used, the WO3-5 (SPEED LIMIT XX AHEAD) sign shall be located in the Advance Warning Area.		(1) If used, the WO3-5 (SPEED LIMIT XX AHEAD) sign shall be located in the Advance Warning Area.
	This sign is used only when the approved speed reduction for an immediate location is greater than 10 mph below the existing or posted speed limit. For sign placement, refer to [[#Fig. 616.29.3.1 Work Zone SPEED LIMIT Locations within Advance Warning Area\|		This sign is used only when the approved speed reduction for an immediate location is greater than 10 mph below the existing or posted speed limit. For sign placement, refer to [[#Fig. 616.12.3.1 Work Zone SPEED LIMIT Locations within Advance Warning Area\|EPG 616.12.3.1 Work Zone SPEED LIMIT Locations Within Advance Warning Area]].
	EPG 616.29.3.1 Work Zone SPEED LIMIT Locations Within Advance Warning Area]].

	(2) The SPEED LIMIT signs should be located at the farthest upstream activity with		(2) The SPEED LIMIT signs should be located at the farthest upstream activity with
Line 212:		Line 211:
	{\|style="border:4px solid #ff9933; background:#f5f5f5" align="right"		{\|style="border:4px solid #ff9933; background:#f5f5f5" align="right"
	\|-		\|-
	\|[[media:616.29.3.3.pdf\|pdf. version of Fig. 616.29.3.3]]		\|[[media:616.29.3.3.pdf\|pdf. version of Fig. 616.12.3.3]]
	\|-		\|-
	\|}		\|}

	===Fig. 616.29.3.3 Work Zone FINE Sign and SPEED LIMIT Locations within Advance Warning Area===		===Fig. 616.12.3.3 Work Zone FINE Sign and SPEED LIMIT Locations within Advance Warning Area===

	====<center>''Table 616.29.3.3''</center>====		====<center>''Table 616.12.3.3''</center>====
	{\| border="1" class="wikitable" style="margin: 1em auto 1em auto" style="text-align:center"		{\| border="1" class="wikitable" style="margin: 1em auto 1em auto" style="text-align:center"
	\|+		\|+
Line 250:		Line 249:


	For speed limit guidance, refer to [[#Table 616.29 Recommended Speed Reductions\|EPG 616.29 Work Zone Speed Limits]].		For speed limit guidance, refer to [[#Table 616.12 Recommended Speed Reductions\|EPG 616.12 Work Zone Speed Limits]].

	This typical application may be appropriate for single location work, per example, bridge work, culvert repair, localized pavement repair.		This typical application may be appropriate for single location work, per example, bridge work, culvert repair, localized pavement repair.
Line 301:		Line 300:
	{\|style="border:4px solid #ff9933; background:#f5f5f5" align="right"		{\|style="border:4px solid #ff9933; background:#f5f5f5" align="right"
	\|-		\|-
	\|[[media:616.29.3.4.pdf\|pdf. version of Fig. 616.29.3.4]]		\|[[media:616.29.3.4.pdf\|pdf. version of Fig. 616.12.3.4]]
	\|-		\|-
	\|}		\|}

	===Fig. 616.29.3.4 Work Zone SPEED LIMIT Locations for Reductions Greater than 20 mph and Reduction in Two Locations===		===Fig. 616.12.3.4 Work Zone SPEED LIMIT Locations for Reductions Greater than 20 mph and Reduction in Two Locations===

	[[Image:628.3.4.jpg\|center\|790px]]		[[Image:628.3.4.jpg\|center\|790px]]
Line 311:		Line 310:
	For undivided roadways, provide signs only on the right side of each direction.		For undivided roadways, provide signs only on the right side of each direction.

	For proper speed limit sign spacing, reference typical applications [[#Fig. 616.29.3.1 Work Zone SPEED LIMIT Locations within Advance Warning Area\|EPG 616.29.3.1 Work Zone Speed Limit Locations within Advance Warning Area]] or [[#Fig. 616.29.3.2 Work Zone SPEED LIMIT Locations within Activity Area\|EPG 616.29.3.2 Work Zone Speed Limit Locations within Activity Area]].		For proper speed limit sign spacing, reference typical applications [[#Fig. 616.12.3.1 Work Zone SPEED LIMIT Locations within Advance Warning Area\|EPG 616.12.3.1 Work Zone Speed Limit Locations within Advance Warning Area]] or [[#Fig. 616.12.3.2 Work Zone SPEED LIMIT Locations within Activity Area\|EPG 616.12.3.2 Work Zone Speed Limit Locations within Activity Area]].



	[[Category:616 Temporary Traffic Control]]		[[Category:616 Temporary Traffic Control]]