Category:1004 Graded Aggregate for Bituminous Surface - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-01T17:33:06Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 12:33, 1 October 2021
Line 22:		Line 22:
	===1004.4.1 Types of Samples Tested===		===1004.4.1 Types of Samples Tested===
	====1004.4.1.1 Initial Approval Sample====		====1004.4.1.1 Initial Approval Sample====
	Tests consist of specific gravity, absorption, and Los Angeles abrasion. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through SM.		Tests consist of specific gravity, absorption, and Los Angeles abrasion. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through AWP.

	====1004.4.1.2 Source Approval Sample====		====1004.4.1.2 Source Approval Sample====
	Tests consist of sieve analysis, specific gravity, absorption, Los Angeles abrasion, and deleterious content. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through SM.		Tests consist of sieve analysis, specific gravity, absorption, Los Angeles abrasion, and deleterious content. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through AWP.

	====1004.4.1.3 Trial Mix Samples====		====1004.4.1.3 Trial Mix Samples====
	Coarse aggregate tests for trial mix consist of sieve analysis, specific gravity, absorption, plastic index (when required), deleterious content, sand equivalency (T176), and uncompacted voids (T304). The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through SM.		Coarse aggregate tests for trial mix consist of sieve analysis, specific gravity, absorption, plastic index (when required), deleterious content, sand equivalency (T176), and uncompacted voids (T304). The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through AWP.

	Fine aggregate tests for trial mix consist of sieve analysis, specific gravity, plastic index (when required), other deleterious substances, clay lumps and shale, and lightweight particle content when specified. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through SM.		Fine aggregate tests for trial mix consist of sieve analysis, specific gravity, plastic index (when required), other deleterious substances, clay lumps and shale, and lightweight particle content when specified. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through AWP.

	===1004.4.2 Procedure===		===1004.4.2 Procedure===

Smithk: /* 1004.4.3 Sample Record */ Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-09-16T12:42:49Z

1004.4.3 Sample Record: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 07:42, 16 September 2021
Line 49:		Line 49:

	===1004.4.3 Sample Record===		===1004.4.3 Sample Record===
	The sample record shall be completed in [~~http~~:~~//wwwi/intranet/cm/siteManager.htm SM]~~, ~~as described in~~ Sample Record General ~~Information[[image:bulldozer.jpg\|20px~~]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in Reporting Test Results, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in AASHTOWARE Project (AWP) in accordance with [[:Category:101 Standard Forms #Sample Record, General\|AWP MA Sample Record, General]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in Reporting Test Results, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1004.3 Records and Reports */ Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-09-16T12:39:23Z

1004.3 Records and Reports: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 07:39, 16 September 2021
Line 17:		Line 17:

	==1004.3 Records and Reports==		==1004.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|EPG 1001.6 General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through ~~[http://wwwi/intranet/cm/siteManager.htm SiteManager~~ (SM)] in accordance with [[:Category:101 Standard Forms#Sample Record General ~~Information~~\|Sample Record General ~~Information]][[image:bulldozer.jpg\|20px~~]].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|EPG 1001.6 General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through AASHTOWARE Project (AWP) in accordance with [[:Category:101 Standard Forms #Sample Record, General\|AWP MA Sample Record, General]].

	==1004.4 Laboratory Procedures for Sec 1004==		==1004.4 Laboratory Procedures for Sec 1004==

Smithk: updated link

2018-10-11T20:02:32Z

updated link

← Older revision		Revision as of 15:02, 11 October 2018
Line 3:		Line 3:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

Smithk: updated links

2016-06-15T15:48:04Z

updated links

← Older revision		Revision as of 10:48, 15 June 2016
Line 14:		Line 14:

	==1004.2 Acceptance==		==1004.2 Acceptance==
	Acceptance is based on routine tests in the field to ensure compliance with [http://modot.~~mo.gov~~/business/standards_and_specs/~~Sec1004~~.pdf Sec 1004]. Samples are to be taken at destination or at the source of aggregate production by MoDOT inspectors at intervals of one per 1,500 tons.		Acceptance is based on routine tests in the field to ensure compliance with [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1004]. Samples are to be taken at destination or at the source of aggregate production by MoDOT inspectors at intervals of one per 1,500 tons.

	==1004.3 Records and Reports==		==1004.3 Records and Reports==

Smithk: /* 1004.1 Procedure */ Per CM, the ITP gives sampling requirements and excel to oracle sheets for reporting material. Thus the Required Field Test tables were removed

2015-03-26T13:04:58Z

1004.1 Procedure: Per CM, the ITP gives sampling requirements and excel to oracle sheets for reporting material. Thus the Required Field Test tables were removed

@@ Line 12: / Line 12: @@
 ==1004.1 Procedure==
 Inspection, testing, and sampling will be governed by the instructions contained in [[:Category:1001 General Requirements for Material|EPG 1001 General Requirements for Material]].
 ==1004.2 Acceptance==

Smithk: /* 1004.3 Records and Reports */

2013-08-22T13:32:30Z

1004.3 Records and Reports

← Older revision		Revision as of 08:32, 22 August 2013
Line 30:		Line 30:

	==1004.3 Records and Reports==		==1004.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [[:Category:101 Standard Forms#Sample Record General Information\|Sample Record General Information]][[image:bulldozer.jpg\|20px]].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|EPG 1001.6 General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [[:Category:101 Standard Forms#Sample Record General Information\|Sample Record General Information]][[image:bulldozer.jpg\|20px]].

	==1004.4 Laboratory Procedures for Sec 1004==		==1004.4 Laboratory Procedures for Sec 1004==

Smithk: /* 1004.1 Procedure */

2013-08-22T13:31:54Z

1004.1 Procedure

← Older revision		Revision as of 08:31, 22 August 2013
Line 11:		Line 11:

	==1004.1 Procedure==		==1004.1 Procedure==
	Inspection, testing, and sampling will be governed by the instructions contained in [[:Category:1001 General Requirements for Material\|General Requirements for Material]].		Inspection, testing, and sampling will be governed by the instructions contained in [[:Category:1001 General Requirements for Material\|EPG 1001 General Requirements for Material]].

	Field tests required are as follows:		Field tests required are as follows:

Smithk: updated link

2013-08-22T13:31:22Z

updated link

← Older revision		Revision as of 08:31, 22 August 2013
Line 30:		Line 30:

	==1004.3 Records and Reports==		==1004.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [~~http~~:~~//contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510~~.~~pdf Automation Section 3510~~].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [[:Category:101 Standard Forms#Sample Record General Information\|Sample Record General Information]][[image:bulldozer.jpg\|20px]].

	==1004.4 Laboratory Procedures for Sec 1004==		==1004.4 Laboratory Procedures for Sec 1004==
Line 62:		Line 62:

	===1004.4.3 Sample Record===		===1004.4.3 Sample Record===
	The sample record shall be completed in [http://wwwi/intranet/cm/siteManager.htm SM], as described in ~~Automation Section 3510~~, and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in Reporting Test Results, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in [http://wwwi/intranet/cm/siteManager.htm SM], as described in Sample Record General Information[[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in Reporting Test Results, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: updated link

2013-02-14T19:48:41Z

updated link

← Older revision		Revision as of 14:48, 14 February 2013
Line 30:		Line 30:

	==1004.3 Records and Reports==		==1004.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.5 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The aggregates shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510].

	==1004.4 Laboratory Procedures for Sec 1004==		==1004.4 Laboratory Procedures for Sec 1004==