Category:1045 Paint for Structural Steel - Revision history

Hoskir: removed link to high solids inorganic paint they do not have an approved list yet

2025-07-17T20:20:46Z

removed link to high solids inorganic paint they do not have an approved list yet

← Older revision		Revision as of 15:20, 17 July 2025
Line 27:		Line 27:
	\|[https://www.modot.org/media/511 Qualified Polysiloxane Paints]		\|[https://www.modot.org/media/511 Qualified Polysiloxane Paints]
	\|-		\|-
	\|~~[https://www.modot.org/media/511~~ Qualified High Solids Inorganic Ethyl Silicate Paints]		\|Qualified High Solids Inorganic Ethyl Silicate Paints
	\|-		\|-
	\|'''MGS Information'''		\|'''MGS Information'''

Hoskir: updated per RR4071

2025-07-14T17:11:48Z

updated per RR4071

← Older revision		Revision as of 12:11, 14 July 2025
Line 5:		Line 5:
	Discussions on [[1045.4 Non-Standard Colors of Structural Steel Paint\|non-standard colors of structural steel paint]] and [[1045.5 Policy on Color of Structural Steel Paint\|color of structural steel paint]] policies are available.		Discussions on [[1045.4 Non-Standard Colors of Structural Steel Paint\|non-standard colors of structural steel paint]] and [[1045.5 Policy on Color of Structural Steel Paint\|color of structural steel paint]] policies are available.

	For Laboratory testing and sample reporting procedures, refer to [[1045.6 Laboratory Testing Guidelines for Sec 1045\|EPG 1045.6 Laboratory Testing Guidelines for Sec 1045]].		For Laboratory testing and sample reporting procedures, refer to [[1045.6 Laboratory Testing Guidelines for Sec 1045\|EPG 1045.6 Laboratory Testing Guidelines for Sec 1045]].



	==1045.1 Apparatus==		==1045.1 Apparatus==
Line 28:		Line 26:
	\|-		\|-
	\|[https://www.modot.org/media/511 Qualified Polysiloxane Paints]		\|[https://www.modot.org/media/511 Qualified Polysiloxane Paints]
			\|-
			\|[https://www.modot.org/media/511 Qualified High Solids Inorganic Ethyl Silicate Paints]
	\|-		\|-
	\|'''MGS Information'''		\|'''MGS Information'''
Line 101:		Line 101:
	===1045.2.11 Organic Zinc-Rich Coating===		===1045.2.11 Organic Zinc-Rich Coating===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as Qualified Organic Zinc Paints. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of organic vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through AWP, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as Qualified Organic Zinc Paints. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of organic vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through AWP, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.

			===1045.2.12 High Solids Inorganic Ethyl Silicate Coating===
			Refer to the applicable requirements of Sec 1045 for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as Qualified High Solids Inorganic Ethyl Silicate Paints. Sample each batch or lot submitted for use. A sample consists of one pint (500 mL) in a friction top can. Submit the sample to the Laboratory through an AWP record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.

	==1045.3 Acceptance==		==1045.3 Acceptance==

	Confirm that the paint is on the current approved list and that the paint is within its shelf life. Obtain a certification specific to the batch of paint, with lot or batch numbers, date of manufacture and quantity represented by the certification. Confirm that the lot or batch of paint has been sampled and approved by the Laboratory. If not, sample the paint and submit it for approval prior to use.		Confirm that the paint is on the current approved list and that the paint is within its shelf life. Obtain a certification specific to the batch of paint, with lot or batch numbers, date of manufacture and quantity represented by the certification. Confirm that the lot or batch of paint has been sampled and approved by the Laboratory. If not, sample the paint and submit it for approval prior to use.

	==1045.4 Sample Record==		==1045.4 Sample Record==
	The Laboratory will issue the reports for samples submitted to the Laboratory. Sample records indicating acceptance for project use will typically state “Prior Approval or Acceptance”, and will include the information provided in the certification, and where the certification is filed.		The Laboratory will issue the reports for samples submitted to the Laboratory. Sample records indicating acceptance for project use will typically state “Prior Approval or Acceptance”, and will include the information provided in the certification, and where the certification is filed.

Hoskir: updated per RR 3607

2022-12-21T20:34:03Z

updated per RR 3607

← Older revision		Revision as of 15:34, 21 December 2022
Line 25:		Line 25:
	\|[https://www.modot.org/media/509 Qualified Gray Epoxy-Mastic Primer]		\|[https://www.modot.org/media/509 Qualified Gray Epoxy-Mastic Primer]
	\|-		\|-
	\|[https://www.modot.org/media/510 Qualified ~~Calcium Sulfonate Overcoat Systems~~]		\|[https://www.modot.org/media/510 Qualified Organic Zinc Paints]
	\|-		\|-
	\|[https://www.modot.org/media/511 Qualified Polysiloxane Paints]		\|[https://www.modot.org/media/511 Qualified Polysiloxane Paints]

Hoskir: /* 1045.2.11 Calcium Sulfonate */ updated per RR 3607

2022-12-20T18:30:06Z

1045.2.11 Calcium Sulfonate: updated per RR 3607

← Older revision		Revision as of 13:30, 20 December 2022
Line 99:		Line 99:
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Gray epoxy mastic primer may be used in lieu of aluminum epoxy mastic. The list of paints that have been qualified by manufacturer and brand name are listed in Sec 1045. Each batch or lot submitted for use shall be sampled. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through an AWP record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.		Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Gray epoxy mastic primer may be used in lieu of aluminum epoxy mastic. The list of paints that have been qualified by manufacturer and brand name are listed in Sec 1045. Each batch or lot submitted for use shall be sampled. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through an AWP record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.

	===1045.2.11 ~~Calcium Sulfonate~~===		===1045.2.11 Organic Zinc-Rich Coating===
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as ~~[https://www.modot.org/media/510~~ Qualified ~~Calcium Sulfonate Overcoat Systems]~~. Sample each batch or lot of ~~penetrating sealer, primer or finish coat~~. A sample consists of one ~~quart~~ (~~1 L~~) in ~~a friction top can~~. Submit the ~~sample~~ to the Laboratory through an AWP ~~record~~, including the brand name, the batch or lot number, and the weight (mass) shown on each ~~container~~.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as Qualified Organic Zinc Paints. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of organic vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through AWP, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.

	==1045.3 Acceptance==		==1045.3 Acceptance==

Smithk: /* 1045.2.4 Submission of Samples */ Per CM, replaced archaic "Automation Section" with AWP MA Sample Record, General

2021-11-24T15:24:27Z

1045.2.4 Submission of Samples: Per CM, replaced archaic "Automation Section" with AWP MA Sample Record, General

← Older revision		Revision as of 10:24, 24 November 2021
Line 76:		Line 76:

	===1045.2.4 Submission of Samples===		===1045.2.4 Submission of Samples===
	Paint and some paint constituents require special handling. See [[106.3 Samples, Tests and Cited Specifications#106.3.1.2.2 Transportation of Samples\|EPG 106.3.1.2.2 Transportation of Samples]] and [[106.3 Samples, Tests and Cited Specifications#106.3.1.3 Sampling Supplies\|EPG 106.3.1.3 Sampling Supplies]] for packaging, labeling and marking instructions. Enter a Basic Sample Data report into AASHTOWARE Project (AWP) (see [~~http~~://~~contribute~~.modot.~~mo.gov/business/materials~~/~~pdf~~/~~vol_3~~/~~MMV3CONT~~.~~pdf Automation Section~~]) for each sample of material submitted to the Laboratory. Include all pertinent information necessary to the sample, such as: kind of paint or constituent, batch or lot number, project number, purchase order or "general construction" for warehouse stock, inspector, source, quantity, intended use, contractor, destination, manufacturer's name and address.		Paint and some paint constituents require special handling. See [[106.3 Samples, Tests and Cited Specifications#106.3.1.2.2 Transportation of Samples\|EPG 106.3.1.2.2 Transportation of Samples]] and [[106.3 Samples, Tests and Cited Specifications#106.3.1.3 Sampling Supplies\|EPG 106.3.1.3 Sampling Supplies]] for packaging, labeling and marking instructions. Enter a Basic Sample Data report into AASHTOWARE Project (AWP) (see [https://epg.modot.org/forms/CM/AWP_MA_Sample_Record_General.docx AWP MA Sample Record, General]) for each sample of material submitted to the Laboratory. Include all pertinent information necessary to the sample, such as: kind of paint or constituent, batch or lot number, project number, purchase order or "general construction" for warehouse stock, inspector, source, quantity, intended use, contractor, destination, manufacturer's name and address.

	===1045.2.5 High Solids Inorganic Zinc Silicate Coating===		===1045.2.5 High Solids Inorganic Zinc Silicate Coating===

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-01T18:51:36Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

Smithk: updated several links to pre-qualified lists

2019-04-12T15:57:08Z

updated several links to pre-qualified lists

Smithk: Per Materials, updated numerous links for the Approved and Pre-qualified list

2019-01-24T16:11:10Z

Per Materials, updated numerous links for the Approved and Pre-qualified list

Smithk: updated link

2018-10-15T13:04:57Z

updated link

← Older revision		Revision as of 08:04, 15 October 2018
Line 31:		Line 31:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

EPGsysop: /* 1045.2.6 Polyurethane System G Final Coating */

2017-04-07T18:55:29Z

1045.2.6 Polyurethane System G Final Coating

← Older revision		Revision as of 13:55, 7 April 2017
Line 83:		Line 83:

	===1045.2.6 Polyurethane System G Final Coating===		===1045.2.6 Polyurethane System G Final Coating===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [http://www.modot.mo.gov/business/materials/pdf/vol_1/FS1045T7.pdf Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of each component in the approximate volume proportions recommended by the manufacturer ~~such~~ that the mixed sample will consist of at least one quart (1 L). Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [http://www.modot.mo.gov/business/materials/pdf/vol_1/FS1045T7.pdf Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of each component in the approximate volume proportions recommended by the manufacturer so that the mixed sample will consist of at least one quart (1 L). Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.

	===1045.2.7 High Solids Epoxy Intermediate Coat===		===1045.2.7 High Solids Epoxy Intermediate Coat===

← Older revision		Revision as of 13:51, 1 October 2021
Line 76:		Line 76:

	===1045.2.4 Submission of Samples===		===1045.2.4 Submission of Samples===
	Paint and some paint constituents require special handling. See [[106.3 Samples, Tests and Cited Specifications#106.3.1.2.2 Transportation of Samples\|EPG 106.3.1.2.2 Transportation of Samples]] and [[106.3 Samples, Tests and Cited Specifications#106.3.1.3 Sampling Supplies\|EPG 106.3.1.3 Sampling Supplies]] for packaging, labeling and marking instructions. Enter a Basic Sample Data report into ~~SiteManager~~ (see [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/MMV3CONT.pdf Automation Section]) for each sample of material submitted to the Laboratory. Include all pertinent information necessary to the sample, such as: kind of paint or constituent, batch or lot number, project number, purchase order or "general construction" for warehouse stock, inspector, source, quantity, intended use, contractor, destination, manufacturer's name and address.		Paint and some paint constituents require special handling. See [[106.3 Samples, Tests and Cited Specifications#106.3.1.2.2 Transportation of Samples\|EPG 106.3.1.2.2 Transportation of Samples]] and [[106.3 Samples, Tests and Cited Specifications#106.3.1.3 Sampling Supplies\|EPG 106.3.1.3 Sampling Supplies]] for packaging, labeling and marking instructions. Enter a Basic Sample Data report into AASHTOWARE Project (AWP) (see [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/MMV3CONT.pdf Automation Section]) for each sample of material submitted to the Laboratory. Include all pertinent information necessary to the sample, such as: kind of paint or constituent, batch or lot number, project number, purchase order or "general construction" for warehouse stock, inspector, source, quantity, intended use, contractor, destination, manufacturer's name and address.

	===1045.2.5 High Solids Inorganic Zinc Silicate Coating===		===1045.2.5 High Solids Inorganic Zinc Silicate Coating===
	[[image:1045.2.5.jpg\|right\|325px\|thumb\|<center>'''Field inspection of existing bridge coatings'''</center>]]		[[image:1045.2.5.jpg\|right\|325px\|thumb\|<center>'''Field inspection of existing bridge coatings'''</center>]]
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/506 Qualified High Solids Inorganic Zinc Silicate Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of inorganic silicate vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through ~~a SiteManager record~~, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/506 Qualified High Solids Inorganic Zinc Silicate Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of inorganic silicate vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through AWP, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.

	===1045.2.6 Polyurethane System G Final Coating===		===1045.2.6 Polyurethane System G Final Coating===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/507 Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of each component in the approximate volume proportions recommended by the manufacturer so that the mixed sample will consist of at least one quart (1 L). Submit the samples to the Laboratory through ~~a SiteManager~~ record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/507 Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of each component in the approximate volume proportions recommended by the manufacturer so that the mixed sample will consist of at least one quart (1 L). Submit the samples to the Laboratory through an AWP record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.

	===1045.2.7 High Solids Epoxy Intermediate Coat===		===1045.2.7 High Solids Epoxy Intermediate Coat===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/507 Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of each component. Submit the samples to the Laboratory using ~~a SiteManager~~ record, including the brand name, batch or lot number of each component, and the net weight (mass) as shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/507 Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of each component. Submit the samples to the Laboratory using an AWP record, including the brand name, batch or lot number of each component, and the net weight (mass) as shown on the container of each component.

	===1045.2.8 Waterborne Acrylic System H Intermediate and Finish Coating===		===1045.2.8 Waterborne Acrylic System H Intermediate and Finish Coating===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as
	[https://www.modot.org/media/508 Qualified Waterborne Acrylic Paints]. Sample each batch or lot of each intermediate or finish coat.		[https://www.modot.org/media/508 Qualified Waterborne Acrylic Paints]. Sample each batch or lot of each intermediate or finish coat.
	A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through ~~a SiteManager~~ record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container.		A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through an AWP record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container.

	===1045.2.9 Aluminum Epoxy Mastic Primer===		===1045.2.9 Aluminum Epoxy Mastic Primer===
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Aluminum epoxy mastic primer is not suitable for use in contact with freshly poured concrete. Brands that have been qualified are listed in [https://www.modot.org/media/505 Qualified Aluminum Epoxy Mastic Paint]. Sample each batch or lot submitted for use. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through ~~a SiteManager~~ record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.		Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Aluminum epoxy mastic primer is not suitable for use in contact with freshly poured concrete. Brands that have been qualified are listed in [https://www.modot.org/media/505 Qualified Aluminum Epoxy Mastic Paint]. Sample each batch or lot submitted for use. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through an AWP record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.

	===1045.2.10 Gray Epoxy Mastic Primer===		===1045.2.10 Gray Epoxy Mastic Primer===
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Gray epoxy mastic primer may be used in lieu of aluminum epoxy mastic. The list of paints that have been qualified by manufacturer and brand name are listed in Sec 1045. Each batch or lot submitted for use shall be sampled. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through ~~a SiteManager~~ record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.		Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Gray epoxy mastic primer may be used in lieu of aluminum epoxy mastic. The list of paints that have been qualified by manufacturer and brand name are listed in Sec 1045. Each batch or lot submitted for use shall be sampled. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through an AWP record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.

	===1045.2.11 Calcium Sulfonate===		===1045.2.11 Calcium Sulfonate===
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/510 Qualified Calcium Sulfonate Overcoat Systems]. Sample each batch or lot of penetrating sealer, primer or finish coat. A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through ~~a SiteManager~~ record, including the brand name, the batch or lot number, and the weight (mass) shown on each container.		Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/510 Qualified Calcium Sulfonate Overcoat Systems]. Sample each batch or lot of penetrating sealer, primer or finish coat. A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through an AWP record, including the brand name, the batch or lot number, and the weight (mass) shown on each container.

	==1045.3 Acceptance==		==1045.3 Acceptance==

← Older revision		Revision as of 10:57, 12 April 2019
Line 15:		Line 15:
	\|'''Approved and Pre-Qualified List'''		\|'''Approved and Pre-Qualified List'''
	\|-		\|-
	\|[https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t5.pdf~~ Qualified Aluminum Epoxy Mastic Paint]		\|[https://www.modot.org/media/505 Qualified Aluminum Epoxy Mastic Paint]
	\|-		\|-
	\|[https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t6.pdf~~ Qualified High Solids Inorganic Zinc Silicate Paints]		\|[https://www.modot.org/media/506 Qualified High Solids Inorganic Zinc Silicate Paints]
	\|-		\|-
	\|[https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t7.pdf~~ Qualified Epoxy\Polyurethane Paints]		\|[https://www.modot.org/media/507 Qualified Epoxy\Polyurethane Paints]
	\|-		\|-
	\|[https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t8.pdf~~ Qualified Waterborne Acrylic Paints]		\|[https://www.modot.org/media/508 Qualified Waterborne Acrylic Paints]
	\|-		\|-
	\|[https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t9.pdf~~ Qualified Gray Epoxy-Mastic Primer]		\|[https://www.modot.org/media/509 Qualified Gray Epoxy-Mastic Primer]
	\|-		\|-
	\|[https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t10.pdf~~ Qualified Calcium Sulfonate Overcoat Systems]		\|[https://www.modot.org/media/510 Qualified Calcium Sulfonate Overcoat Systems]
	\|-		\|-
	\|[https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t11.pdf~~ Qualified Polysiloxane Paints]		\|[https://www.modot.org/media/511 Qualified Polysiloxane Paints]
	\|-		\|-
	\|'''MGS Information'''		\|'''MGS Information'''
Line 80:		Line 80:
	===1045.2.5 High Solids Inorganic Zinc Silicate Coating===		===1045.2.5 High Solids Inorganic Zinc Silicate Coating===
	[[image:1045.2.5.jpg\|right\|325px\|thumb\|<center>'''Field inspection of existing bridge coatings'''</center>]]		[[image:1045.2.5.jpg\|right\|325px\|thumb\|<center>'''Field inspection of existing bridge coatings'''</center>]]
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t6.pdf~~ Qualified High Solids Inorganic Zinc Silicate Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of inorganic silicate vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/506 Qualified High Solids Inorganic Zinc Silicate Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of inorganic silicate vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.

	===1045.2.6 Polyurethane System G Final Coating===		===1045.2.6 Polyurethane System G Final Coating===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t7.pdf~~ Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of each component in the approximate volume proportions recommended by the manufacturer so that the mixed sample will consist of at least one quart (1 L). Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/507 Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of each component in the approximate volume proportions recommended by the manufacturer so that the mixed sample will consist of at least one quart (1 L). Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.

	===1045.2.7 High Solids Epoxy Intermediate Coat===		===1045.2.7 High Solids Epoxy Intermediate Coat===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t7.pdf~~ Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of each component. Submit the samples to the Laboratory using a SiteManager record, including the brand name, batch or lot number of each component, and the net weight (mass) as shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/507 Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of each component. Submit the samples to the Laboratory using a SiteManager record, including the brand name, batch or lot number of each component, and the net weight (mass) as shown on the container of each component.

	===1045.2.8 Waterborne Acrylic System H Intermediate and Finish Coating===		===1045.2.8 Waterborne Acrylic System H Intermediate and Finish Coating===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as
	[https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t8.pdf~~ Qualified Waterborne Acrylic Paints]. Sample each batch or lot of each intermediate or finish coat.		[https://www.modot.org/media/508 Qualified Waterborne Acrylic Paints]. Sample each batch or lot of each intermediate or finish coat.
	A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container.		A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container.

	===1045.2.9 Aluminum Epoxy Mastic Primer===		===1045.2.9 Aluminum Epoxy Mastic Primer===
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Aluminum epoxy mastic primer is not suitable for use in contact with freshly poured concrete. Brands that have been qualified are listed in [https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t5.pdf~~ Qualified Aluminum Epoxy Mastic Paint]. Sample each batch or lot submitted for use. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through a SiteManager record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.		Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Aluminum epoxy mastic primer is not suitable for use in contact with freshly poured concrete. Brands that have been qualified are listed in [https://www.modot.org/media/505 Qualified Aluminum Epoxy Mastic Paint]. Sample each batch or lot submitted for use. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through a SiteManager record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.

	===1045.2.10 Gray Epoxy Mastic Primer===		===1045.2.10 Gray Epoxy Mastic Primer===
Line 100:		Line 100:

	===1045.2.11 Calcium Sulfonate===		===1045.2.11 Calcium Sulfonate===
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/~~sites~~/~~default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t10.pdf~~ Qualified Calcium Sulfonate Overcoat Systems]. Sample each batch or lot of penetrating sealer, primer or finish coat. A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through a SiteManager record, including the brand name, the batch or lot number, and the weight (mass) shown on each container.		Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/media/510 Qualified Calcium Sulfonate Overcoat Systems]. Sample each batch or lot of penetrating sealer, primer or finish coat. A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through a SiteManager record, including the brand name, the batch or lot number, and the weight (mass) shown on each container.

	==1045.3 Acceptance==		==1045.3 Acceptance==

← Older revision		Revision as of 11:11, 24 January 2019
Line 15:		Line 15:
	\|'''Approved and Pre-Qualified List'''		\|'''Approved and Pre-Qualified List'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T5~~.pdf Qualified Aluminum Epoxy Mastic Paint]		\|[https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t5.pdf Qualified Aluminum Epoxy Mastic Paint]
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T6~~.pdf Qualified High Solids Inorganic Zinc Silicate Paints]		\|[https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t6.pdf Qualified High Solids Inorganic Zinc Silicate Paints]
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T7~~.pdf Qualified Epoxy\Polyurethane Paints]		\|[https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t7.pdf Qualified Epoxy\Polyurethane Paints]
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T8~~.pdf Qualified Waterborne Acrylic Paints]		\|[https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t8.pdf Qualified Waterborne Acrylic Paints]
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T9~~.pdf Qualified Gray Epoxy-Mastic Primer]		\|[https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t9.pdf Qualified Gray Epoxy-Mastic Primer]
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T10~~.pdf Qualified Calcium Sulfonate Overcoat Systems]		\|[https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t10.pdf Qualified Calcium Sulfonate Overcoat Systems]
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T11~~.pdf Qualified Polysiloxane Paints]		\|[https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t11.pdf Qualified Polysiloxane Paints]
	\|-		\|-
	\|'''MGS Information'''		\|'''MGS Information'''
Line 80:		Line 80:
	===1045.2.5 High Solids Inorganic Zinc Silicate Coating===		===1045.2.5 High Solids Inorganic Zinc Silicate Coating===
	[[image:1045.2.5.jpg\|right\|325px\|thumb\|<center>'''Field inspection of existing bridge coatings'''</center>]]		[[image:1045.2.5.jpg\|right\|325px\|thumb\|<center>'''Field inspection of existing bridge coatings'''</center>]]
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T6~~.pdf Qualified High Solids Inorganic Zinc Silicate Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of inorganic silicate vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t6.pdf Qualified High Solids Inorganic Zinc Silicate Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of inorganic silicate vehicle, one pint (500 mL) of metallic zinc powder and four ounces (120 mL) of activator component. Note that the activator is not to be sampled in metal containers and will be required only when sampling 3-component, high-solids primer. Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component and the net weight (mass) shown on the container of each component.

	===1045.2.6 Polyurethane System G Final Coating===		===1045.2.6 Polyurethane System G Final Coating===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T7~~.pdf Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of each component in the approximate volume proportions recommended by the manufacturer so that the mixed sample will consist of at least one quart (1 L). Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t7.pdf Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of each component in the approximate volume proportions recommended by the manufacturer so that the mixed sample will consist of at least one quart (1 L). Submit the samples to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container of each component.

	===1045.2.7 High Solids Epoxy Intermediate Coat===		===1045.2.7 High Solids Epoxy Intermediate Coat===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T7~~.pdf Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of each component. Submit the samples to the Laboratory using a SiteManager record, including the brand name, batch or lot number of each component, and the net weight (mass) as shown on the container of each component.		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t7.pdf Qualified Epoxy\Polyurethane Paints]. Sample each batch or lot of each component. A sample consists of one pint (500 mL) of each component. Submit the samples to the Laboratory using a SiteManager record, including the brand name, batch or lot number of each component, and the net weight (mass) as shown on the container of each component.

	===1045.2.8 Waterborne Acrylic System H Intermediate and Finish Coating===		===1045.2.8 Waterborne Acrylic System H Intermediate and Finish Coating===
	Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as		Refer to the applicable requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as
	[~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T8~~.pdf Qualified Waterborne Acrylic Paints]. Sample each batch or lot of each intermediate or finish coat.		[https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t8.pdf Qualified Waterborne Acrylic Paints]. Sample each batch or lot of each intermediate or finish coat.
	A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container.		A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through a SiteManager record, including the brand name, the batch or lot number of each component, and the net weight (mass) shown on the container.

	===1045.2.9 Aluminum Epoxy Mastic Primer===		===1045.2.9 Aluminum Epoxy Mastic Primer===
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Aluminum epoxy mastic primer is not suitable for use in contact with freshly poured concrete. Brands that have been qualified are listed in [~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T5~~.pdf Qualified Aluminum Epoxy Mastic Paint]. Sample each batch or lot submitted for use. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through a SiteManager record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.		Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. Aluminum epoxy mastic primer is not suitable for use in contact with freshly poured concrete. Brands that have been qualified are listed in [https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t5.pdf Qualified Aluminum Epoxy Mastic Paint]. Sample each batch or lot submitted for use. A sample consists of one pint (500 mL) of each component in friction top cans. Submit the sample to the Laboratory through a SiteManager record, including the brand name, batch or lot number(s) of each component, and the weight (mass) shown on each container.

	===1045.2.10 Gray Epoxy Mastic Primer===		===1045.2.10 Gray Epoxy Mastic Primer===
Line 100:		Line 100:

	===1045.2.11 Calcium Sulfonate===		===1045.2.11 Calcium Sulfonate===
	Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [~~http~~://www.modot.~~mo.gov~~/~~business~~/~~materials~~/~~pdf~~/~~vol_1~~/~~FS1045T10~~.pdf Qualified Calcium Sulfonate Overcoat Systems]. Sample each batch or lot of penetrating sealer, primer or finish coat. A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through a SiteManager record, including the brand name, the batch or lot number, and the weight (mass) shown on each container.		Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1045] for requirements pertaining to prequalification. The list of paints that are qualified by manufacturer and brand name appears as [https://www.modot.org/sites/default/files/documents/construction_and_materials/material_qualified_product_listing/fs1045t10.pdf Qualified Calcium Sulfonate Overcoat Systems]. Sample each batch or lot of penetrating sealer, primer or finish coat. A sample consists of one quart (1 L) in a friction top can. Submit the sample to the Laboratory through a SiteManager record, including the brand name, the batch or lot number, and the weight (mass) shown on each container.

	==1045.3 Acceptance==		==1045.3 Acceptance==