Category:1051 Slotted Drains - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-18T13:03:49Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 08:03, 18 October 2021
Line 24:		Line 24:
	==Report==		==Report==

	Inspection reports of slotted drains shall be made through ~~SiteManager~~. The report is to indicate acceptance or rejection. If the report indicates rejection, the reason for rejection shall be stated in the Free Form test. If the report indicates acceptance, the basis of acceptance of the metal, except when based exclusively on results of Laboratory tests, shall be stated in Free Form test as follows:		Inspection reports of slotted drains shall be made through AASHTOWARE Project (AWP). The report is to indicate acceptance or rejection. If the report indicates rejection, the reason for rejection shall be stated in the Free Form test. If the report indicates acceptance, the basis of acceptance of the metal, except when based exclusively on results of Laboratory tests, shall be stated in Free Form test as follows:

	:"Based on the approved brand and an examination of the material, we believe the material conforms to the requirements of the specifications. Fabrication is satisfactory. Material represented accepted."		:"Based on the approved brand and an examination of the material, we believe the material conforms to the requirements of the specifications. Fabrication is satisfactory. Material represented accepted."

	Random spot-checking for weight of coating or thickness, visual examination of helical lock seams or weld seams and tension testing of lock seams performed by the manufacturer is to be recorded in the inspector's diary and need not be recorded on the inspection report.		Random spot-checking for weight of coating or thickness, visual examination of helical lock seams or weld seams and tension testing of lock seams performed by the manufacturer is to be recorded in the inspector's diary and need not be recorded on the inspection report.

Smithk at 20:18, 10 October 2018

2018-10-10T20:18:43Z

← Older revision		Revision as of 15:18, 10 October 2018
Line 3:		Line 3:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

Smithk: updated link

2016-06-15T17:42:58Z

updated link

← Older revision		Revision as of 12:42, 15 June 2016
Line 6:		Line 6:
	\|}		\|}

	This article establishes procedures for inspection, acceptance and reporting of slotted drains. It provides the material inspection guidelines for [http://www.modot.~~mo.gov~~/business/standards_and_specs/~~Sec1051~~.pdf Sec 1051].		This article establishes procedures for inspection, acceptance and reporting of slotted drains. It provides the material inspection guidelines for [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1051].

	==Apparatus==		==Apparatus==

Smithk: /* Procedure */ minor clarification

2010-03-31T13:18:49Z

Procedure: minor clarification

← Older revision		Revision as of 08:18, 31 March 2010
Line 18:		Line 18:
	==Procedure==		==Procedure==

	'''Pipe.''' The portion of the slotted drain shall be inspected in accordance with [[:Category:1020 Corrugated Metallic-Coated Steel Culvert Pipe, Pipe-Arches and End Sections\|1020 Corrugated Metallic-Coated Steel Culvert Pipe,Pipe-Arches and End Sections]].		'''Pipe.''' The portion of the slotted drain shall be inspected in accordance with [[:Category:1020 Corrugated Metallic-Coated Steel Culvert Pipe, Pipe-Arches and End Sections\|EPG 1020 Corrugated Metallic-Coated Steel Culvert Pipe,Pipe-Arches and End Sections]].

	'''Slotted Drain Grate Assembly.''' The grate assembly shall be inspected for compliance with Sec 1051.		'''Slotted Drain Grate Assembly.''' The grate assembly shall be inspected for compliance with Sec 1051.

Smithk: article construction

2007-10-29T17:41:17Z

article construction

← Older revision		Revision as of 12:41, 29 October 2007
Line 1:		Line 1:
			{\|style="padding: 0.3em; margin-left:1px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right"
			\|-
			\|'''MGS Information'''
			\|-
			\|[http://www.modot.mo.gov/business/materials/pdf/mgs/MGSINDEX.pdf Current General Services Specifications (MGS) By Subject]
			\|}

	This article establishes procedures for inspection, acceptance and reporting of slotted drains. It provides the material inspection guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec1051.pdf Sec 1051].		This article establishes procedures for inspection, acceptance and reporting of slotted drains. It provides the material inspection guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec1051.pdf Sec 1051].

Smithk: /* Apparatus */ article construction

2007-05-10T20:11:23Z

Apparatus: article construction

← Older revision		Revision as of 15:11, 10 May 2007
Line 3:		Line 3:
	==Apparatus==		==Apparatus==

	:(a) Magnetic gauge, reading range 0-40 mils (0-1000 <math>\mu\,</math>m).		:(a) Magnetic gauge, reading range 0-40 mils (0-1000 <sub><math>\mu\,</math></sub>m).

	:(b) Micrometer capable of measuring to 0.0001 in. (0.00254 mm) and accurate to within at least 0.001 in. (0.0254 mm).		:(b) Micrometer capable of measuring to 0.0001 in. (0.00254 mm) and accurate to within at least 0.001 in. (0.0254 mm).

Smithk: new article from Materials Manual

2007-05-10T19:59:17Z

new article from Materials Manual

New page

This article establishes procedures for inspection, acceptance and reporting of slotted drains. It provides the material inspection guidelines for [http://www.modot.mo.gov/business/standards_and_specs/Sec1051.pdf Sec 1051].

==Apparatus==

:(a) Magnetic gauge, reading range 0-40 mils (0-1000 <math>\mu\,</math>m).

:(b) Micrometer capable of measuring to 0.0001 in. (0.00254 mm) and accurate to within at least 0.001 in. (0.0254 mm).

:(c) Rule with suitable graduations to accurately measure the material to be inspected.

==Procedure==

'''Pipe.''' The portion of the slotted drain shall be inspected in accordance with [[:Category:1020 Corrugated Metallic-Coated Steel Culvert Pipe, Pipe-Arches and End Sections|1020 Corrugated Metallic-Coated Steel Culvert Pipe,Pipe-Arches and End Sections]].

'''Slotted Drain Grate Assembly.''' The grate assembly shall be inspected for compliance with Sec 1051.

==Report==

Inspection reports of slotted drains shall be made through SiteManager. The report is to indicate acceptance or rejection. If the report indicates rejection, the reason for rejection shall be stated in the Free Form test. If the report indicates acceptance, the basis of acceptance of the metal, except when based exclusively on results of Laboratory tests, shall be stated in Free Form test as follows:

:"Based on the approved brand and an examination of the material, we believe the material conforms to the requirements of the specifications. Fabrication is satisfactory. Material represented accepted."

Random spot-checking for weight of coating or thickness, visual examination of helical lock seams or weld seams and tension testing of lock seams performed by the manufacturer is to be recorded in the inspector's diary and need not be recorded on the inspection report.