Category:1125 Liquid Calcium Chloride - Revision history

Hoskir: updated formatting and links

2025-01-07T20:54:40Z

updated formatting and links

← Older revision		Revision as of 15:54, 7 January 2025
Line 1:		Line 1:
	~~{\|style="padding: 0.3em; margin-left:1px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right"~~		</br>
	\|-
	~~\|'''MGS Information'''~~
	\|-
	~~\|[https:~~/~~/www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]~~
	\|}

	This article establishes procedures for inspecting and sampling liquid calcium chloride.		<div style="float: right; margin-top: 5px; margin-left: 30px; margin-bottom: 30px;">__TOC__</div>
	The requirements are set forth in the bid request issued by MoDOT.
			<div style="width: 250px; margin-top: 8px; margin-bottom: 8px; padding: 18px; border: 2px solid black; border-radius:5px; box-shadow:5px 5px 5px #888888">
			'''<u><center>MGS Information</center></u>'''
			<center>[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]</center>
			</div>


			This article establishes procedures for inspecting and sampling liquid calcium chloride. The requirements are set forth in the bid request issued by MoDOT.

	==1125.1 Apparatus==		==1125.1 Apparatus==
Line 13:		Line 15:

	==1125.2 Procedure==		==1125.2 Procedure==

	Each initial shipment per supplier per district on a purchase order shall be sampled and submitted to the Laboratory for testing of chloride content.		Each initial shipment per supplier per district on a purchase order shall be sampled and submitted to the Laboratory for testing of chloride content.

	Additional shipments shall be sampled for chloride content at minimum rate of 1 sample per 200 tons (180 mg) per supplier per district, approximately 200 gallons per ton (830 liters per mg).		Additional shipments shall be sampled for chloride content at minimum rate of 1 sample per 200 tons (180 mg) per supplier per district, approximately 200 gallons per ton (830 liters per mg).

	Sampling. A sample shall consist of approximately 1 gallon (4 liters) taken at the point of manufacture, intermediate storage, from the truck at delivery, or from the receiving tank.		'''Sampling'''. A sample shall consist of approximately 1 gallon (4 liters) taken at the point of manufacture, intermediate storage, from the truck at delivery, or from the receiving tank.

	The sample to be submitted to the Laboratory shall consist of approximately one gallon (4 liters) of material in a plastic jug.		The sample to be submitted to the Laboratory shall consist of approximately one gallon (4 liters) of material in a plastic jug.
Line 28:		Line 29:

	==1125.4 Laboratory Testing Guidelines==		==1125.4 Laboratory Testing Guidelines==
	This article establishes procedures for Laboratory testing and reporting samples of liquid calcium chloride for use as a deicer. The requirements are set forth in the bid request issued by MoDOT.		This article establishes procedures for Laboratory testing and reporting samples of liquid calcium chloride for use as a deicer. The requirements are set forth in the bid request issued by MoDOT.

			===1125.4.1 Procedure===
			Chemical analysis of liquid calcium chloride shall be conducted in accordance with [[106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride\|EPG 106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through AWP.

	===1125.4.~~1 Procedure~~===		===1125.4.2 Sample Record===
	~~Chemical analysis of liquid calcium chloride~~ shall be ~~conducted~~ in accordance with [~~[106~~.3.2.~~48 TM-48~~, ~~Determination of the Purity of Calcium Chloride~~\|EPG 106.~~3.2.48 TM-48, Determination of the Purity of Calcium Chloride~~]]~~. Original test data and calculations shall~~ be ~~recorded~~ in ~~Laboratory workbooks~~. Test results shall ~~then~~ be ~~recorded through AWP~~.		The sample record shall be completed in AASHTOWARE Project (AWP) in accordance with [https://epg.modot.org/forms/CM/AWP_MA_Sample_Record_General.docx AWP MA Sample Record, General], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

	~~===1125.4.2 Sample Record===~~		[[Category:1100_MAINTENANCE_MATERIALS]]
	~~The sample record shall be completed in AASHTOWARE Project (AWP) in accordance with~~ [[:Category:101 Standard Forms #Sample Record, General\|AWP MA Sample Record, General]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]]~~, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.~~

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-09-17T13:07:32Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 08:07, 17 September 2021
Line 25:		Line 25:
	Liquid calcium chloride sampled and submitted to the Laboratory will be reported in accordance with EPG 1125.4 Laboratory Testing Guidelines. A copy of the certification statement as required by the specifications shall accompany the sample to the Laboratory.		Liquid calcium chloride sampled and submitted to the Laboratory will be reported in accordance with EPG 1125.4 Laboratory Testing Guidelines. A copy of the certification statement as required by the specifications shall accompany the sample to the Laboratory.

	Use ~~SiteManager~~ field reporting of liquid calcium chloride. All field reports shall include the Laboratory number under which the chemical composition was tested and accepted as well as invoice or load number and the quantities being reported. Material not sampled may be accepted on the basis of certifications and other field inspection. The report is to indicate acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection. All shipments are to be reported by the district.		Use AASHTOWARE Project (AWP) field reporting of liquid calcium chloride. All field reports shall include the Laboratory number under which the chemical composition was tested and accepted as well as invoice or load number and the quantities being reported. Material not sampled may be accepted on the basis of certifications and other field inspection. The report is to indicate acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection. All shipments are to be reported by the district.

	==1125.4 Laboratory Testing Guidelines==		==1125.4 Laboratory Testing Guidelines==
Line 31:		Line 31:

	===1125.4.1 Procedure===		===1125.4.1 Procedure===
	Chemical analysis of liquid calcium chloride shall be conducted in accordance with [[106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride\|EPG 106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through ~~SiteManager~~.		Chemical analysis of liquid calcium chloride shall be conducted in accordance with [[106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride\|EPG 106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through AWP.

	===1125.4.2 Sample Record===		===1125.4.2 Sample Record===
	The sample record shall be completed in ~~SiteManager, as described~~ in [[:Category:101 Standard Forms#Sample Record General ~~Information~~\| Sample Record General ~~Information]] [[image:bulldozer.jpg\|20px~~]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in AASHTOWARE Project (AWP) in accordance with [[:Category:101 Standard Forms #Sample Record, General\|AWP MA Sample Record, General]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: updated link

2018-10-16T13:23:28Z

updated link

← Older revision		Revision as of 08:23, 16 October 2018
Line 3:		Line 3:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

Smithk: /* 1125.3 Report */

2013-08-22T13:57:14Z

1125.3 Report

← Older revision		Revision as of 08:57, 22 August 2013
Line 23:		Line 23:

	==1125.3 Report==		==1125.3 Report==
	Liquid calcium chloride sampled and submitted to the Laboratory will be reported in accordance with 1125.4 Laboratory Testing Guidelines. A copy of the certification statement as required by the specifications shall accompany the sample to the Laboratory.		Liquid calcium chloride sampled and submitted to the Laboratory will be reported in accordance with EPG 1125.4 Laboratory Testing Guidelines. A copy of the certification statement as required by the specifications shall accompany the sample to the Laboratory.

	Use SiteManager field reporting of liquid calcium chloride. All field reports shall include the Laboratory number under which the chemical composition was tested and accepted as well as invoice or load number and the quantities being reported. Material not sampled may be accepted on the basis of certifications and other field inspection. The report is to indicate acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection. All shipments are to be reported by the district.		Use SiteManager field reporting of liquid calcium chloride. All field reports shall include the Laboratory number under which the chemical composition was tested and accepted as well as invoice or load number and the quantities being reported. Material not sampled may be accepted on the basis of certifications and other field inspection. The report is to indicate acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection. All shipments are to be reported by the district.

Smithk: updated link

2013-08-22T13:56:51Z

updated link

← Older revision		Revision as of 08:56, 22 August 2013
Line 34:		Line 34:

	===1125.4.2 Sample Record===		===1125.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [~~http~~:~~//contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510~~.~~pdf Automation Section 3510~~], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1125.4.2 Sample Record */ Per CM, updated link to AS 3510

2011-07-05T20:34:45Z

1125.4.2 Sample Record: Per CM, updated link to AS 3510

← Older revision		Revision as of 15:34, 5 July 2011
Line 34:		Line 34:

	===1125.4.2 Sample Record===		===1125.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://~~wwwi~~/~~intranet~~/cm/~~materials~~/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1125.3 Report */ updated link

2010-07-01T19:14:17Z

1125.3 Report: updated link

← Older revision		Revision as of 14:14, 1 July 2010
Line 25:		Line 25:
	Liquid calcium chloride sampled and submitted to the Laboratory will be reported in accordance with 1125.4 Laboratory Testing Guidelines. A copy of the certification statement as required by the specifications shall accompany the sample to the Laboratory.		Liquid calcium chloride sampled and submitted to the Laboratory will be reported in accordance with 1125.4 Laboratory Testing Guidelines. A copy of the certification statement as required by the specifications shall accompany the sample to the Laboratory.

	Use SiteManager field reporting of liquid calcium chloride. All field reports shall include the Laboratory number under which the chemical composition was tested and accepted as well as invoice or load number and the quantities being reported. Material not sampled may be accepted on the basis of certifications and other field inspection. The report is to indicate acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting ~~Test Results~~\|EPG 106.9 Reporting ~~Test Results~~]], are to be included in the report to clarify conditions of acceptance or rejection. All shipments are to be reported by the district.		Use SiteManager field reporting of liquid calcium chloride. All field reports shall include the Laboratory number under which the chemical composition was tested and accepted as well as invoice or load number and the quantities being reported. Material not sampled may be accepted on the basis of certifications and other field inspection. The report is to indicate acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the report to clarify conditions of acceptance or rejection. All shipments are to be reported by the district.

	==1125.4 Laboratory Testing Guidelines==		==1125.4 Laboratory Testing Guidelines==

Smithk: /* 1125.4.2 Sample Record */ updated link

2010-07-01T18:19:19Z

1125.4.2 Sample Record: updated link

← Older revision		Revision as of 13:19, 1 July 2010
Line 34:		Line 34:

	===1125.4.2 Sample Record===		===1125.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting ~~Test Results~~\|EPG 106.9 Reporting ~~Test Results~~]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1125.4.1 Procedure */ updated link

2010-06-30T19:58:34Z

1125.4.1 Procedure: updated link

← Older revision		Revision as of 14:58, 30 June 2010
Line 31:		Line 31:

	===1125.4.1 Procedure===		===1125.4.1 Procedure===
	Chemical analysis of liquid calcium chloride shall be conducted in accordance with [[106.7.48 TM-48, Determination of the Purity of Calcium Chloride\|EPG 106.7.48 TM-48, Determination of the Purity of Calcium Chloride]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager.		Chemical analysis of liquid calcium chloride shall be conducted in accordance with [[106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride\|EPG 106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager.

	===1125.4.2 Sample Record===		===1125.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1125.4.1 Procedure */ minor clarification

2010-04-07T18:03:10Z

1125.4.1 Procedure: minor clarification

← Older revision		Revision as of 13:03, 7 April 2010
Line 31:		Line 31:

	===1125.4.1 Procedure===		===1125.4.1 Procedure===
	Chemical analysis of liquid calcium chloride shall be conducted in accordance with [[106.7.48 TM-48, Determination of the Purity of Calcium Chloride\|106.7.48 TM-48, Determination of the Purity of Calcium Chloride]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager.		Chemical analysis of liquid calcium chloride shall be conducted in accordance with [[106.7.48 TM-48, Determination of the Purity of Calcium Chloride\|EPG 106.7.48 TM-48, Determination of the Purity of Calcium Chloride]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager.

	===1125.4.2 Sample Record===		===1125.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.