Category:626 Rumble Strips - Revision history

Smithk: Per TS, replaced now-archaic special sheet with link to new Std. Plan 626.00.

2021-07-27T18:39:59Z

Per TS, replaced now-archaic special sheet with link to new Std. Plan 626.00.

← Older revision		Revision as of 13:39, 27 July 2021
Line 2:		Line 2:
	{\| style="padding:0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="right"		{\| style="padding:0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="right"
	\|-		\|-
	\|'''~~Forms~~'''		\|'''Form'''
	\|-		\|-
	\|[[media:131.4 Design Exception Info.doc\|Design Exception Information Form]]		\|[[media:131.4 Design Exception Info.doc\|Design Exception Information Form]]
	\|-		\|-
	\|[[media~~:232~~.~~2 Passing Lane Special Sheet~~.~~pdf\|Passing Lane Special Sheet]~~]		\|'''Additional Information'''
			\|-
			\|[https://www.modot.org/media/16900 Std. Plan 626.00 Rumble Strips]
	\|}		\|}

Smithk: Per TS, minor clarifications

2020-11-12T17:01:46Z

Per TS, minor clarifications

← Older revision		Revision as of 12:01, 12 November 2020
Line 11:		Line 11:
	Rumble strips are a grooved pattern in the pavement that improves safety by alerting drivers as they unintentionally stray from the roadway. The grooves alert drivers by causing the vehicle’s wheels to noisily and suddenly vibrate when it leaves the driving lane.		Rumble strips are a grooved pattern in the pavement that improves safety by alerting drivers as they unintentionally stray from the roadway. The grooves alert drivers by causing the vehicle’s wheels to noisily and suddenly vibrate when it leaves the driving lane.

	This article deals with both [[626.1 Edgeline Rumble Strips\|edgeline]] and [[626.2 Centerline Rumble Strips\|centerline rumble strips]] as well as the [[626.3 Construction Inspection Guidelines for Sec 626\|construction inspection guidelines]] that must be considered to achieve a high-quality product. Guidance is also presented for transverse rumble strips, warning devices placed perpendicular to traffic across the driving lane.		This article deals with both [[626.1 Edgeline Rumble Strips\|edgeline]] and [[626.2 Centerline Rumble Strips\|centerline rumble strips]] as well as the [[626.3 Construction Inspection Guidelines for Sec 626\|construction inspection guidelines]] that must be considered to achieve a high-quality product. Guidance is also presented for transverse rumble strips that are warning devices placed perpendicular to traffic across the driving lane.

	For information on Temporary Rumble Strips for use in work zones, refer to [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)#616.6.87 Temporary Rumble Strips (MUTCD 6F.87)\|EPG 616.6.87 Temporary Rumble Strips (MUTCD 6F.87)]].		For information on Temporary Rumble Strips for use in work zones, refer to [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)#616.6.87 Temporary Rumble Strips (MUTCD 6F.87)\|EPG 616.6.87 Temporary Rumble Strips (MUTCD 6F.87)]].

	'''District Responsibility.''' Collaboration with the Highway Safety and Traffic Division and the Design Division is necessary prior to approval of a design exception to omit or modify these system-wide safety improvements (such as rumble strips) on a project.		'''District Responsibility.''' Collaboration with the Central Office Highway Safety and Traffic Division and the Design Division is necessary prior to approval of a design exception to omit or modify these system-wide safety improvements (such as rumble strips) on a project.

	It is the district's responsibility to re-install obliterated or deteriorated rumble strips.		It is the district's responsibility to re-install obliterated or deteriorated rumble strips.

Kleins1: corrected misspelling

2018-11-02T19:57:44Z

corrected misspelling

← Older revision		Revision as of 14:57, 2 November 2018
Line 11:		Line 11:
	Rumble strips are a grooved pattern in the pavement that improves safety by alerting drivers as they unintentionally stray from the roadway. The grooves alert drivers by causing the vehicle’s wheels to noisily and suddenly vibrate when it leaves the driving lane.		Rumble strips are a grooved pattern in the pavement that improves safety by alerting drivers as they unintentionally stray from the roadway. The grooves alert drivers by causing the vehicle’s wheels to noisily and suddenly vibrate when it leaves the driving lane.

	This article deals with both [[626.1 Edgeline Rumble Strips\|edgeline]] and [[626.2 Centerline Rumble Strips\|centerline rumble strips]] as well as the [[626.3 Construction Inspection Guidelines for Sec 626\|construction inspection guidelines]] that must be considered to achieve a high-quality product. Guidance is also presented for transverse rumble strips, warning devices placed perpendicular to ~~trffic~~ across the driving lane.		This article deals with both [[626.1 Edgeline Rumble Strips\|edgeline]] and [[626.2 Centerline Rumble Strips\|centerline rumble strips]] as well as the [[626.3 Construction Inspection Guidelines for Sec 626\|construction inspection guidelines]] that must be considered to achieve a high-quality product. Guidance is also presented for transverse rumble strips, warning devices placed perpendicular to traffic across the driving lane.

	For information on Temporary Rumble Strips for use in work zones, refer to [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)#616.6.87 Temporary Rumble Strips (MUTCD 6F.87)\|EPG 616.6.87 Temporary Rumble Strips (MUTCD 6F.87)]].		For information on Temporary Rumble Strips for use in work zones, refer to [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)#616.6.87 Temporary Rumble Strips (MUTCD 6F.87)\|EPG 616.6.87 Temporary Rumble Strips (MUTCD 6F.87)]].

Smithk: Per CM, clarified the location of the rumbles strips and pavement markings for differing shoulder and pavement conditions. It also revised the minimum pavement thickness from 1 3/4" to 1".

2018-10-23T18:32:09Z

Per CM, clarified the location of the rumbles strips and pavement markings for differing shoulder and pavement conditions. It also revised the minimum pavement thickness from 1 3/4" to 1".

@@ Line 9: / Line 9: @@
 |}
-Rumble strips are a grooved pattern in the pavement that make road travel safer for motorized vehicles.  The grooves alert drivers by causing the vehicle’s wheels to noisily and suddenly vibrate when it leaves the driving lane.
+Rumble strips are a grooved pattern in the pavement that improves safety by alerting drivers as they unintentionally stray from the roadway. The grooves alert drivers by causing the vehicle’s wheels to noisily and suddenly vibrate when it leaves the driving lane.
-This article deals with both edgeline and centerline rumble strips as well as the [[626.3 Construction Inspection Guidelines for Sec 626|construction inspection guidelines]] that must be considered to achieve a high-quality product.  Guidance is also presented for [[626.4 Transverse Rumble Strips|transverse rumble strips]], warning devices placed in the driving lane.
+This article deals with both [[626.1 Edgeline Rumble Strips|edgeline]] and [[626.2 Centerline Rumble Strips|centerline rumble strips]] as well as the [[626.3 Construction Inspection Guidelines for Sec 626|construction inspection guidelines]] that must be considered to achieve a high-quality product. Guidance is also presented for transverse rumble strips, warning devices placed perpendicular to trffic across the driving lane.
 For information on Temporary Rumble Strips for use in work zones, refer to [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)#616.6.87 Temporary Rumble Strips (MUTCD 6F.87)|EPG 616.6.87 Temporary Rumble Strips (MUTCD 6F.87)]].
-'''District Responsibility.''' A higher level of collaboration with the Traffic and Design Divisions of Central Office is necessary prior to a District Engineer’s approval of a design exception to omit or modify systemwide safety improvements (such as rumble strips) on a project.
+'''District Responsibility.''' Collaboration with the Highway Safety and Traffic Division and the Design Division is necessary prior to approval of a design exception to omit or modify these system-wide safety improvements (such as rumble strips) on a project.
 It is the district's responsibility to re-install obliterated or deteriorated rumble strips.

Smithk: /* 626.1 Edgeline Rumble Strips */

2018-09-28T13:55:18Z

626.1 Edgeline Rumble Strips

← Older revision		Revision as of 08:55, 28 September 2018
Line 38:		Line 38:
	Edgeline rumble strips may be used on minor roadways as a specific safety countermeasure with a paved shoulder. Where several sections of edgeline rumble strips are installed in close proximity, continuity should be maintained.		Edgeline rumble strips may be used on minor roadways as a specific safety countermeasure with a paved shoulder. Where several sections of edgeline rumble strips are installed in close proximity, continuity should be maintained.

	Edgeline rumble strips are to be milled into bituminous and portland cement concrete. Milling has little or no effect on the integrity of the pavement structure and milled rumble strips produce greater noise and vibration than rolled or formed rumble strips. Refer to [~~http~~://www.modot.~~mo.gov/business/standards_and_specs~~/~~documents~~/~~62600.pdf~~ Standard Plan 626.00] for details. Edgeline rumble strips are omitted between the radius points for side road approaches, entrances and median crossovers. Edgeline rumble strips should be omitted on bridges and on ramps for diamond, single point, partial cloverleaf and similar types of [[:category:234 Interchanges\|interchanges]], but may be considered on longer ramps for directional or other large interchanges. The length of edgeline rumble strip installation is to be estimated and pay items provided.		Edgeline rumble strips are to be milled into bituminous and portland cement concrete. Milling has little or no effect on the integrity of the pavement structure and milled rumble strips produce greater noise and vibration than rolled or formed rumble strips. Refer to [https://www.modot.org/media/16900 Standard Plan 626.00] for details. Edgeline rumble strips are omitted between the radius points for side road approaches, entrances and median crossovers. Edgeline rumble strips should be omitted on bridges and on ramps for diamond, single point, partial cloverleaf and similar types of [[:category:234 Interchanges\|interchanges]], but may be considered on longer ramps for directional or other large interchanges. The length of edgeline rumble strip installation is to be estimated and pay items provided.

	Edgeline [[:category:620 Pavement Marking\|pavement marking]] material is sprayed over the rumble strip, creating what is often called a “rumble stripe.”		Edgeline [[:category:620 Pavement Marking\|pavement marking]] material is sprayed over the rumble strip, creating what is often called a “rumble stripe.”

Smithk: updated links

2016-02-02T14:38:18Z

updated links

← Older revision		Revision as of 09:38, 2 February 2016
Line 22:		Line 22:
	[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]		[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]

	Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/~~MajorHighwaySystem2015~~.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.		Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/MajorHighwaySystem8302015.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.

	In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.		In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.
Line 45:		Line 45:

	[[Image:626.2 Centerline Rumble Strip Marking for Two Lane Roadway.jpg\|right\| 200px\|thumb\|<center>''' Centerline Rumble Strip Marking for Two-Lane Roadway'''</center>]]		[[Image:626.2 Centerline Rumble Strip Marking for Two Lane Roadway.jpg\|right\| 200px\|thumb\|<center>''' Centerline Rumble Strip Marking for Two-Lane Roadway'''</center>]]
	All two-lane [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/~~MajorHighwaySystem2015~~.pdf major roads] with new pavement will have centerline rumble strips (see figure at right) unless the posted is less than 50 mph. Centerline rumble strips are provided on all major two-lane roads, and on minor roads with a cross-centerline [http://www.modot.mo.gov/safety/trafficaccidentstatistics.htm accident history]. Rumble strips on a centerline have been shown to reduce head-on crashes by alerting drivers that they are leaving their lane of travel. On roadways with a travelway width of 20 ft., centerline rumble strips become obtrusive and are not recommended.		All two-lane [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/MajorHighwaySystem8302015.pdf major roads] with new pavement will have centerline rumble strips (see figure at right) unless the posted is less than 50 mph. Centerline rumble strips are provided on all major two-lane roads, and on minor roads with a cross-centerline [http://www.modot.mo.gov/safety/trafficaccidentstatistics.htm accident history]. Rumble strips on a centerline have been shown to reduce head-on crashes by alerting drivers that they are leaving their lane of travel. On roadways with a travelway width of 20 ft., centerline rumble strips become obtrusive and are not recommended.

	[[image:626.2 Passing Lane Centerline Rumble Strip marking.jpg\|left\| 275px\|thumb\|<center>'''[[232.2 Passing Lanes\|Passing Lane]] Centerline Rumble Strip Marking'''</center>]]		[[image:626.2 Passing Lane Centerline Rumble Strip marking.jpg\|left\| 275px\|thumb\|<center>'''[[232.2 Passing Lanes\|Passing Lane]] Centerline Rumble Strip Marking'''</center>]]

Smithk: Per MT, updated major road link

2015-05-14T19:47:25Z

Per MT, updated major road link

← Older revision		Revision as of 14:47, 14 May 2015
Line 22:		Line 22:
	[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]		[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]

	Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://~~wwwi~~/~~intranet~~/tp/~~documents~~/~~Major_Highway_System~~.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.		Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/MajorHighwaySystem2015.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.

	In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.		In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.
Line 45:		Line 45:

	[[Image:626.2 Centerline Rumble Strip Marking for Two Lane Roadway.jpg\|right\| 200px\|thumb\|<center>''' Centerline Rumble Strip Marking for Two-Lane Roadway'''</center>]]		[[Image:626.2 Centerline Rumble Strip Marking for Two Lane Roadway.jpg\|right\| 200px\|thumb\|<center>''' Centerline Rumble Strip Marking for Two-Lane Roadway'''</center>]]
	All two-lane [http://~~wwwi~~/~~intranet~~/tp/~~documents~~/~~Major_Highway_System~~.pdf major roads] with new pavement will have centerline rumble strips (see figure at right) unless the posted is less than 50 mph. Centerline rumble strips are provided on all major two-lane roads, and on minor roads with a cross-centerline [http://www.modot.mo.gov/safety/trafficaccidentstatistics.htm accident history]. Rumble strips on a centerline have been shown to reduce head-on crashes by alerting drivers that they are leaving their lane of travel. On roadways with a travelway width of 20 ft., centerline rumble strips become obtrusive and are not recommended.		All two-lane [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/MajorHighwaySystem2015.pdf major roads] with new pavement will have centerline rumble strips (see figure at right) unless the posted is less than 50 mph. Centerline rumble strips are provided on all major two-lane roads, and on minor roads with a cross-centerline [http://www.modot.mo.gov/safety/trafficaccidentstatistics.htm accident history]. Rumble strips on a centerline have been shown to reduce head-on crashes by alerting drivers that they are leaving their lane of travel. On roadways with a travelway width of 20 ft., centerline rumble strips become obtrusive and are not recommended.

	[[image:626.2 Passing Lane Centerline Rumble Strip marking.jpg\|left\| 275px\|thumb\|<center>'''[[232.2 Passing Lanes\|Passing Lane]] Centerline Rumble Strip Marking'''</center>]]		[[image:626.2 Passing Lane Centerline Rumble Strip marking.jpg\|left\| 275px\|thumb\|<center>'''[[232.2 Passing Lanes\|Passing Lane]] Centerline Rumble Strip Marking'''</center>]]

Smithk: /* 626.1 Edgeline Rumble Strips */Per Design, EPG 626.1 was revised to offer the option for offsetting the rumble strips or their limited use in urban areas.

2014-02-19T20:44:02Z

626.1 Edgeline Rumble Strips: Per Design, EPG 626.1 was revised to offer the option for offsetting the rumble strips or their limited use in urban areas.

← Older revision		Revision as of 15:44, 19 February 2014
Line 22:		Line 22:
	[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]		[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]

	Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://wwwi/intranet/tp/documents/Major_Highway_System.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph. In urban areas, ~~edgeline~~ rumble strips may be omitted ~~on major roads with a~~ [[131.1 Design Exception Process\|design exception]] ~~(e.g., noise is a significant issue and safety is not a significant issue)~~.		Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://wwwi/intranet/tp/documents/Major_Highway_System.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.

			In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.
	{\|style="padding: 0.3em; margin-right:7px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#ffddcc" width="210px" align="left"		{\|style="padding: 0.3em; margin-right:7px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#ffddcc" width="210px" align="left"
	\|-		\|-

Smithk: Added link to

2013-06-17T19:59:25Z

Added link to

← Older revision		Revision as of 14:59, 17 June 2013
Line 12:		Line 12:

	This article deals with both edgeline and centerline rumble strips as well as the [[626.3 Construction Inspection Guidelines for Sec 626\|construction inspection guidelines]] that must be considered to achieve a high-quality product. Guidance is also presented for [[626.4 Transverse Rumble Strips\|transverse rumble strips]], warning devices placed in the driving lane.		This article deals with both edgeline and centerline rumble strips as well as the [[626.3 Construction Inspection Guidelines for Sec 626\|construction inspection guidelines]] that must be considered to achieve a high-quality product. Guidance is also presented for [[626.4 Transverse Rumble Strips\|transverse rumble strips]], warning devices placed in the driving lane.

			For information on Temporary Rumble Strips for use in work zones, refer to [[616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)#616.6.87 Temporary Rumble Strips (MUTCD 6F.87)\|EPG 616.6.87 Temporary Rumble Strips (MUTCD 6F.87)]].

	'''District Responsibility.''' A higher level of collaboration with the Traffic and Design Divisions of Central Office is necessary prior to a District Engineer’s approval of a design exception to omit or modify systemwide safety improvements (such as rumble strips) on a project.		'''District Responsibility.''' A higher level of collaboration with the Traffic and Design Divisions of Central Office is necessary prior to a District Engineer’s approval of a design exception to omit or modify systemwide safety improvements (such as rumble strips) on a project.

Smithk: /* 626.2 Centerline Rumble Strips */ Per CM, centerline rumble strips are permitted on joints. This brings guidance into compliance with Std. Plan 626.00.

2013-06-05T18:13:08Z

626.2 Centerline Rumble Strips: Per CM, centerline rumble strips are permitted on joints. This brings guidance into compliance with Std. Plan 626.00.

← Older revision		Revision as of 13:13, 5 June 2013
Line 51:		Line 51:
	[[Image:626.2 Median Rumble Strip passing.gif\|right\| 500px\|thumb\|<center>''' Example of a Median Rumble Strip with Passing Lanes'''</center>]]		[[Image:626.2 Median Rumble Strip passing.gif\|right\| 500px\|thumb\|<center>''' Example of a Median Rumble Strip with Passing Lanes'''</center>]]

	In order to maintain the integrity of the rumble strip and the pavement, the pavement material must be either concrete or the final lift of bituminous material must be least 1 3/4 in. thick, and the pavement must have a final asphalt thickness of at least 3 3/4 in. Centerline rumble strips are not to be placed on bridges or within the limits of an intersection with left turn lanes. The limits of the intersection are defined by the beginning of the tapers for the left turn lanes. ~~Centerline rumble strips are not to be placed on any joint. Longitudinal joints shall be offset 10 in. to accommodate the width of the rumble strip.~~ The length of centerline rumble strip installation should be estimated and pay items provided.		In order to maintain the integrity of the rumble strip and the pavement, the pavement material must be either concrete or the final lift of bituminous material must be least 1 3/4 in. thick, and the pavement must have a final asphalt thickness of at least 3 3/4 in. Centerline rumble strips are not to be placed on bridges or within the limits of an intersection with left turn lanes. The limits of the intersection are defined by the beginning of the tapers for the left turn lanes. The length of centerline rumble strip installation should be estimated and pay items provided.

← Older revision		Revision as of 09:38, 2 February 2016
Line 22:		Line 22:
	[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]		[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]

	Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/~~MajorHighwaySystem2015~~.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.		Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/MajorHighwaySystem8302015.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.

	In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.		In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.
Line 45:		Line 45:

	[[Image:626.2 Centerline Rumble Strip Marking for Two Lane Roadway.jpg\|right\| 200px\|thumb\|<center>''' Centerline Rumble Strip Marking for Two-Lane Roadway'''</center>]]		[[Image:626.2 Centerline Rumble Strip Marking for Two Lane Roadway.jpg\|right\| 200px\|thumb\|<center>''' Centerline Rumble Strip Marking for Two-Lane Roadway'''</center>]]
	All two-lane [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/~~MajorHighwaySystem2015~~.pdf major roads] with new pavement will have centerline rumble strips (see figure at right) unless the posted is less than 50 mph. Centerline rumble strips are provided on all major two-lane roads, and on minor roads with a cross-centerline [http://www.modot.mo.gov/safety/trafficaccidentstatistics.htm accident history]. Rumble strips on a centerline have been shown to reduce head-on crashes by alerting drivers that they are leaving their lane of travel. On roadways with a travelway width of 20 ft., centerline rumble strips become obtrusive and are not recommended.		All two-lane [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/MajorHighwaySystem8302015.pdf major roads] with new pavement will have centerline rumble strips (see figure at right) unless the posted is less than 50 mph. Centerline rumble strips are provided on all major two-lane roads, and on minor roads with a cross-centerline [http://www.modot.mo.gov/safety/trafficaccidentstatistics.htm accident history]. Rumble strips on a centerline have been shown to reduce head-on crashes by alerting drivers that they are leaving their lane of travel. On roadways with a travelway width of 20 ft., centerline rumble strips become obtrusive and are not recommended.

	[[image:626.2 Passing Lane Centerline Rumble Strip marking.jpg\|left\| 275px\|thumb\|<center>'''[[232.2 Passing Lanes\|Passing Lane]] Centerline Rumble Strip Marking'''</center>]]		[[image:626.2 Passing Lane Centerline Rumble Strip marking.jpg\|left\| 275px\|thumb\|<center>'''[[232.2 Passing Lanes\|Passing Lane]] Centerline Rumble Strip Marking'''</center>]]

← Older revision		Revision as of 14:47, 14 May 2015
Line 22:		Line 22:
	[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]		[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]

	Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://~~wwwi~~/~~intranet~~/tp/~~documents~~/~~Major_Highway_System~~.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.		Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/MajorHighwaySystem2015.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.

	In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.		In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.
Line 45:		Line 45:

	[[Image:626.2 Centerline Rumble Strip Marking for Two Lane Roadway.jpg\|right\| 200px\|thumb\|<center>''' Centerline Rumble Strip Marking for Two-Lane Roadway'''</center>]]		[[Image:626.2 Centerline Rumble Strip Marking for Two Lane Roadway.jpg\|right\| 200px\|thumb\|<center>''' Centerline Rumble Strip Marking for Two-Lane Roadway'''</center>]]
	All two-lane [http://~~wwwi~~/~~intranet~~/tp/~~documents~~/~~Major_Highway_System~~.pdf major roads] with new pavement will have centerline rumble strips (see figure at right) unless the posted is less than 50 mph. Centerline rumble strips are provided on all major two-lane roads, and on minor roads with a cross-centerline [http://www.modot.mo.gov/safety/trafficaccidentstatistics.htm accident history]. Rumble strips on a centerline have been shown to reduce head-on crashes by alerting drivers that they are leaving their lane of travel. On roadways with a travelway width of 20 ft., centerline rumble strips become obtrusive and are not recommended.		All two-lane [http://sharepoint/systemdelivery/TP/sysanlysis/dmas/Shared%20Documents/Maps/MajorHighwaySystem2015.pdf major roads] with new pavement will have centerline rumble strips (see figure at right) unless the posted is less than 50 mph. Centerline rumble strips are provided on all major two-lane roads, and on minor roads with a cross-centerline [http://www.modot.mo.gov/safety/trafficaccidentstatistics.htm accident history]. Rumble strips on a centerline have been shown to reduce head-on crashes by alerting drivers that they are leaving their lane of travel. On roadways with a travelway width of 20 ft., centerline rumble strips become obtrusive and are not recommended.

	[[image:626.2 Passing Lane Centerline Rumble Strip marking.jpg\|left\| 275px\|thumb\|<center>'''[[232.2 Passing Lanes\|Passing Lane]] Centerline Rumble Strip Marking'''</center>]]		[[image:626.2 Passing Lane Centerline Rumble Strip marking.jpg\|left\| 275px\|thumb\|<center>'''[[232.2 Passing Lanes\|Passing Lane]] Centerline Rumble Strip Marking'''</center>]]

← Older revision		Revision as of 15:44, 19 February 2014
Line 22:		Line 22:
	[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]		[[image:626 Edgeline Rumble Strips.jpg\|right\|350px\|thumb\|<center>'''Edgeline Rumble Strips'''</center>]]

	Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://wwwi/intranet/tp/documents/Major_Highway_System.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph. In urban areas, ~~edgeline~~ rumble strips may be omitted ~~on major roads with a~~ [[131.1 Design Exception Process\|design exception]] ~~(e.g., noise is a significant issue and safety is not a significant issue)~~.		Edgeline rumble strips are used to enhance [http://www.modot.mo.gov/safety safety] on every [[231.4 Shoulder Width\|shoulder]] at least 2 ft. wide, unless the shoulder has a curbed section or is intended to be used as a future travel lane. Rumble strips are omitted where the posted speed is less than 50 mph. All [http://wwwi/intranet/tp/documents/Major_Highway_System.pdf major roads] will have edgeline rumble strips unless the posted speed is less than 50 mph.

			In urban areas, where noise has been identified as a significant issue, the preferred method of mitigation is to offset the rumble strip 1 ft. onto the shoulder. In areas where this offset would be insufficient, rumble strips may be omitted for short sections, by [[131.1 Design Exception Process\|design exception]] only.
	{\|style="padding: 0.3em; margin-right:7px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#ffddcc" width="210px" align="left"		{\|style="padding: 0.3em; margin-right:7px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#ffddcc" width="210px" align="left"
	\|-		\|-