Category:1130 Traffic Signal Lamps: Difference between revisions
m updated link |
updated formatting and links |
||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
</br> | |||
<div style="float: right; margin-top: 5px; margin-left: 30px; margin-bottom: 30px;">__TOC__</div> | |||
<div style="width: 250px; margin-top: 8px; margin-bottom: 8px; padding: 18px; border: 2px solid black; border-radius:5px; box-shadow:5px 5px 5px #888888"> | |||
'''<u><center>MGS Information</center></u>''' | |||
<center>[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]</center> | |||
</div> | |||
This article establishes procedures for inspecting and sampling traffic signal lamps purchased to comply with the bid request issued by MoDOT. | This article establishes procedures for inspecting and sampling traffic signal lamps purchased to comply with the bid request issued by MoDOT. | ||
==1130.1 Procedure== | ==1130.1 Procedure== | ||
Refer to | Refer to [https://epg.modot.org/forms/general_files/CM/Appendix_7.1.doc Signal Bulb Inspection Process]. | ||
==1130.2 Laboratory Testing Guidelines== | ==1130.2 Laboratory Testing Guidelines== | ||
This article establishes procedures for sampling, testing and reporting traffic signal lamps purchased to comply with the bid request issued by MoDOT. | |||
===1130.2.1 Testing=== | |||
Samples shall be subjected to a Laboratory visual examination to determine compliance for light center length, markings, position of burning, bulb type, base type, and filament type. Manufacturer's certifications shall be checked for compliance with all requirements of the bid request. Data on Laboratory findings shall be recorded in Laboratory workbooks. This information shall then be recorded through AASHTOWARE Project (AWP). | |||
===1130.2. | ===1130.2.2 Sample Record=== | ||
The sample record shall be completed in AASHTOWARE Project (AWP) in accordance with [https://epg.modot.org/forms/CM/AWP_MA_Sample_Record_General.docx AWP MA Sample Record, General], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab. | |||
[[Category:1100_MAINTENANCE_MATERIALS]] | |||
Latest revision as of 14:42, 7 January 2025
This article establishes procedures for inspecting and sampling traffic signal lamps purchased to comply with the bid request issued by MoDOT.
1130.1 Procedure
Refer to Signal Bulb Inspection Process.
1130.2 Laboratory Testing Guidelines
This article establishes procedures for sampling, testing and reporting traffic signal lamps purchased to comply with the bid request issued by MoDOT.
1130.2.1 Testing
Samples shall be subjected to a Laboratory visual examination to determine compliance for light center length, markings, position of burning, bulb type, base type, and filament type. Manufacturer's certifications shall be checked for compliance with all requirements of the bid request. Data on Laboratory findings shall be recorded in Laboratory workbooks. This information shall then be recorded through AASHTOWARE Project (AWP).
1130.2.2 Sample Record
The sample record shall be completed in AASHTOWARE Project (AWP) in accordance with AWP MA Sample Record, General, and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.