Difference between revisions of "822.6 Best Practices"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (add article)
 
(Old EPG 822.6 had 1576 and no significant revisions since its beginning in June 2007)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
'''Safety'''
+
{|style="padding: 0.3em; margin-left:15px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="240px" align="center"
 
+
|-
:* Personnel engaged in mowing should be trained in the operation of mowers and must be familiar with the applicable safety guidelines as set forth in [http://lnapp1/RI/RIManual.NSF/2cfd1a8d7c4213d7862562d900795ea7/b507c95012db0cf7862570f3005d7891/$FILE/Safety%20Rules%20Handbook%203%20for%20Web.pdf MoDOT's Safety Policies, Rules & Regulations] employee handbook.
+
|'''This article has moved'''
 
+
|-
:* Tractor tires should be set at the appropriate tread width and inflation that provides optimum stability.  Always consult the operator's manual before making any adjustments to the tractor tires.
+
|EPG 822.6 Best Practices has been updated and moved to [[822.4 Best Practices|EPG 822.4 Best Practices]].  The content was updated to reflect Practical Operations.
 
+
|}
:* For safety concerns and appearance purposes, a cut should not be made on top of rock cuts or down from the top of an unmowed slope.
 
 
 
:* Dead trees and limbs, fallen or standing, which may create a hazard, should be promptly removed.
 
 
 
'''Appearance'''
 
 
 
:* Mowing cycles and litter pickup should be planned to provide a desirable appearance at all times and especially for the Memorial Day, July 4th and Labor Day holidays.
 
 
 
:* Coordination of the mowing effort is important not only between areas but between districts, also, to ensure that similar routes will present the same appearance at the same time.
 
 
 
:* The transition between mowing widths and patterns will vary and should be gradual to give a natural and pleasing appearance.
 
 
 
:* All required trimming should be completed with each mowing cycle.
 
 
 
:* Visible litter should be removed prior to and after each mowing cycle.
 
 
 
:* Landowners should be allowed to mow the right-of-way adjacent to their property if they feel it will enhance the appearance of their property.
 
 
 
'''Herbicides'''
 
 
 
:* [[:Category:821 Herbicides and Roadsides|821 Herbicides and Roadsides]] is used for guidelines for a herbicide program
 
 
 
:* Undesirable weeds should be controlled by either chemical or biological means.
 
 
 
:* An effective herbicide program is a strong part of a properly managed roadside.
 
 
 
:* Herbicides may be used to keep sidewalks, paved slopes, paved islands, paved shoulders, commuter parking lots, drains, pavement joints, barriers, curb lines, paved ditches, etc. free of vegetation.  If growth does occur in these areas, the vegetation should be removed.
 
 
 
:* Invasive plant species should be controlled that are considered mutually undesirable by MoDOT and adjacent landowners.
 
 
 
'''Cultural Practices'''
 
 
 
[[Image:822.6 Native Vegetation Preventing Snow Drifts.png|right| 200px|thumb|<center>'''Native Vegetation Preventing Snow Drifts'''</center>]]
 
 
 
:* Erosion control measures may be necessary if there is not adequate vegetation to prevent erosion or if operations require removal of vegetation and there is a possibility that silt will leave the right-of-way.
 
 
 
:* Fertilization and/or reseeding should be considered where difficulty in establishing vegetation is encountered.
 
 
 
:* Mowing height is the actual height of cut.
 
 
 
:* Do not mow when turf and soil conditions are wet to the point that turf damage or ruts will occur.
 
 
 
:* Native vegetation should be left standing and encouraged in areas that are prone to drifting snow.
 
 
 
:* Desirable trees and shrubs should be pruned to promote proper growth habit.
 
 
 
:* Delayed mowing allows for seed production that may result in healthier stands of turf.
 
 
 
'''Miscellaneous'''
 
 
 
:* Refer to your district roadside representative for assistance.
 
 
 
[[Image:822.6 Ditch Cut.png|right| 200px|thumb|<center>'''Ditch Cut'''</center>]]
 
 
 
:* When mowing to the ditch line, it is acceptable to make a 5 to 8 foot cut on the back side of a V-ditch to help maintain drainage if it can be accomplished without placing the tractor on a slope steeper than 3 to 1However, for appearance purposes, a cut on the backside of the ditch should not be made. A preferred alternative would be the selective use of herbicides.
 
 
 
:* Areas of wildflower, native grass and tree plantings may be signed to indicate what is being accomplished at these locations.
 
 
 
[[Category:822 Roadside Vegetation Management|822.06]]
 

Latest revision as of 12:29, 22 June 2011

This article has moved
EPG 822.6 Best Practices has been updated and moved to EPG 822.4 Best Practices. The content was updated to reflect Practical Operations.