Difference between revisions of "1059.4 Laboratory Testing Guidelines for Sec 1059"
(info from lab manual) |
m (Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | This article establishes procedures for testing and prequalification of protective coating material. Refer to [http://www.modot. | + | This article establishes procedures for testing and prequalification of protective coating material. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1059] for MoDOT’s specifications. |
==1059.4.1 Apparatus== | ==1059.4.1 Apparatus== | ||
| Line 10: | Line 10: | ||
==1059.4.3 Sample Record== | ==1059.4.3 Sample Record== | ||
| − | The sample record shall be completed in | + | The sample record shall be completed in AASHTOWARE Project (AWP), as described in [[:Category:101 Standard Forms#Sample Record, General|AWP MA Sample Record, General]], and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in [[106.20 Reporting|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab. |
[[Category:1059 Protective Coating Material]] | [[Category:1059 Protective Coating Material]] | ||
Latest revision as of 09:59, 14 September 2021
This article establishes procedures for testing and prequalification of protective coating material. Refer to Sec 1059 for MoDOT’s specifications.
1059.4.1 Apparatus
The apparatus shall be as designated in the test methods referred to for testing the particular type of material.
1059.4.2 Procedure
Follow the procedures for testing and prequalification of protective coating material called out in Sec 1059. The documentation furnished by the manufacturer shall be evaluated for compliance with Sec 1059.
1059.4.3 Sample Record
The sample record shall be completed in AASHTOWARE Project (AWP), as described in AWP MA Sample Record, General, and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.
