Difference between revisions of "Independent Assurance Samples and Tests"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (article construction)
 
m (→‎Guide Schedule for Independent Assurance Samples: Per Physical Lab, "Minimum Number of Tests" column removed.)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
==Guide Schedule for Independent Assurance Samples==
 
==Guide Schedule for Independent Assurance Samples==
 +
If a local public agency obtains funds from MoDOT and will use MoDOT QC/QA practices, they should follow the guidelines in the Independent Assurance Samples and Tests table AND follow the guidelines for Federal-Aid Acceptance Sampling and Testing (FAST) when using materials that do not have the contractor QC of the QC/QA program (Stabilized Permeable Base or Modified subgrade).
  
−
{| cellpadding="5" cellspacing="0"
 
−
|-
 
−
|rowspan="3" valign="top"|'''Legend :'''
 
−
|width="250"|FD = field
 
−
|width="250"|CL = Central Laboratory
 
−
|width="250"|BM = before mixing
 
−
|-
 
−
|width="250"|DL = district laboratory
 
−
|width="250"|AC = after compaction
 
−
|width="250"|BP = batch plant
 
−
|-
 
−
|width="250"|BC = before compaction
 
−
|}
 
  
−
 
+
{| border="1" cellpadding="5" cellspacing="0"  
−
 
+
|- style="background:#CCCCCC"
−
{| border="1" cellpadding="6" cellspacing="0" style="background:#cccccc"
+
! Type of Construction or Material || Tests to be Made (if specified) || Sampled ||Tested In||  Comparison Limits
−
|-style="background:#FFD700"
+
|-
−
!Type of Construction or Material || Tests to be made (if specified) || Sampled || Tested in || Minimum Number of Tests || Comparison Limits
+
|'''Grading - Embankment'''||align="center"| Density SAA003AA||align="center"| After compaction||align="center"| Field||Dry weight (mass) per cubic foot (meter) within 6% of the mean of the two tests.<sup>'''[[#footnotes|(2)]]'''</sup>
 
|-
 
|-
−
|Grading - Embankment
+
|'''Subgrade Preparation'''||align="center"| Density SAA003AA||align="center"| After compaction
−
|align="center"| Density SAA003AA
+
|align="center"| Field||Dry weight (mass) per cubic foot (meter) within 6% of mean of the two tests.<sup>[[#footnotes|'''(2)''']]</sup>  
−
|align="center"| AC
 
−
|align="center"| FD
 
−
|One per 3 miles (5 kilometers) or one per 2,000,000 cubic yards (1,500,000 cubic meters), whichever is greatest not including material to rocky to test.  None required if less than 10,000 cubic yards (8,000 cubic meters).
 
−
|Dry weight (mass) per cubic foot (meter) within 6% of the mean of the two tests.<sup> [[#footnotes|(2)]]</sup>
 
 
|-
 
|-
−
|Subgrade Preparation
+
|rowspan="3" valign="top"|'''Aggregate Base''' (Roadway and Shoulders)<sup> [[#footnotes|'''(1)''']]</sup>,
−
|align="center"| Density SAA003AA
 
−
|align="center"| AC
 
−
|align="center"| FD
 
−
|One per 3 miles (5 kilometers) or fraction thereof.  None required if less than 3/4 mile (1.2 kilometers).
 
−
|Dry weight (mass) per cubic foot (meter) within 6% of mean of the two tests.<sup>[[#footnotes|(2)]]</sup>
 
−
|-
 
−
|rowspan="3" valign="top"|Aggregate Base (Roadway and Shoulders)<sup> [[#footnotes|(1)]]</sup>,
 
  
−
Type 1, 5, or Stabilized Permeable Base,
+
'''Type 1, 5''' or '''Stabilized Permeable Base'''.
  
 
'''Note''': Gradation only for Stabilized Permeable base
 
'''Note''': Gradation only for Stabilized Permeable base
−
|align="center"| Density SAA003DA
+
|align="center"| Density SAA003DA||align="center"| After compaction||align="center"| Field||Dry weight (mass) per cubic foot (meter) within 6% of mean of the two tests.<sup> [[#footnotes|'''(2)''']]</sup>
−
|align="center"| AC
 
−
|align="center"| FD
 
−
|One per 13,500 tons (12,000 megagrams) or fraction thereof per specified gradation.  None required if less than 5,000 tons (4,500 megagrams) of a specified gradation.<sup>[[#footnotes|(3)]]</sup>
 
−
|Dry weight (mass) per cubic foot (meter) within 6% of mean of the two tests.<sup> [[#footnotes|(2)]]</sup>
 
 
|-
 
|-
−
|align="center"| Gradation SAA002EC SAA002GA SAA002HA
+
|align="center"| Gradation SAA002EC SAA002GA SAA002HA||align="center"| Before compaction||align="center"| Field, district laboratory||align="center"| 1/2 gradation range
−
|align="center"| BC
 
−
|align="center"| FD,DL
 
−
|One per 30,000 tons (27,000 megagrams) or fraction thereof per specified gradation.  None required if less than 5,000 tons (4,500 megagrams) of a specified gradation.<sup>[[#footnotes|(3)]]</sup>
 
−
|align="center"| 1/2 gradation range
 
 
|-
 
|-
−
|align="center"| PI included with gradation
+
|align="center"| PI included with gradation||align="center"| Before compaction||align="center"| Field, district laboratory||Within one (1) PI of their mean.
−
|align="center"| BC
 
−
|align="center"| FD, DL
 
−
|One per project per specified gradation, per source.  None required if less than 5,000 tons (4,500 megagrams) of a specified gradation.<sup> [[#footnotes|(4)]]</sup>
 
−
|Within one (1) PI of their mean.
 
 
|-
 
|-
−
|rowspan="4" valign="top"|Modified Subgrade (sand-soil base, soil-cement base or soil-lime base)
+
|rowspan="4" valign="top"|'''Modified Subgrade''' (sand-soil base, soil-cement base or soil-lime base)||align="center"| Gradation SAA002KA||align="center"| Before compaction||align="center"| Field, district laboratory||1/2 specification range.
−
|align="center"| Gradation SAA002KA
 
−
|align="center"| BC
 
−
|align="center"| FD, DL
 
−
|One per 55,000 square yards (46,000 square meters) or fraction thereof.  None required if less than 10,000 square yards (8,400 square meters).
 
−
|1/2 specification range.
 
 
|-
 
|-
−
|align="center"| Liquid Limit included with gradation.
+
|align="center"| Liquid Limit included with gradation.||align="center"| Before compaction||align="center"| Field, district laboratory||Within 13% of their mean.
−
|align="center"| BC
 
−
|align="center"| FD. DL
 
−
|One per 55,000 square yards (46,000 square meters) or fraction thereof.  None required if less than 10,000 square yards (8,400 square meters).
 
−
|Within 13% of their mean.
 
 
|-
 
|-
−
|align="center"| PI included with gradation.
+
|align="center"| PI included with gradation.||align="center"| Before compaction||align="center"| Field, district laboratory||Within one (1) PI of their mean.
−
|align="center"| BC
 
−
|align="center"| FD.DL
 
−
|One per 55,000 square yards (46,000 square meters) or fraction thereof.  None required if less than 10,000 square yards (8,400 square meters).
 
−
|Within one (1) PI of their mean.
 
 
|-
 
|-
−
|align="center"| Density SAA003AA
+
|align="center"| Density SAA003AA||align="center"| After compaction||align="center"| Field||Dry weight (mass) per cubic foot (meter) within 6% of the mean of the two tests.<sup>[[#footnotes|'''(2)''']]</sup>
−
|align="center"| AC
 
−
|align="center"| FD
 
−
|One per 55,000 square yards (46,000 square meters) or fraction thereof.  None required if less than 10,000 square yards (8,400 square meters).
 
−
|Dry weight (mass) per cubic foot (meter) within 6% of the mean of the two tests.<sup>[[#footnotes|(2)]]</sup>
 
 
|-
 
|-
−
|rowspan="3" valign="top"|Plant Mix Bit. base or Plant mix Bit. Pavement
+
|rowspan="3" valign="top"|'''Plant Mix Bit. Base''' or '''Plant Mix Bit. Pavement'''
  
 
or
 
or
  
−
Ultra-Thin Bonded Wearing Surface<sup>[[#footnotes|(9)]]</sup>
+
'''Ultra-Thin Bonded Wearing Surface'''<sup>[[#footnotes|'''(5)''']]</sup>
  
−
|align="center"| Gradation/Del. SAA002IF
+
|align="center"| Gradation/Del. SAA002IF||align="center"| Before mixing||align="center"| Field, district laboratory||1/2 specification range.
−
|align="center"| BM
 
−
|align="center"| FD,DL
 
−
|One per 10,000 tons (9,000 megagrams) or fraction thereof per type of construction.  None required if type of mixture is less than 1,000 tons (900 megagrams).
 
−
|1/2 specification range.
 
 
|-
 
|-
−
|align="center"| Density SAA003CA
+
|align="center"| Density SAA003CA||align="center"| After compaction||align="center"| District laboratory, Central Laboratory||Specific gravity within 2% of the mean of the two tests.
−
|align="center"| AC
 
−
|align="center"| DL, CL
 
−
|Two if over 10,000 tons (9,000 megagrams).  One if 1,000  to 10,000 tons (900 to 9,000 megagrams).  None required if less than 1,000 tons (900 megagrams).<sup>[[#footnotes|(8)]]</sup>
 
−
|Specific gravity within 2% of the mean of the two tests.
 
 
|-
 
|-
−
|align="center"| Asphalt Cement content by Nuclear Gauge SAA003ED
+
|align="center"| Asphalt Cement content by Nuclear Gauge SAA003ED||align="center"| Before compaction||align="center"| Field||align="center"| <sup>[[#ffotnotes|'''(3)''']]</sup>
−
|align="center"| BC
 
−
|align="center"| FD
 
−
|One per 10,000 tons (9,000 megagrams) or fraction thereof per type of construction.  None required if type of mixture is less than 1,000 tons (900 megagrams).
 
−
|<sup>[[#ffotnotes|(5)]]</sup>
 
 
|-
 
|-
−
|rowspan="6" valign="top"|Superpave Asphaltic Concrete Pavement
+
|rowspan="6" valign="top"|'''Superpave Asphaltic Concrete Pavement'''||align="center"| Gradation/Del.  SAA002IF||align="center"| Before mixing||align="center"| Field, district laboratory||1/2 specification range.
−
|align="center"| Gradation/Del.  SAA002IF
 
−
|align="center"| BM
 
−
|align="center"| FD, DL
 
−
|One per 30,000 tons (27,000 megagrams) or fraction thereof per type of construction.  None required if type of mixture is less than 1,000 tons (900 megagrams).<sup>[[#footnotes|(7)]]</sup>
 
−
|1/2 specification range.
 
 
|-
 
|-
−
|align="center"| Density
+
|align="center"| Density SAA024AB||align="center"| After compaction||align="center"| District laboratory, Central Laboratory||Specific gravity within 2% of the mean of the two tests.
−
 
 
−
SAA024AB
 
−
|align="center"| AC
 
−
|align="center"| DL, CL
 
−
|Two if over 10,000 tons (9,000 megagrams).  One if 1,000 to 10,000 tons (900 to 9,000 megagrams).  None required if less than 1,000 tons (900 megagrams).<sup>[[#footnotes|(8)]]</sup>
 
−
|Specific gravity within 2% of the mean of the two tests.
 
 
|-
 
|-
−
|align="center"| Maximum Specific Gravity
+
|align="center"| Maximum Specific Gravity SAA024AB||align="center"| Before compaction||align="center"| Field||Maximum specific gravity within 1% of the mean of the two tests.
−
 
 
−
SAA024AB
 
−
|align="center"| BC
 
−
|align="center"| FD
 
−
|Two if over 10,000 tons (9,000 megagrams).  One if 1,000 to 10,000 tons (900 to 9,000 megagrams).  None required if less than 1,000 tons (900 megagrams).<sup>[[#footnotes|(8)]]</sup>
 
−
|Maximum specific gravity within 1% of the mean of the two tests.
 
 
|-
 
|-
−
|align="center"| Volumetric (Sp. Gr. of gyratory compacted specimens)  SAA024AB
+
|align="center"| Volumetric (Sp. Gr. of gyratory compacted specimens)  SAA024AB||align="center"| Before compaction||align="center"| District laboratory, Central Laboratory||Specific gravity within 2% of the mean of the two tests.
−
|align="center"| BC
 
−
|align="center"| DL, CL
 
−
|Two if over 10,000 tons (9,000 megagrams).  One if 1,000 to 10,000 tons (900 to 9,000 megagrams).  None required if less than 1,000 tons (900 megagrams).<sup>[[#footnotes|(8)]]</sup>
 
−
|Specific gravity within 2% of the mean of the two tests.
 
 
|-
 
|-
−
|align="center"| Asphalt Cement Content by Nuclear gauge or Binder Ignition Oven  SAA024AB
+
|align="center"| Asphalt Cement Content by Nuclear gauge or Binder Ignition Oven  SAA024AB||align="center"| Before compaction||align="center"| Field||align="center"|<sup>[[#footnotes|'''(3)''']]</sup>
−
|align="center"| BC
 
−
|align="center"| FD
 
−
|Two if over 10,000 tons (9,000 megagrams).  One if 1,000 to 10,000 tons (900 to 9,000 megagrams).  None required if less than 1,000 tons (900 megagrams).<sup>[[#footnotes|(8)]]</sup>
 
−
|<sup>[[#footnotes|(5)]]</sup>
 
 
|-
 
|-
−
|align="center"| Gyratory Compactor
+
|align="center"| Gyratory Compactor||align="center"| Before compaction||align="center"| Field||align="center"|<sup>[[#footnotes|'''(4)''']]</sup>
−
|align="center"| BC
 
−
|align="center"| FD
 
−
|Two if over 10,000 tons (9,000 megagrams).  One if 1,000 to 10,000 tons (900 to 9,000 megagrams).  None required if less than 1,000 tons (900 megagrams).<sup>[[#footnotes|(8)]]</sup>
 
−
|<sup>[[#footnotes|(6)]]</sup>
 
 
|-
 
|-
−
|align="center"| Crushed Stone or Gravel Surfacing
+
|align="center"| '''Crushed Stone''' or '''Gravel Surfacing'''||align="center"| Gradation  SAA002VB||align="center"| -||align="center"| Field, district laboratory||1/2 specification range
−
|align="center"| Gradation  SAA002VB
 
−
|align="center"| -
 
−
|align="center"| FD, DL
 
−
|One per project.  None required if less than 1,000 tons (1,000 megagrams) or 750 cubic yards (575 cubic meters).
 
−
|1/2 specification range
 
 
|-
 
|-
−
|rowspan="7" valign="top"|PCC Pavement or PCC Base
+
|rowspan="7" valign="top"|'''PCC Pavement''' or '''PCC Base'''
  
 
(Full Depth, Unbonded Overlay, Bonded overlay and Whitetopping)
 
(Full Depth, Unbonded Overlay, Bonded overlay and Whitetopping)
  
−
|align="center"| Air Content  SAA502BA
+
|align="center"| Air Content  SAA502BA||align="center"| -||align="center"| Field||1-1/2%
−
|align="center"| -
 
−
|align="center"| FD
 
−
|One per 55,000 square yards (46,000 square meters) or fraction thereof per type of construction.  None required if type of construction is less than 5,000 square yards (4,200 square meters).<sup>[[#footnotes|(10)]]</sup>
 
−
|1-1/2%
 
 
|-
 
|-
−
|align="center"| Slump included with air
+
|align="center"| Slump included with air SAA502BA||align="center"| -||align="center"| Field||One inch (25mm)
−
 
 
−
SAA502BA
 
−
|align="center"| -
 
−
|align="center"| FD
 
−
|One per 55,000 square yards (46,000 square meters) or fraction thereof per type of construction.  None required if type of construction is less than 5,000 square yards (4,200 square meters).<sup>[[#footnotes|(10)]]</sup>
 
−
|One inch (25mm)
 
 
|-
 
|-
−
|align="center"| Pavement Thickness  SAA502AA
+
|align="center"| Pavement Thickness  SAA502AA||align="center"| -||align="center"| Field, district laboratory, Central Laboratory||align="center"|<sup>[[#footnotes|'''(6)''']]</sup>
−
|align="center"| -
 
−
|align="center"| FD, DL, CL
 
−
|Two if over 55,000 square yards (46,000 square meters).  One if 5,000 to 55,000 square yards (4,200 to 46,000 square meters).  None required if type of mixture is less than 5,000 square yards (4,200 square meters).<sup>[[#footnotes|(11)]]</sup>
 
−
|<sup>[[#footnotes|(12)]]</sup>
 
 
|-
 
|-
−
|align="center"| Compressive Strength  SAA502AA
+
|align="center"| Compressive Strength  SAA502AA||align="center"| -||align="center"| Field, district laboratory, Central Laboratory||align="center"|<sup>[[#footnotes|'''(7)''']]</sup>
−
|align="center"| -
 
−
|align="center"| FD, DL, CL
 
−
|Two if over 55,000 square yards (46,000 square meters).  One if 5,000 to 55,000 square yards (4,200 to 46,000 square meters).  None required if type of mixture is less than 5,000 square yards (4,200 square meters).<sup>[[#footnotes|(11)]]</sup>
 
−
|<sup>[[#footnotes|(13)]]</sup>
 
 
|-
 
|-
−
|align="center"| Gradation (Coarse Aggregate)
+
|align="center"| Gradation (Coarse Aggregate) SAA002JF or SAA002JE||align="center"| Batch plant||align="center"| Field, district laboratory||1/2 specification range
−
 
 
−
SAA002JF or SAA002JE
 
−
 
 
−
|align="center"| BP
 
−
|align="center"| FD, DL
 
−
|One per specified gradation.  None required if type of construction is less than 5,000 square yards (4,200 square meters).<sup>[[#footnotes|(14)]]</sup>
 
−
|1/2 specification range
 
 
|-
 
|-
−
|align="center"| Gradation (Fine Aggregate)
+
|align="center"| Gradation (Fine Aggregate) SAA002AC||align="center"| Batch plant||align="center"| Field, district laboratory||1/2 specification range
−
 
 
−
SAA002AC
 
−
 
 
−
|align="center"| BP
 
−
|align="center"| FD, DL
 
−
|One per specified gradation.  None required if type of construction is less than 5,000 square yards (4,200 square meters).<sup>[[#footnotes|(14)]]</sup>
 
−
|1/2 specification range
 
 
|-
 
|-
−
|align="center"| Deleterious (Coarse Aggregate) included with gradation
+
|align="center"| Deleterious (Coarse Aggregate) included with gradation||align="center"| Batch plant||align="center"| Field, district laboratory||1/2 specification range
−
|align="center"| BP
 
−
|align="center"| FD, DL
 
−
|One per specified gradation.  None required if type of construction is less than 5,000 square yards (4,200 square meters).<sup>[[#footnotes|(14)]]</sup>
 
−
|1/2 specification range
 
 
|-
 
|-
−
|rowspan="6" valign="top"|Concrete Masonry
+
|rowspan="6" valign="top"|'''Concrete Masonry'''(Structures)||align="center"| Air Content  SAE005CA (SAM005CA)||align="center"| -||align="center"| Field||1-1/2%
−
 
 
−
(Structures)
 
−
|align="center"| Air Content  SAE005CA (SAM005CA)
 
−
|align="center"| -
 
−
|align="center"| FD
 
−
|One per 500 cubic yards (400 cubic meters) or fraction therof per class of concrete.  None required if class of concrete is less than 150 cubic yards (125 cubic meters).
 
−
|1-1/2%
 
 
|-
 
|-
−
|align="center"| Slump included with air
+
|align="center"| Slump included with air||align="center"| -||align="center"| Field||One inch (25mm)
−
|align="center"| -
 
−
|align="center"| FD
 
−
|One per 500 cubic yards (400 cubic meters) or fraction therof per class of concrete.  None required if class of concrete is less than 150 cubic yards (125 cubic meters).
 
−
|one inch (25mm)
 
 
|-
 
|-
−
|align="center"| Compressive Strength  SAA599AB
+
|align="center"| Compressive Strength  SAA599AB||align="center"| -||align="center"| Central Laboratory||Mean of either set within 15% of the mean of both sets.
−
|align="center"| -
 
−
|align="center"| CL
 
−
|One per 500 cubic yards (400 cubic meters) or fraction therof per class of concrete.  None required if class of concrete is less than 150 cubic yards (125 cubic meters).
 
−
|Mean of either set within 15% of the mean of both sets.
 
 
|-
 
|-
−
|align="center"| Gradation (Coarse Aggregate)  SAA002JF
+
|align="center"| Gradation (Coarse Aggregate)  SAA002JF||align="center"| Batch plant||align="center"| Field, district laboratory||1/2 specification range.
−
|align="center"| BP
 
−
|align="center"| FD, DL
 
−
|One per specifed gradation per class of concrete.  None required if class of concrete is less than 150 cubic yards (125 cubic meters).
 
−
|1/2 specification range.
 
 
|-
 
|-
−
|align="center"| Gradation (Fine Aggregate)  SAA002AC
+
|align="center"| Gradation (Fine Aggregate)  SAA002AC||align="center"| Batch plant||align="center"| Field, district laboratory||1/2 specification range.
−
|align="center"| BP
 
−
|align="center"| FD, DL
 
−
|One per specifed gradation per class of concrete.  None required if class of concrete is less than 150 cubic yards (125 cubic meters).
 
−
|1/2 specification range.
 
 
|-
 
|-
−
|align="center"| Deleterious (Coarse Aggregate) included with the gradation
+
|align="center"| Deleterious (Coarse Aggregate) included with the gradation||align="center"| Batch plant||align="center"| Field, district laboratory||1/2 specification range.
−
|align="center"| BP
 
−
|align="center"| FD, DL
 
−
|One per specifed gradation per class of concrete.  None required if class of concrete is less than 150 cubic yards (125 cubic meters).
 
−
|1/2 specification range.
 
 
|}
 
|}
−
 
−
 
−
 
  
  
Line 257: Line 93:
 
'''FOOTNOTES'''
 
'''FOOTNOTES'''
  
−
1.  When aggregate base is shown in the contract to be measured and paid for by the area, convert the area to tons and follow the sampling frequency shown in this schedule.  When converting use the factor 0.06 ton/sq.yd./1" ((0.0028Mg/sq.m.) thichness.
+
1.  When aggregate base is shown in the contract to be measured and paid for by the area, convert the area to tons and follow the sampling frequency shown in this schedule.  When converting use the factor 0.06 ton/sq.yd./1 in. (0.0028 Mg/sq.m.) thickness.
  
 
2.  If nuclear method is used, observation only - no limits.
 
2.  If nuclear method is used, observation only - no limits.
  
−
3.  If one test required, test QA inspector.  If additional test required, perform approximately 75% of the test on the QC inspector and approximately 25% on the QA inspector.
+
3.  If nuclear method or binder ignition method used, observation only - no limits.
−
 
 
−
4.  Perform test on QA inspector.
 
−
 
 
−
5.  If nuclear method or binder ignition method used, observation only - no limits.
 
−
 
 
−
6.  If an approved gyratory compactor is used, observation only - no limits.
 
−
 
 
−
7.  If one test required, test QA inspector.  If additional tests required, perform approximately 75% of the test on the QC inspector and approximately 25% on the QA inspector.
 
−
 
 
−
8.  If one test required, test QA inspector.  If two tests required, test QC inspector once and QA inspector once.
 
−
 
 
−
9.  Density test not applicable for Ultra-Thin Bonded Wearing Surface.
 
−
 
 
−
10.  If one test required, test QA inspector.  If additional test required, perform approximately 75% of the test on the QC inspector and 25% on the QA inspector.
 
  
−
11.  If one test required, test QA inspector.  If two tests required, test QC inspector once and QA inspector once.
+
4.  If an approved gyratory compactor is used, observation only - no limits.
  
−
12.  If an approved height measuring device is used, observation only - no limits.
+
5.  Density test not applicable for Ultra-Thin Bonded Wearing Surface.
  
−
13.  If an approved compression machine is used, observation only - no limits.
+
6.  If an approved height measuring device is used, observation only - no limits.
  
−
14.  Test QA inspector.
+
7.  If an approved compression machine is used, observation only - no limits.

Latest revision as of 11:42, 21 March 2011

Guide Schedule for Independent Assurance Samples

If a local public agency obtains funds from MoDOT and will use MoDOT QC/QA practices, they should follow the guidelines in the Independent Assurance Samples and Tests table AND follow the guidelines for Federal-Aid Acceptance Sampling and Testing (FAST) when using materials that do not have the contractor QC of the QC/QA program (Stabilized Permeable Base or Modified subgrade).


Type of Construction or Material Tests to be Made (if specified) Sampled Tested In Comparison Limits
Grading - Embankment Density SAA003AA After compaction Field Dry weight (mass) per cubic foot (meter) within 6% of the mean of the two tests.(2)
Subgrade Preparation Density SAA003AA After compaction Field Dry weight (mass) per cubic foot (meter) within 6% of mean of the two tests.(2)
Aggregate Base (Roadway and Shoulders) (1),

Type 1, 5 or Stabilized Permeable Base.

Note: Gradation only for Stabilized Permeable base

Density SAA003DA After compaction Field Dry weight (mass) per cubic foot (meter) within 6% of mean of the two tests. (2)
Gradation SAA002EC SAA002GA SAA002HA Before compaction Field, district laboratory 1/2 gradation range
PI included with gradation Before compaction Field, district laboratory Within one (1) PI of their mean.
Modified Subgrade (sand-soil base, soil-cement base or soil-lime base) Gradation SAA002KA Before compaction Field, district laboratory 1/2 specification range.
Liquid Limit included with gradation. Before compaction Field, district laboratory Within 13% of their mean.
PI included with gradation. Before compaction Field, district laboratory Within one (1) PI of their mean.
Density SAA003AA After compaction Field Dry weight (mass) per cubic foot (meter) within 6% of the mean of the two tests.(2)
Plant Mix Bit. Base or Plant Mix Bit. Pavement

or

Ultra-Thin Bonded Wearing Surface(5)

Gradation/Del. SAA002IF Before mixing Field, district laboratory 1/2 specification range.
Density SAA003CA After compaction District laboratory, Central Laboratory Specific gravity within 2% of the mean of the two tests.
Asphalt Cement content by Nuclear Gauge SAA003ED Before compaction Field (3)
Superpave Asphaltic Concrete Pavement Gradation/Del. SAA002IF Before mixing Field, district laboratory 1/2 specification range.
Density SAA024AB After compaction District laboratory, Central Laboratory Specific gravity within 2% of the mean of the two tests.
Maximum Specific Gravity SAA024AB Before compaction Field Maximum specific gravity within 1% of the mean of the two tests.
Volumetric (Sp. Gr. of gyratory compacted specimens) SAA024AB Before compaction District laboratory, Central Laboratory Specific gravity within 2% of the mean of the two tests.
Asphalt Cement Content by Nuclear gauge or Binder Ignition Oven SAA024AB Before compaction Field (3)
Gyratory Compactor Before compaction Field (4)
Crushed Stone or Gravel Surfacing Gradation SAA002VB - Field, district laboratory 1/2 specification range
PCC Pavement or PCC Base

(Full Depth, Unbonded Overlay, Bonded overlay and Whitetopping)

Air Content SAA502BA - Field 1-1/2%
Slump included with air SAA502BA - Field One inch (25mm)
Pavement Thickness SAA502AA - Field, district laboratory, Central Laboratory (6)
Compressive Strength SAA502AA - Field, district laboratory, Central Laboratory (7)
Gradation (Coarse Aggregate) SAA002JF or SAA002JE Batch plant Field, district laboratory 1/2 specification range
Gradation (Fine Aggregate) SAA002AC Batch plant Field, district laboratory 1/2 specification range
Deleterious (Coarse Aggregate) included with gradation Batch plant Field, district laboratory 1/2 specification range
Concrete Masonry(Structures) Air Content SAE005CA (SAM005CA) - Field 1-1/2%
Slump included with air - Field One inch (25mm)
Compressive Strength SAA599AB - Central Laboratory Mean of either set within 15% of the mean of both sets.
Gradation (Coarse Aggregate) SAA002JF Batch plant Field, district laboratory 1/2 specification range.
Gradation (Fine Aggregate) SAA002AC Batch plant Field, district laboratory 1/2 specification range.
Deleterious (Coarse Aggregate) included with the gradation Batch plant Field, district laboratory 1/2 specification range.


FOOTNOTES

1. When aggregate base is shown in the contract to be measured and paid for by the area, convert the area to tons and follow the sampling frequency shown in this schedule. When converting use the factor 0.06 ton/sq.yd./1 in. (0.0028 Mg/sq.m.) thickness.

2. If nuclear method is used, observation only - no limits.

3. If nuclear method or binder ignition method used, observation only - no limits.

4. If an approved gyratory compactor is used, observation only - no limits.

5. Density test not applicable for Ultra-Thin Bonded Wearing Surface.

6. If an approved height measuring device is used, observation only - no limits.

7. If an approved compression machine is used, observation only - no limits.

Retrieved from "https://epg.modot.org/index.php?title=Independent_Assurance_Samples_and_Tests&oldid=25335"