User:Hoskir/Revision Request 4307: Difference between revisions
| (2 intermediate revisions by the same user not shown) | |||
| Line 76: | Line 76: | ||
* Principal Arterial | * Principal Arterial | ||
Minor route functional classifications (see | Minor route functional classifications (see [[EPG 232.1.3]]) include the following: | ||
* Minor Arterial | * Minor Arterial | ||
| Line 82: | Line 82: | ||
* Minor Collector | * Minor Collector | ||
The following context classifications (see | The following context classifications (see [[EPG 232.1.4]]) are used by MoDOT: | ||
* Rural | * Rural | ||
| Line 98: | Line 98: | ||
This section provides guidance on spacing between intersections and accesses to support safe and efficient roadway operations. | This section provides guidance on spacing between intersections and accesses to support safe and efficient roadway operations. | ||
940.2.1 Intersection Functional Area | |||
EPG 940.2.1 consists of guidance provided in the second edition of the Access Management Manual published by the Transportation Research Board of the National Academies. | ==940.2.1 Intersection Functional Area== | ||
EPG 940.2.1 consists of guidance provided in the second edition of the Access Management Manual published by the Transportation Research Board of the National Academies. | |||
The functional area of an intersection includes any area upstream or downstream of an intersection where intersection operation and conflicts significantly influence driver behavior, vehicle operations, or traffic conditions. As such, other intersections or accesses within the upstream or downstream functional areas should be avoided. Although the intersection depicted in Figure 940.2.1 is a typical at-grade intersection, the concept of functional intersection area applies to stop-controlled intersections, signalized intersections, and roundabouts. | The functional area of an intersection includes any area upstream or downstream of an intersection where intersection operation and conflicts significantly influence driver behavior, vehicle operations, or traffic conditions. As such, other intersections or accesses within the upstream or downstream functional areas should be avoided. Although the intersection depicted in Figure 940.2.1 is a typical at-grade intersection, the concept of functional intersection area applies to stop-controlled intersections, signalized intersections, and roundabouts. | ||
Figure 940.2.1 Intersection Functional Area | [[File:fig_940.2.1.png|center|thumb|700px|<center>'''Figure 940.2.1 Intersection Functional Area'''</center>]] | ||
940.2.1.1 Upstream Functional Distance | |||
===940.2.1.1 Upstream Functional Distance=== | |||
The upstream functional distance of an intersection consists of three elements: | The upstream functional distance of an intersection consists of three elements: | ||
* Distance traveled during a perception reaction time, | |||
* Deceleration distance while the driver maneuvers to stop, and | |||
940.2.1.2 Distance Traveled During Perception-Reaction Time and Deceleration Maneuver | * Queue storage | ||
Perception-reaction distance represents the distance traveled while a driver detects a condition requiring action, perceives the need to respond, and initiates braking. This distance is influenced by factors such as driver alertness, familiarity with the roadway, and traffic conditions. Once a driver reacts, additional distance is needed to decelerate to a stop. These values are shown in Table 940.2.1.2. | |||
Table 940.2.1.2 Perception-Reaction plus Deceleration Distance | ===940.2.1.2 Distance Traveled During Perception-Reaction Time and Deceleration Maneuver=== | ||
Speed (mph) Perception-Reaction Distance plus Deceleration Distance (feet) | |||
25 170 | Perception-reaction distance represents the distance traveled while a driver detects a condition requiring action, perceives the need to respond, and initiates braking. This distance is influenced by factors such as driver alertness, familiarity with the roadway, and traffic conditions. Once a driver reacts, additional distance is needed to decelerate to a stop. These values are shown in [[#tab940.2.1.2|Table 940.2.1.2]]. | ||
30 220 | |||
35 290 | {| id="tab940.2.1.2" class="wikitable" style="text-align:center; margin: 0 auto;" | ||
40 360 | |+ '''Table 940.2.1.2 Perception-Reaction plus Deceleration Distance''' | ||
45 435 | |- | ||
50 520 | ! Speed (mph) !! Perception-Reaction Distance plus Deceleration Distance (feet) | ||
55 615 | |- | ||
60 715 | | 25 || 170 | ||
65 825 | |- | ||
Note: Distances rounded to 5 ft | | 30 || 220 | ||
|- | |||
| 35 || 290 | |||
|- | |||
| 40 || 360 | |||
|- | |||
| 45 || 435 | |||
|- | |||
| 50 || 520 | |||
|- | |||
| 55 || 615 | |||
|- | |||
| 60 || 715 | |||
|- | |||
| 65 || 825 | |||
|- | |||
| colspan="2" style="text-align:left" | Note: Distances rounded to 5 ft. | |||
|} | |||
940.2.1.3 Queue Storage | 940.2.1.3 Queue Storage | ||
At a minimum, queue storage is assumed to be 50 feet for any controlled movement for lower volume movements with less than 50 vehicles in a peak hour. Where traffic volumes are more significant, queue storage can be calculated using the information included in EPG 905.3.5 Traffic Analysis Tools. | At a minimum, queue storage is assumed to be 50 feet for any controlled movement for lower volume movements with less than 50 vehicles in a peak hour. Where traffic volumes are more significant, queue storage can be calculated using the information included in EPG 905.3.5 Traffic Analysis Tools. | ||
Latest revision as of 09:50, 18 November 2026
1
Replace all of EPG Category:940 Access Management and create pages for each article
| Additional Resources |
| ● MHTC Policy about Limited Access Roadways - Delegation of Authority |
| ● MHTC Policy about Limited Access Roadways – Execution of Documents |
| Additional Information |
| ● Managing Access to Missouri's Highways |

Roadways should provide efficient and reasonably safe access to homes and businesses. This concept is the foundation of any successful access management effort. Economic prosperity for businesses of all sizes is dependent upon the appropriate level of access and is an important consideration in determining where access should be restricted and/or limited.
Local and lower-volume routes provide access to homes and businesses while higher-volume arterial routes like interstates and major highways are needed to serve longer, higher-speed travel. The more traffic on a roadway, the more essential access management becomes. Properly managed access provides access to homes and businesses while still improving roadway safety and traffic operations and protecting the taxpayers’ investment in roadways. In order to be successful in managing access, MoDOT works to gain the cooperation and support of affected communities, business owners, and the public.
| Benefits of Effective Roadway Access Management |
|---|
| Effective access management helps preserve the function and character of major highway corridors. Thoughtful access planning provides the following social, economic, and environmental benefits: |
| ● Fewer vehicular crashes |
| ● Safer travel for pedestrians and cyclists |
| ● Sustained highway efficiency and reliable travel |
| ● More attractive, coordinated commercial development |
| ● Protection and enhancement of scenic landscapes |
| ● Less cut-through traffic in residential neighborhoods through well-functioning arterials |
| ● Greater stability for homes and businesses by reducing the need for repeated roadway widening |
| ● Shorter, more reliable commutes with lower fuel consumption and vehicle emissions through coordinated driveways and traffic signals |
| Effective access management creates lasting value for government agencies, the public, and corridor businesses. Well-spaced, thoughtfully designed driveways make it easier for customers to enter and exit businesses safely, while coordinated access near intersections helps keep entrances clear of queuing traffic. Attractive corridors with safe, convenient access support existing businesses, encourage new investment, and enhance the customer experience. Over time, these improvements strengthen established commercial areas, support continued reinvestment, and help corridors remain safe, efficient, and economically vibrant. |
2
Create page for 940.1 Principles of Access Management
The purpose of access management is to provide vehicular access to land development in a manner that preserves the safety and efficiency of the transportation system. The practice of access management extends the concept of access design and location control to all highways — not just controlled-access highways or freeways.
In cases where the access management criteria cannot be met, a detailed analysis is to be performed to determine the optimum solution. Flexibility, good judgment, negotiation and compromise will be necessary to determine the right solution for each location. See EPG 940.2.2 for information on the variance process.

Successful access management often involves a partnership between MoDOT and local jurisdictions. Districts are to establish mutually beneficial and cooperative relationships with city and county stakeholders. Local governments can help MoDOT manage on-site issues that influence the operation of the highway system that occur beyond MoDOT right of way.
The functional role of a roadway is defined by the balance between access and mobility. Mobility reflects a roadway’s ability to efficiently move traffic through an area, while accessibility relates to providing connections to adjacent land uses. As illustrated in the figure below, these two functions are inversely related, with different roadway classifications placing varying levels of emphasis on mobility and access. Local roads primarily serve land access needs, arterials prioritize the movement of through traffic, and collectors provide a balance between accessibility and mobility.

Routes classified as interstate/freeway are intended to carry long-distance, higher-speed travel and will have a high level of access control. Interchanges are to be spaced to allow smooth and safe flow of traffic entering and exiting the freeway. All interchange spacing decisions are to be supported by safety and operational analyses. Connectivity with the local street system, speed and safety will also be considered. See EPG 234.1 Interchange Design for information related to interchange spacing.
MoDOT uses roadway functional classification and context classification to determine project eligibility, planning priorities, and design criteria. For many applications, the MoDOT system is primarily divided between major and minor route classifications.
Major route functional classifications (see EPG 232.1.2) include the following:
- Interstate
- Freeway
- Expressway
- Principal Arterial
Minor route functional classifications (see EPG 232.1.3) include the following:
- Minor Arterial
- Major Collector
- Minor Collector
The following context classifications (see EPG 232.1.4) are used by MoDOT:
- Rural
- Suburban
- Urban
On major freeway routes, the spacing of the outer road from the ramp should allow traffic adequate room to exit the ramp, (freeway and expressway transition), without negatively impacting the operation of the interchange and freeway.
On major non-freeway routes, median opening spacing, public road intersections and traffic signals are important considerations in managing access. Routes classified as minor arterials and collectors make up the bulk of MoDOT’s system, serve more local destination traffic and have a lower level of access control.
3
Create page for 940.2 Intersections
This section provides guidance on spacing between intersections and accesses to support safe and efficient roadway operations.
940.2.1 Intersection Functional Area
EPG 940.2.1 consists of guidance provided in the second edition of the Access Management Manual published by the Transportation Research Board of the National Academies.
The functional area of an intersection includes any area upstream or downstream of an intersection where intersection operation and conflicts significantly influence driver behavior, vehicle operations, or traffic conditions. As such, other intersections or accesses within the upstream or downstream functional areas should be avoided. Although the intersection depicted in Figure 940.2.1 is a typical at-grade intersection, the concept of functional intersection area applies to stop-controlled intersections, signalized intersections, and roundabouts.

940.2.1.1 Upstream Functional Distance
The upstream functional distance of an intersection consists of three elements:
- Distance traveled during a perception reaction time,
- Deceleration distance while the driver maneuvers to stop, and
- Queue storage
940.2.1.2 Distance Traveled During Perception-Reaction Time and Deceleration Maneuver
Perception-reaction distance represents the distance traveled while a driver detects a condition requiring action, perceives the need to respond, and initiates braking. This distance is influenced by factors such as driver alertness, familiarity with the roadway, and traffic conditions. Once a driver reacts, additional distance is needed to decelerate to a stop. These values are shown in Table 940.2.1.2.
| Speed (mph) | Perception-Reaction Distance plus Deceleration Distance (feet) |
|---|---|
| 25 | 170 |
| 30 | 220 |
| 35 | 290 |
| 40 | 360 |
| 45 | 435 |
| 50 | 520 |
| 55 | 615 |
| 60 | 715 |
| 65 | 825 |
| Note: Distances rounded to 5 ft. | |
940.2.1.3 Queue Storage At a minimum, queue storage is assumed to be 50 feet for any controlled movement for lower volume movements with less than 50 vehicles in a peak hour. Where traffic volumes are more significant, queue storage can be calculated using the information included in EPG 905.3.5 Traffic Analysis Tools. 940.2.1.4 Downstream Functional Distance The functional distance of an intersection extends some distance downstream from the intersection to allow drivers to clear the intersection before responding to vehicles entering or leaving the roadway. Downstream function distance based on stopping sight distances are shown in Table 940.2.1.4. Table 940.2.1.4 Downstream Functional Distance Speed (mph) Downstream Functional Distance (feet) 25 155 30 200 35 250 40 305 45 360 50 425 55 495 60 570 65 645 940.2.2 Access Spacing This guideline provides for adequate spacing between intersections and access points. Major roadways are mainly intended to serve through traffic and are to have intersections that are spaced farther apart. Minor roadways provide some service to through traffic but also provide direct access to property; therefore, they can be placed closer together. See EPG 232.1.2 for major route functional classifications and EPG 232.1.3 for minor route functional classifications. Appropriate signal spacing is needed to preserve efficient traffic flow and progression on urban arterial roadways; for instance, a quarter- or half-mile spacing allows traffic signals to be effectively interconnected and synchronized. Adequate spacing will also tend to reduce rear-end collisions and “stop and go” driving that increases congestion, delay and air pollution.
Figure 940.2.2 Access Spacing
Table 940.2.2 Access Spacing Guidelines
Functional Class Area Posted Speed (mph) Connection/Driveway Spacing (ft)* Signalized Unsignalized Left-In / Right-In / Right-Out (Directional Median) Right-In / Right-Out (Non-Traversable Median) Interstate na Freeway na Expressway and Other Principal Arterial Rural >45 5,280** 2,640 1,320 1,320 ≤45 2,640 1,320 660 660 Urban >45 2,640** 1,320 660 660 ≤45 1,320 660 660 330 Minor Arterial Rural >45 5,280** 2,640 1,320 1,320 ≤45 2,640 1,320 660 660 Urban >45 2,640** 1,320 660 660 ≤45 1,320 660 660 330 Major Collector Rural >45 5,280** 2,640 660 440 ≤45 2,640 1,320 660 330 Urban >45 2,640** 1,320 660 440 35-45 1,320 660 660 330 <35 1,320 330 660 220 Minor Collector Rural >45 5,280** 2,640 660 440 ≤45 2,640 1,320 660 330 Urban >45 2,640** 1,320 660 440 35-45 1,320 660 660 330 ≤35 1,320 330 660 220
- Measured from centerline to centerline of intersecting streets or driveways
- Alternatives to traffic signals should be evaluated prior to installing a new traffic signal where speeds exceed 45 mph.
Note: na = not applicable Note: The spacing for Left-In / Right-In / Right-Out connections allows for left-turn lanes and an appropriate taper to be constructed between intersections. Note: The spacing for Right-In / Right-Out connections is based on the functional area of the intersection. Adequate spacing from adjacent intersection functional areas will need to be verified for each proposed access. An access may be permitted even if it does not meet the minimum spacings listed in Table 940.2.2. If the minimum spacing cannot be met, all efforts should be made to share access with an adjacent property or consolidate other accesses to improve access spacing. Minimum sight distance (see EPG 941.7) must be provided at all accesses. If a variance of the minimum access spacing is requested, a traffic impact study (see EPG 941.8) should be submitted to district permit staff. Staff will review the following information when considering a variance request: • Intersection sight distance measurements from the proposed access location (see EPG 941.7) • Functional area of upstream and downstream intersections (see EPG 940.2.2) • Anticipated daily traffic volume at the access • Crash experience near the proposed access location • Are there opportunities to share access with adjacent property owners? • Is the access located on the subject property in a location that is as far as possible from other driveways or intersections? 940.2.3 Access Spacing in Interchange Area EPG 940.2.3 consists of guidance provided in the second edition of the Access Management Manual published by the Transportation Research Board of the National Academies. Access connections in the vicinity of an interchange present unique challenges, especially when traffic volumes are moderate to high. Guidelines for the effective access management of interchange areas can help optimize the spacing, location, and design of access facilities. There are several critical locations downstream of an off-ramp. These locations include: • The first driveway after an interchange off-ramp terminal, • The first unsignalized crossroad intersection after an interchange off-ramp terminal, • The first median opening after an interchange off-ramp terminal, and • The first signalized crossroad intersection after an interchange off-ramp terminal or the closest access drive. A similar set of critical access points needs to be considered upstream of interchange on-ramp terminal locations. The nature of traffic control (uninterrupted flow, interrupted flow, and roundabouts) for the ramp terminal directly influences location and spacing guidelines.
Figure 940.2.3 Access Spacing in Interchange Area If the distances shown on Figure 940.2.3 cannot be met, all reasonable alternatives, including relocating the access to a different location, are to be considered. Other alternatives to be examined may include installation of raised medians, construction of a single point urban interchange, the use of roundabouts at the ramp and or outer road intersections or alternative access ways such as frontage and backage roads.
940.3 Driveways
This guideline includes several considerations for driveways which are described in more detail in other sections of the EPG. Driveway design information is included in EPG 233.1.3. 940.3.1 Driveway Spacing Driveway spacing is an important consideration for access management. Driveway spacing guidelines follow the access guidelines in EPG 940.2.2. 940.3.2 Driveway Corner Clearance Driveways should be located outside of the functional area of an intersection. See EPG 940.2.1 for information on intersection functional area. 940.3.3 Driveway Throat Length A driveway’s throat length is the distance along a driveway from the intersecting roadway to the first location on a site where a driver can make a turn. Throat length guidelines are provided in EPG 233.1.3.7.
940.4 Medians
Raised medians are an effective access management strategy on high-volume urban routes. Roadways with raised medians have fewer conflict points than undivided sections. In general, the use of raised medians should be considered where there is a presence of vulnerable road users, and the traffic volume is greater than 9,000 vehicles per day. If there is no presence of vulnerable road users, the use of raised medians should be considered where the traffic volume is greater than 12,000 vehicles per day and are recommended where traffic volumes exceed 28,000 vehicles per day Raised medians are especially recommended in corridors where the traffic volume is high, the density of commercial driveways is high (over 20 -30 per mile in both directions), and other access management strategies such as driveway consolidation and corner clearance are not practical. Raised medians are to be used on arterial facilities with three or more through traffic lanes in each direction. 940.4.1 Median Width Median width information is included in EPG 231.1. 940.4.2 Median Opening Spacing Openings in raised medians are only to accommodate turning traffic in locations where this can be safely done. Where openings are provided, an adequate spacing between them is necessary to allow for weaving of traffic to preserve traffic flow and provide for safe lane changes and turns. A full opening allows turns to be made in both directions; a directional opening allows turns to be made in only one direction. An example of a directional median would be one that allows left turns into a driveway but does not allow left turns to be made out.
Figure 940.4.2 Median Opening Spacing Median openings are not to be allowed under the following circumstances: • On interstates or other freeways • Within the functional area of an intersection • At locations that have higher crash rates • At locations with inadequate sight distance Traffic studies should indicate the length of queue storage needed for major traffic generators such as a shopping mall, school, stadium, or industrial plant. In cases where left turns are restricted by lack of median openings, safe U-turns may be allowed. U-turns can be safely accommodated through a variety of means, including signal phasing and timing, widening and including physical design features such as turning lanes and “jug handles.” U-turns are to be prohibited if they cannot be made safely. U-turn opportunities are to be designed with an appropriate typical design vehicle. See EPG Table 940.2.2 for minimum spacing guidelines.
940.5 Auxiliary Turn Lane Warrants
Auxiliary left- and right-turn lanes are intended to remove turning vehicles from the through traffic flow. This reduces the frequency of rear-end collisions at locations where there is considerable left- and right-turn ingress activity, such as major driveways and minor public road intersections. Left-turn lane warrants are shown in the figures in EPG 940.5.1, and right-turn lane warrants are shown in the figures in EPG 940.5.2. To use the figures, peak hour traffic counts including directional splits, which may be obtained from district Traffic staff, will be required. In addition, the ITE Trip Generation Manual may be used as an estimate for peak hour traffic counts. Transportation Planning can provide necessary growth rates for design year analyses. The use and design of auxiliary left- and right-turn lanes are to be guided by a traffic study. In general, auxiliary left- and right-turn lanes should be long enough to accommodate a safe deceleration distance and provide adequate storage for an expected peak hour turning traffic queue. Refer to storage and deceleration lengths for additional information (see EPG 233.2.15 and EPG 233.2.16). 940.5.1 Left-Turn Lane Warrants Dedicated left-turn lanes are to be provided in situations where traffic volumes and speeds are relatively high and conflicts are likely to develop at public road intersections and driveways between through and turning traffic. The following data are required for left-turn lane warrants on two-lane roads: 1. Opposing Volume (veh/hr) - VO - The opposing volume is to include only the right-turn and through movements in the opposite direction of the left turning vehicle. 2. Advancing Volume (veh/hr) - VA - The advancing volume is to include the right-turn, left-turn and through movements in the same direction as the left-turning vehicle. 3. Operating Speed (mph) - The greatest of anticipated operating speed, measured 85th percentile speed or posted speed. 4. Percentage of left turns in VA Left turn lane is not needed for left turn volume less than 10 vph. However, criteria other than volume, such as crash experience, may be used to justify a left-turn lane. The appropriate trend line is identified on the basis of the percentage of left-turns in the advancing volume, rounded up to the nearest percentage trend line. If the advancing and opposing volume combination intersects above or to the right of this trend line, a left-turn lane is appropriate.
Figure 940.5.1.1 Left Turn Lane Guidelines for Two-Lane Road less than or equal to 40 mph
Figure 940.5.1.2 Left Turn Lane Guidelines for Two-Lane Roads, 45 mph
Figure 940.5.1.3 Left Turn Lane Guideline for Two-Lane Road, 50 mph
Figure 940.5.1.4 Left Turn Lane Guidelines for Two-Lane Road, 55 mph
Figure 940.5.1.5 Left Turn Lane Guidelines for Two-Lane Road, >= 60 mph
The following data are required for left-turn lanes on four-lane undivided roadways:
1. Opposing Volume (veh/hr) - VO - The opposing volume is to include only the right-turn and through movements in the opposite direction of the left turning vehicle. 2. Left-Turn Volume – VL If the opposing and left-turn volume combination intersects above or to the right of the trend line, a left-turn lane is appropriate.
Figure 940.5.1.6 Left Turn Lane Guidelines for Four-Lane Undivided Roadways For left-turn lane guidelines on four-lane divided roadways, see EPG 233.2.2. 940.5.2 Right-Turn Lane Warrants The use of dedicated right-turn lanes should also be guided by a traffic study. In general, dedicated right-turn lanes should be provided in both rural and urban areas on two lane routes as shown in the figures below. Right-turn lane warrants are shown in the following figures. To use the figures, peak hour traffic counts, including directional splits, will be required, which may be obtained from district Traffic staff. In addition, the ITE Trip Generation Manual may be used as an estimate for peak hour traffic counts. Planning can provide necessary growth rates for design year analyses. Dedicated right turn lanes are also to be strongly considered in situations where: • Poor internal site design and circulation leads to backups on the mainline. Auto-oriented businesses with short drive-through lanes or poorly designed parking lots would be prime examples of this situation. • The peak hour turning traffic activity is unusually high (e.g. greater than 10 percent of the daily total). • Operating speeds on the mainline route are very high (greater than 60 miles per hour) and drivers would generally not expect right turns. • The driveway or minor public road intersection is difficult for drivers to see. • The driveway entrance is gated or otherwise must be entered very slowly. • Right turning traffic consists of an unusually high number of trailers or other large vehicles. • The intersection or driveway angle is highly skewed. • Rear end collision experience is unusually high at a location. As with any auxiliary turning lane, dedicated right-turn lanes are to be designed based on the results of a traffic study. The following data are required: 1. Advancing Volume (veh/hr) - The advancing volume is to include the right-turn, left-turn and through movements in the same direction as the right turning vehicle. 2. Right Turning Volume (veh/hr) - The right turning volume is the number of advancing vehicles turning right. 3. Operating Speed (mph) - The greatest of anticipated operating speed, measured 85th percentile speed or posted speed. Note: Right turn lane is not needed for right turn volume less than 10 vph. However, criteria other than volume, e.g. crash experience, may be used to justify a right turn lane. If the combination of major road approach volume and right-turn volume intersects above or to the right of the speed trend line corresponding to the major road operating speed, then a right-turn lane is appropriate.
Figure 940.5.2.1 Right Turn Lane Guidelines for Two-Lane Roadways
Figure 940.5.2.2 Right Turn Lane Guidelines for Four-Lane Roadways
940.5.3 Two-Way Left-Turn Lanes A two-way left-turn lane (TWLTL) may be an effective access management tool when used with other techniques such as driveway consolidation. TWLTLs may be appropriate for the following roadways: • Roadways in urban and suburban areas with a projected average daily traffic of fewer than 24,000 AADT, • Collector streets in developing residential areas in which residences front onto local streets that intersect with the collector street, • Collector streets in developing suburban areas on which direct access is to be provided to small abutting properties, and • Collector streets in developed urban and suburban areas on which there is no crash pattern that would be correctable by a raised-curb median. TWLTLs may be inappropriate where the commercial driveway density is above the driveway spacing guideline. Research indicates that when commercial driveway density is over 24 per mile (12 per mile in each direction), crash rates increase significantly. This roughly equates to an average driveway spacing of 440 ft. TWLTL configurations are not recommended along high traffic volume (over 24,000 AADT) urban and suburban routes. Roadways with raised medians have fewer conflict points than undivided sections. TWLTL configurations are not to be used on facilities with more than four through-traffic lanes, e.g., to create a “seven lane” facility. Crash experience with such large roadway cross-sections is poor.
Figure 940.5.3 Two-Way Left-Turn Lane
940.6 Network Considerations
Roadway networks can contribute to the success of an access management program. Access types should be located on the appropriate roadway based on functional classification, speed, design criteria, and other general characteristics of a roadway. Frontage and backage roads reduce conflict points between through traffic and turning traffic associated with strip development and direct property access to the arterial. Roadways that function as both a Freeway and as an Expressway must receive careful consideration through the transition areas between the two functional classifications. 940.6.1 Frontage and Backage Roads Frontage and backage roads provide alternative access to property and help remove turning traffic from the through traffic on a mainline route. A frontage road provides alternative access at the front of properties while a backage road provides alternative access at the rear of properties. Frontage and backage roads can dramatically improve safety and operations. However, a common mistake involves placing frontage or backage roads in close proximity to the mainline. Placing frontage roads very close to mainline roads can create additional opportunities for delay, congestion and crashes because insufficient storage (“throat length”) is provided for entering and exiting vehicles.
Figure 940.6.1 Frontage and Backage Roads Backage roads are more advantageous than frontage roads because they minimize visual distractions and headlight glare on both the mainline and backage road. The backage configuration is particularly conducive to ownership by other governmental entities. Frontage roads may be more appropriate on freeways, especially those where MoDOT will maintain and operate the outer road system.
940.6.2 Freeway and Expressway Transition
Some major roads consist of a mixture of freeway (with grade-separated interchanges and no driveway accesses) and expressways (with at grade public road intersections and driveways). The transition between freeway and expressway must be carefully planned so drivers are well aware that a change in the access character of the roadway has occurred. As shown in Figure 904.6.2, a minimum distance of ½ mile (2,640 feet) should be provided between an interchange and the first at-grade intersection in urban and suburban areas, while a minimum distance of 1 mile (5,280 feet) should be provided in rural areas. A traffic study should evaluate potential queue interactions and confirm that sufficient distance is available for necessary lane-changing maneuvers.
Figure 940.6.2 Transition between Freeway and Expressway 940.6.3 Parking on Facilities Parking is not allowed on highway facilities that are primarily intended to serve through-traffic movement (major roadways). Parking should generally not be permitted along minor roadways in rural areas due to the higher travel speeds typically associated with these facilities. Parking may be allowed on minor routes in urban and suburban areas if an engineering study indicates that it is safe to do so and that the parking will not hinder traffic operations or restrict sight distance. Normally, only parallel parking is allowed. Angle parking may be used in a central business district or as approved by the District Traffic Engineer to promote a “walkable” community. Local governments have the ability to prohibit or restrict parking within their jurisdiction.