Category:620 Pavement Marking (MUTCD Part 3): Difference between revisions
Jump to navigation
Jump to search
m New links added |
m Per Traffic, update of two JSPs (epoxy and high build) |
||
| Line 9: | Line 9: | ||
| ||[[media:620 Contrast Pavement Markings High Build.doc|Contrast Pavement Markings High Build]] | | ||[[media:620 Contrast Pavement Markings High Build.doc|Contrast Pavement Markings High Build]] | ||
|- | |- | ||
| ||[[media:620 Epoxy Wet Reflective Pavement Markings.doc|Epoxy Wet Reflective Pavement Markings]] | | ||[[media:620 Epoxy Wet Reflective Pavement Markings for Grooves.doc|Epoxy Wet Reflective Pavement Markings for Grooves]] | ||
|- | |- | ||
| ||[[media:620 Grooving for Pavement Markings.doc|Grooving for Pavement Markings]] | | ||[[media:620 Grooving for Pavement Markings.doc|Grooving for Pavement Markings]] | ||
|- | |- | ||
| ||[[media:620 High Build Wet Reflective Pavement Markings.doc|High Build Wet Reflective Pavement Markings]] | | ||[[media:620 High Build Wet Reflective Pavement Markings for Grooves.doc|High Build Wet Reflective Pavement Markings for Grooves]] | ||
|} | |} | ||
Revision as of 13:47, 18 July 2011

| Pavement Marking Operations Direction (Practical Operations Pavement Marking Implementation Plan) |
| Striping Communications Plan |
Pavement Marking Guidelines
| Divided Highways | Undivided Highways | |||
|---|---|---|---|---|
| Lane Lines | All Other Markings | All Markings | ||
| Contractor Installations | Major Roads | Grooved in wet reflective system using either epoxy or high build paint. Contrast markings on concrete. Minimum initial readings of 450 mcd/m2/lux required | Waterborne paint with type P beads | Waterborne paint with type P beads |
| Minor Roads | Waterborne paint with type P beads | Waterborne paint with type P beads | Waterborne paint with type P beads | |
| Intersection Markings | Type 2 tape, preformed thermoplastic or waterborne paint | |||
| MoDOT Forces | Major Roads – shall be striped by Memorial Day unless there is a performing durable marking | Waterborne paint with type PM beads | Waterborne paint with type PM beads | Waterborne paint with type PM beads |
| Regionally Significant Roads – shall be striped annually | Waterborne paint with type PM beads | Waterborne paint with type PM beads | Waterborne paint with type PM beads | |
| Other Minor Roads – maximum of 50 percent striped annually | Waterborne paint with type PM beads | Waterborne paint with type PM beads | Waterborne paint with type PM beads | |
| Intersection Markings | Type 2 tape, preformed thermoplastic or waterborne paint | |||
| Surface Treatments | Waterborne paint with type PM beads | Waterborne paint with type PM beads | Waterborne paint with type PM beads | |
Articles in "620 Pavement Marking (MUTCD Part 3)"
The following 16 pages are in this category, out of 16 total.
6
- 620.1 General (MUTCD Chapter 3A)
- 620.2 Pavement and Curb Markings (MUTCD Chapter 3B)
- 620.3 Crosswalk Markings (MUTCD Chapter 3C)
- 620.4 Circular Intersection Markings (MUTCD Chapter 3D)
- 620.5 Preferential Lane Markings for Motor Vehicles (MUTCD Chapter 3E)
- 620.6 Delineators (MUTCD Chapter 3G)
- 620.7 Colored Pavement (MUTCD Chapter 3H)
- 620.8 Channelizing Devices used for Emphasis of Pavement Marking Patterns (MUTCD Chapter 3I)
- 620.9 Marking and Delineation of Islands and Sidewalk Extensions (MUTCD Chapter 3J)
- 620.10 Rumble Strip Markings (MUTCD Chapter 3K)
- 620.11 MoDOT Pavement Marking Materials
- 620.12 Operational Procedures and Safety
- 620.13 Guidelines for Using Water-Borne Traffic Paint
- 620.14 Pavement Marking Maintenance
- 620.15 Construction Inspection for Sec 620
- 620.16 Measurement of Retroreflectivity by Handheld Retroreflectometers