237.13 Contract Plan File Name Convention

A conventional method of naming contract plan files is a necessary part of the implementation of electronic plans for MoDOT. This file naming convention is a vital part of the ProjectWise document management system.

237.13.1 Design Contract Plans

The file naming convention for all eProject documents shall begin:

[job#]_[general identification]_

The general identification is a description such as “SIMS_FORM”, “WORK_DAY_STUDY”, etc. The only CADD file that is place in eProjects is a zipped Electronic Design Data (EDD) file called Job#_EDD_info.zip. See EPG 237.14.3.2 Submittal of MoDOT Designed Projects.

The file naming convention for all Design Contract Plans shall be as follows:

[sheet#]_[abbreviated sheet type]_[optional sheet# by sheet type]_[job#]_[scale]_[optional description].dgn

The only acceptable characters will be capital letters, numbers, or an underscore "_". An underscore "_" will be used as a separation between items

[sheet#] is a sequential 3 digit number assigned to each sheet and should match that of the Index of Sheets of the Title Sheet. There are two exceptions to the 3 digit convention:

• First, for sheets #001 through #003, all Title Sheets will begin with the number #001, Typical Section Sheets will begin with #002 and Quantity Sheets will begin with number #003. For projects that do not have Typical Sections, the Quantity Sheets will begin with number #002.
• Second, for sheets with multiple borders (such as in cross-section (XS) sheets), the naming convention will differ as follows: The type of sheet will be followed by the sheet numbers. The following example shows cross-section sheets 011-015 followed by job #, scale, and optional description: XS_011-015_J0P0928_I5_RP1.dgn. There will be no leading numbers on these file names.

After sheet(s) #003, sequential numbering shall continue with no duplicate numbers. If a sheet (or sheets) need(s) to be inserted, a sequential letter will follow the number (004, 005, 006, 006A, 006B, 006C, 007, etc.). If more than 26 sheets are required to be inserted, the designer should consider renumbering all contract plans from the insertion point forward.

[abbreviated sheet type] is the 2 lettered abbreviation, identifying a particular kind of sheet (i.e., QU=Quantity Sheet, PP=Plan-Profile Sheet, etc.). These abbreviations shall be unique and also used in the Index of Sheets on the title sheet and must match.

[optional sheet# by sheet type] is an optional 2 or 3 digit number, assigned by a designer, within a particular sheet type (e.g., EC_01, EC_02 would be the 1st and 2nd Erosion Control Sheets).

[job#] is the job number as assigned by the district (e.g., J0P0928).

[scale] is the scale the MicroStation border was created in for a particular drawing (e.g., I1, I100).

[optional description] is a description added by the designer to quickly identify components of a project that need to be identified (e.g., STAGE1, 54THSTREET, etc.).

---

Example of No Typical Sections

001_TL_JXSXXXX.pdf

002_QU_01_JXSXXXX.pdf

002_QU_02_JXSXXXX.pdf

002_QU_03_JXSXXXX.pdf

002_QU_04_JXSXXXX.pdf

003_CL_01_JXSXXXX.pdf

004_CL_02_JXSXXXX.pdf

005_CL_03_JXSXXXX.pdf

006_CP_01_JXSXXXX.pdf

007_TC_01_JXSXXXX.pdf

008_TC_02_JXSXXXX.pdf

009_TC_03_JXSXXXX.pdf

010_TC_04_JXSXXXX.pdf

011_TC_05_JXSXXXX.pdf

012_TC_06_JXSXXXX.pdf

013_TC_07_JXSXXXX.pdf

014_TC_08_JXSXXXX.pdf

---

Example Single Quantity Sheet

---

Example Multiple Quantity Sheet

---

Example with Optional Description

---

Example Single Cross-Section Sheet

---

Example Multiple Cross-Section Sheets

237.13.2 Electronic Design Data

File naming convention for electronic design data files generated from GEOPAK for Roadway Contract Plans shall be as follows:

Contents File Report	project_data_Summary_report_[job#].XLSX
Geometry Files	civil_geometry_[job#].DGN
	civil_geometry_[job#].XML
	civil_geometry_report_[job#].XLSX
MicroStation Files	corridors_[job#].DGN
	graphical_filters_[job#].DGN
	superelevation_[job#].DGN
	drainage_[job#].DGN
	xs_[job#].DGN
	plan_[job#].DGN
	profile_[job#].DGN
	plan_profile_[job#].DGN
3D Existing Terrain Models	terrain_existing_[job#].DGN
	terrain_existing_[job#].XML
	survey_[job#].DGN
	survey_report_[job#].PDF
	survey_coordinate_[job#].CSV
3D Digital Design Models	proposed_surface_[job#].XML

237.13.3 Bridge Contract Plans

The file naming convention for all bridge contract plans shall be in accordance with EPG 751.5.1.4 Contract Plan File Name Convention.

237.13.4 Example Set of Plans

001_TITLE_J0P0928_ITITLESHEET.dgn	009_SS_02_J0P0928_I20.dgn
002_TS_01_J0P0928_I5_001.dgn	010_EC_01_J0P0928_I50.dgn
002_TS_02_J0P0928_I5_002.dgn	011_EC_02_J0P0928_I50.dgn
002_TS_03_J0P0928_I5_003.dgn	012_EC_03_J0P0928_I50.dgn
002_TS_04-06_J0P0928_I5_004.dgn	013_CS_01_J0P0928_I10.dgn
002_TS_04-06_J0P0928_I5_005.dgn	014_CS_02_J0P0928_I10.dgn
002_TS_04-06_J0P0928_I5_006.dgn	B_A6885_001_J0P0928_FrontSheet.dgn
003_QU_01-05_J0P0928_I1_001.dgn	B_A6885_002_J0P0928_CulvertDetails.dgn
003_QU_01-05_J0P0928_I1_002.dgn	B_B7008_003_J0P0928_BarBill.dgn
003_QU_01-05_J0P0928_I1_003.dgn	B_B7008_004_J0P0928_InfoSheets.dgn
003_QU_01-05_J0P0928_I1_004.dgn	XS_001-005_J0P0928_I5_Stage1_001.dgn
003_QU_01-05_J0P0928_I1_005.dgn	XS_001-005_J0P0928_I5_Stage1_002.dgn
003_QU_06_J0P0928_I1.dgn	XS_001-005_J0P0928_I5_Stage1_003.dgn
004_PP_J0P0928_I50_Rte65.dgn	XS_001-005_J0P0928_I5_Stage1_004.dgn
005_PP_J0P0928_I50_Rte65.dgn	XS_001-005_J0P0928_I5_Stage1_005.dgn
006_PP_J0P0928_I50_Rte65.dgn	XS_006-010_J0P0928_I5_Stage1_006.dgn
007_PP_J0P0928_I50_Rte65.dgn	XS_006-010_J0P0928_I5_Stage1_007.dgn
007A_PP_J0P0928_I50_Rte65.dgn	XS_006-010_J0P0928_I5_Stage1_008.dgn
008_SS_01_J0P0928_I20.dgn	XS_006-010_J0P0928_I5_Stage1_009.dgn

237.13.5 Example Set of Electronic Design Data

Content's File Report	Project_Data_Summary_Sheet_J2P0928.pdf
	Civil_Geometry_Report.xlsx or pdf
Horizontal & Vertical Civil Features File	Civil_Geometry_J0P0928.xml
Power GeoPak SS4 Files	Civil_Geometry_J0P0928.dgn
	Corridors_J0P0928.dgn
	Drainage_J0P0928.dgn
	Graphical_Filters_J0P0928.dgn
	Plan_J0P0928.dgn
	Profile_J0P0928.dgn
	Striping_J2P0928.dgn
	Superelevation_J0P0928.dgn
	Survey_Exported_Graphics_J0P0928.dgn
	Survey_Terrain_J0P0928.dgn
	Survey_J0P0928.dgn
	Coordinate_Points_Sheet_J0P0928.dgn
	XS_J0P0928.dgn
Terrain Files	Terrain_Existing_J0P0928.xml
	Terrain_Proposed_J0P0928.xml
Survey Files	Survey_Coordinate_File_J0P0928.csv
	Survey_Report_J0P0928.pdf

237.13.6 Index of Sheets

Following is an example of the Index of Sheets on the title sheet:

DESCRIPTION

SHEET NUMBER

TITLE SHEET---------------------------------------------------------------------1

TYPICAL SECTIONS (TS) (XX SHEETS)---------------------------------2

QUANTITIES (QU) (XX SHEETS)-------------------------------------------3

PLAN-PROFILE (PP)-------------------------------------------------------XX-XX

RIGHT OF WAY (RW)------------------------------------------------------XX-XX

REFERENCE POINTS (RP)----------------------------------------------XX-XX

COORDINATE POINTS (CP)---------------------------------------------XX-XX

SPECIAL SHEETS (SS)---------------------------------------------------XX-XX

TRAFFIC CONTROL SHEETS (TC)------------------------------------XX-XX

EROSION CONTROL SHEETS (EC)----------------------------------XX-XX

LIGHTING (LT)---------------------------------------------------------------XX-XX

SIGNALS (SG)----------------------------------------------------------------XX-XX

SIGNING (SN)----------------------------------------------------------------XX-XX

PAVEMENT MARKING (PM)---------------------------------------------XX-XX

CULVERT SECTIONS (CS)-----------------------------------------------XX-XX

BRIDGE DRAWINGS (B)

A####------------------------------------------------------------------------XX-XX

A####------------------------------------------------------------------------XX-XX

A####------------------------------------------------------------------------XX-XX

A####------------------------------------------------------------------------XX-XX

CROSS-SECTIONS (XS)----------------------------------------------------XX-XX