Difference between revisions of "Category:700 STRUCTURES AND HYDRAULICS"
Jump to navigation
Jump to search
| Line 16: | Line 16: | ||
<categorytree mode=all>748 Hydraulics and Drainage</categorytree> | <categorytree mode=all>748 Hydraulics and Drainage</categorytree> | ||
| + | <categorytree mode=all>749 Hydrologic Analysis</categorytree> | ||
| + | <categorytree mode=all>750 Hydraulic Analysis</categorytree> | ||
<categorytree mode=all>756 Seismic Design</categorytree> | <categorytree mode=all>756 Seismic Design</categorytree> | ||
Revision as of 12:47, 4 December 2006
| Key Points - Structures | |
|---|---|
| A bridge is a structure spanning a minimmum of 20 feet grade separation or crossing water. There are about 10,000 bridges in Missouri's state highway system. Bridges are described as simple or continuous and according to structure type and material.
Once the need concerning a bridge structure is identified in a project then a core team is established, the scope of the project is developed, a bridge survey is submitted and preliminary design begins. The bridge need could involve rehabilitating or widening an existing structure or building a new structure or retaining wall. There is no perfect bridge type for all situations. With practical design, engineers are expected and encouraged to consider and evaluate all potential solutions and project factors that ultimately impact the cost of the structure. However, any variations to the information in this guide should be discussed in advance with the appropriate Structural Liaison Engineer or Structural Project Manager. |
|
| Key Points - Hydraulics | |
|---|---|
|
Some hydraulics intro here yadayad ayayayayayayyaya yyyyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyy yyyyyyyyyy yyyyyyyyyy yyyyyyyyyy yyyyyyyyyy yyyyyyyyyy yyyyyyyy yy yyyyyyy yyyyyyyyyyyyy yyyy yyy yyyyyyy. |
