Difference between revisions of "413.2 Scrub Seal"
Jump to navigation
Jump to search
m (minor clarifications to differentiate EPG articles (that are referenced as "articles", not "sections") from specifications (that are referenced as "sections")) |
|||
| Line 1: | Line 1: | ||
==413.2.1 Material Inspection== | ==413.2.1 Material Inspection== | ||
| − | Aggregate for use in surface treatments shall be inspected in accordance with [[:Category:1001 General Requirements for Material|1001 General Requirements for Material]]. Asphalt Binder for use in surface treatments shall be inspected in accordance with [[:Category:1015 Bituminous Material|1015 Bituminous Material]]. | + | Aggregate for use in surface treatments shall be inspected in accordance with [[:Category:1001 General Requirements for Material|EPG 1001 General Requirements for Material]]. Asphalt Binder for use in surface treatments shall be inspected in accordance with [[:Category:1015 Bituminous Material|EPG 1015 Bituminous Material]]. |
[[413.1 Micro-Surfacing#District Procedure|District procedures]] are identical to those in micro-surfacing. | [[413.1 Micro-Surfacing#District Procedure|District procedures]] are identical to those in micro-surfacing. | ||
Revision as of 13:28, 2 April 2010
413.2.1 Material Inspection
Aggregate for use in surface treatments shall be inspected in accordance with EPG 1001 General Requirements for Material. Asphalt Binder for use in surface treatments shall be inspected in accordance with EPG 1015 Bituminous Material.
District procedures are identical to those in micro-surfacing.
413.2.2 Laboratory Procedures
No additional procedures in this section of the Engineering Policy Guide.
