Difference between revisions of "127.25 Maintenance Environmental Policies"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (→‎127.25.7 Hazardous Waste: Per Environmental, added "When a Product Becomes a Waste" to bring EPG guidance into compliance with current practice.)
m (→‎127.25.7.3 Lead Based Paint Abatement: Per Environmental, process change required by MoDOT's signing an MOU with DHSS.)
Line 341: Line 341:
 
===127.25.7.3 Lead Based Paint Abatement===
 
===127.25.7.3 Lead Based Paint Abatement===
  
 +
The following activities involving lead paint abatement currently require licensing of personnel and project notification to the Department of Health & Senior Services (DHSS):
 +
 +
:1) any testing or identification of lead-based paint on the surface of structures,
 +
:2) determinations of whether a painted structure is a lead hazard because of deteriorated paint, and
 +
:3) performance of lead abatement activities.
 +
 +
MoDOT has entered into a Memorandum of Understanding (MOU) with the DHSS that stipulates the above requirements will be followed for all MoDOT-let lead abatement projects.  Specific requirements include:
 +
 +
:1) all contractors and subcontractors performing lead abatement activities must be licensed as Missouri lead abatement contractors.  Additionally, employees of the contractors performing lead abatement activities are required to be licensed as Missouri lead abatement supervisor(s) and/or workers,
 +
:2) the MoDOT Resident Engineer (RE) shall provide notification to DHSS through the submittal of a lead abatement project funding agency notification form which is required to be submitted 10 days prior to the onset of lead abatement projects, and
 +
:3) the contractor shall also provide notification to DHSS through the submittal of a lead abatement project notification form which is required to be submitted 10 days prior to the onset of lead abatement projects. 
 +
 +
Information on both the [http://www.modot.mo.gov/business/contractor_resources/LeadPaintActivities.htm MOU and contractor information for lead work activities] is available.
 +
 
 
Lead based paint removed from any surface is considered a hazardous waste.  Lead based paint removed from steel structures or buildings shall be containerized, labeled and disposed of at an approved hazardous waste facility.In some instances the lead paint and blast material may be recycled and exempted as a hazardous waste.  Contact an Environmental Specialist for assistance or additional information.
 
Lead based paint removed from any surface is considered a hazardous waste.  Lead based paint removed from steel structures or buildings shall be containerized, labeled and disposed of at an approved hazardous waste facility.In some instances the lead paint and blast material may be recycled and exempted as a hazardous waste.  Contact an Environmental Specialist for assistance or additional information.
 
    
 
    
 
'''Reason for Policy''': [http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&tpl=/ecfrbrowse/Title40/40cfr260_main_02.tpl 40 CFR 260] – [http://www.access.gpo.gov/nara/cfr/waisidx_06/40cfr265_06.html 265] and [http://www.access.gpo.gov/nara/cfr/waisidx_03/40cfr268_03.html 40 CFR 268], [http://www.moga.mo.gov/STATUTES/C260.HTM RSMo 260], [http://www.sos.mo.gov/adrules/csr/current/10csr/10c25-4.pdf 10 CSR 25-4.010], Hazardous Waste Management.
 
'''Reason for Policy''': [http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&tpl=/ecfrbrowse/Title40/40cfr260_main_02.tpl 40 CFR 260] – [http://www.access.gpo.gov/nara/cfr/waisidx_06/40cfr265_06.html 265] and [http://www.access.gpo.gov/nara/cfr/waisidx_03/40cfr268_03.html 40 CFR 268], [http://www.moga.mo.gov/STATUTES/C260.HTM RSMo 260], [http://www.sos.mo.gov/adrules/csr/current/10csr/10c25-4.pdf 10 CSR 25-4.010], Hazardous Waste Management.
 +
 +
[http://www.moga.mo.gov/STATUTES/C701.HTM 701.300-701.332, RSMo] and 19 CSR 30-70.600(19)
 +
 +
Lead Abatement and Assessment Licensing, Training Accreditation.
 
    
 
    
 
'''Effective Date''': 6/1/99
 
'''Effective Date''': 6/1/99

Revision as of 12:22, 12 June 2012

Forms
Deer Death Report Form and Map (Excel)
Additional Information
Top Ten Spill Prevention Items

Contents

127.25.1 Solid Waste

127.25.1.1 Asbestos

Asbestos or possible asbestos containing material that is to be removed during remodeling, repair or demolition shall be sampled by a MoDOT Asbestos Inspector. Material that tests positive for asbestos must be removed by a permitted removal contractor and overseen by a MoDOT Asbestos Contractor Supervisor. All asbestos containing materials shall be handled according to local, state and federal regulations. Asbestos containing materials that do not have to be removed or disturbed shall be left in place. Materials found to have been damaged or become friable (crumbles easily) will be repaired or removed and replaced with non asbestos containing material. All asbestos work must be done by qualified personnel.There are two types of notifications required by MDNR in regard to asbestos abatement and demolition. Asbestos abatement notification must be provided to MDNR at least 10 working days prior to the start of the project. Demolition or major renovation notification must be provided to MDNR at least 10 working days prior to the start of that project. The demolition notice is required even if there is no asbestos identified in the project.

Reason for Policy: 10 CSR 10-6, Air Pollution Control Program

RSMo 643.225 - 643.620 Air Conservation

Effective Date: 6/1/99

Revision Dates:

127.25.1.2.jpg

127.25.1.2 Solid Waste

The department shall dispose of garbage, refuse and other discarded material in a permitted sanitary landfill. Materials such as whole tires, batteries, appliances, used oil and hazardous wastes are prohibited from being disposed of in a sanitary landfill and shall be recycled as regulations dictate.

Reason for Policy: RSMo 260.200 - 260.345 Environmental Control

Effective Date: 6/1/99

Revision Dates:

127.25.1.3 Tire Management

Waste tires unsuitable for sale or recapping shall be disposed of under state contract. Contact an Environmental Specialist for current contract information. Burning tires or tire pieces is prohibited. Tires and tire pieces shall be stored in a manner that avoids providing a mosquito-breeding site. Twenty-five or more whole tires stored at any one site must be covered. Maintain an inventory of less than 500 whole tires at any one site, at any one time, unless they are loaded on a truck for disposal.

Reason for Policy: 10 CSR 80-8.010 - 80-8.040 Solid Waste Management

Effective Date: 6/1/99

Revision Dates:

127.25.1.4 Street Sweepings

Street sweepings are considered solid waste by the Missouri Department of Natural Resources (MDNR). The sweepings must be disposed of in a permitted sanitary landfill. An exception from disposal in a landfill has been granted by MDNR. To qualify for the exemption, the street sweepings must meet the beneficial use requirements as established by MDNR.

MDNR Approval Letters and Street Sweeping Sampling Information
Street Sweep MDNR 2007 letter
Street Sweep MDNR 2010 letter
Street Sweep Guidance/Beneficial Use Approval
Street Sweep Sampling Protocol

To qualify for the beneficial use exception, the sweepings must be composed of grit and dirt from the roadway surface and only minor amounts of trash, litter or automotive parts can be present in the sweepings. The sweepings can contain asphaltic concrete materials as clarified in the April 2010 MDNR approval letter.

Street sweepings need to be processed or screened to remove trash, litter and other debris. If the screenings still contain excessive amounts of trash, litter or other debris, additional processing will be required; or the materials will need to be disposed in a landfill. All of the trash, litter and other debris removed by the screening process shall be disposed of in a sanitary landfill.

Sampling and testing of the screened grit and dirt material is required by MDNR. At least one sample must be collected for every 500 cubic yards of screened material created. The guidance in the sampling protocol must be followed. This includes proper sample collection, preservation and analysis by MoDOT’s chemical laboratory. Questions regarding the sampling protocol should be directed to Environmental section of the Design Division.

A copy of the sample results must be kept on file at the Maintenance building where the screenings were processed and a copy of the sample results needs to be provided to the Environment section of the Design Division.

Reason for Policy: 10 CSR 80 Solid Waste Management Regulations, RSMo 644 Missouri Clean Water Law, and 10 CSR 20-6 regulations.

Effective Date: 6/1/99

Revision Dates:

127.25.1.5 Antifreeze

Used antifreeze from vehicle maintenance activities shall be collected and processed through a MoDOT antifreeze recycler for reuse in the vehicle. Antifreeze not recycled in the vehicle must be sent to a recycler that accepts antifreeze. Antifreeze may never be discharged to storm sewers, septic systems, streams or on the ground.

Reason for Policy: 10 CSR 25-5.262, Hazardous Waste Management Program. Antifreeze is considered a solid waste. Reduce antifreeze cost and disposal cost.

Effective Date: 6/1/99

Revision Dates:

127.25.1.6 Battery Management

All non-rechargeable batteries shall be managed as a solid waste. All rechargeable batteries shall be recycled with an approved recycler. Place cracked lead acid batteries in an acid safe container and contact your battery recycler or Environmental Specialist for specific information. All lead acid batteries should be inside secondary containment.

Reason for Policy: 10 CSR 80 Solid Waste Management Program. Non rechargeable batteries are considered to be a solid waste. 10 CSR 25, Hazardous Waste Management Regulations. Rechargeable batteries contain specific hazardous components such as nickel, cadmium, mercury, lead and sulfuric acid that cause the batteries to be a hazardous waste unless they are sent to a recycler.

Effective Date: 6/1/99

Revision Dates:

127.25.1.7 Disposal of Animal Carcasses

Animal carcasses found on MoDOT right of way shall be disposed of properly. Options for disposal are listed below under Accepted Disposal Practices. It is the supervisor's responsibility to choose the option that best suits the needs of their particular area. Disposal practices other than the accepted practices listed below will require State Maintenance Engineer approval.

Since the distribution of a 1987 letter of agreement, MoDOT has reported all deer killed on its right of way to the Missouri Department of Conservation (MDC). Each deer found on MoDOT right of way is to be reported to the district office and the information logged on the Deer Death Report Form and Map (Excel). The monthly log sheets are to be forwarded to the Maintenance Operations Functional Unit at General Headquarters by the 15th of the following month. The information will be forwarded to the MDC.

Accepted Disposal Practices

  • Option 1 - Bury the carcass on highway right of way, provided it is not prohibited by local ordinances, and not in a waterway. The carcass should be buried at a minimum depth of 30 inches. Call 800-DIG-RITE (800-344-7483) prior to digging.
  • Option 2 - Dispose of the animal carcass at a state-approved sanitary landfill, with the landfill operator's approval. There will likely be a fee associated with this option.
  • Option 3 - Dispose of the carcass in an animal compost bin, which can be built at a maintenance facility. The compost bin and disposal procedures shall meet the guidelines established by the University of Missouri.
  • Option 4 - Dispose of the carcass at a site and in a manner pre-approved by the MDC. Written approval from MDC is required.
  • Option 5 - Where available, the carcass may be taken to a city or county animal control facility equipped to dispose of animal carcasses.
  • Option 6 - Missouri law allows an individual who has struck and killed a deer with their vehicle to claim the deer carcass if written authorization to possess the deer is granted by a MDC Agent.
  • Option 7 - Disposal of domestic animal carcasses by the owner is allowed provided the owner can be identified in a timely manner. If there are any identifying marks on the carcass, department personnel shall attempt to notify the owner.

Reason for Policy: RSMo 269 Environmental Control 40 CFR 30 Federal Endangered Species Act, DNR Solid Waste Program and Water Pollution Control Program,MoDOT liability.

Effective Date: 12/12/01

Revision Date:

127.25.2 Hazardous Material Spills

127.25.2.1 Hazardous Material Spills (Roadway) by Others

MoDOT may become responsible for abandoned drums and containers, illegal dumped chemicals and accidental releases of hazardous materials on Department property. When hazardous material spills and incidents are discovered on department property, MoDOT personnel shall follow the Department's Hazardous Materials Reporting Procedures September 1997, to assure the material is handled properly. Reporting will be made to the Missouri Department of Natural Resources (MDNR) Environmental Emergency Response (EER) (573-634-2436) in accordance with MoDOT procedures and Missouri RSMo 260.500 through 260.550.

Note: All unknown materials and containers will be treated as hazardous waste until proven otherwise. When an unknown material or a known hazardous material is discovered on the Department's property, the District Hazardous Material Coordinator (DHMC) will be notified. The DHMC will call the MDNR ERR 24 hour hot line number 573-634-2436 and report all information available to the ERR. It will then be the responsibility of the MDNR ERR to take control of the material if it is hazardous. If the material is not hazardous and a responsible party cannot be identified then the material will could become the responsibility of MoDOT. All materials, where an owner (responsible party) can be identified, will be the responsibility of the owner. It may be necessary for the District to write a permit to the owner or MDNR ERR to allow cleanup on Department property.

Reason for Policy: RSMo 260.500 - 260.550 Environmental Control 40 CFR 260 - 261, MoDOT liability

Effective Date: 6/1/99

Revision Dates:

127.25.2.2 MoDOT Hazardous Material Spills

Top Ten Spill Prevention Items

Refer to MoDOT's Hazardous Materials Reporting Procedures Training for guidance to reporting spills discovered along the highway. Hazardous material spills, and spills of other materials that leave MoDOT and enter waters of the state from MoDOT operations are the responsibility of the Department and will be reported to the MDNR ERR 24 hour hot line number immediately by the first Department employee to discover the spill. That employee will also notify their supervisor and the DHMC. An environmental specialist will also be notified of the spill. MoDOT employees will take immediate action to contain the release and clean up spilled material. Reporting will be made to the Missouri Department of Natural Resources (MDNR) Environmental Emergency Response (ERR) 573-634-2436 in accordance with MoDOT procedures and Missouri RSMo 260.500 through 260.550. If any of the material spilled comes in contact with waters of the state (creeks, springs, rivers, groundwater or ponds) the incident shall also immediately be reported to the National Response Center (NRC) at 800-424-8802. Incidents during the normal working day should be reported to the district as soon as possible. The District office should report to the Maintenance division as soon as possible. Should an incident occur after normal working hours, information should be telephoned to available maintenance personnel and contact an Environmental Specialist, Design Division at the contact numbers in the SPCC plan.

Reason for Policy: RSMo 260.500 - 260.550 Environmental Control

Effective Date: 6/1/99

Revision Dates:

127.25.3 Rest Areas

127.25.3.1 Rest Area Lagoon

All rest area lagoons shall have a current National Pollution Discharge Elimination System (NPDES) permit. These permits require the department to submit discharge samples results on a regular basis to the Missouri Department of Natural Resources. The department will comply with all requirements of the (NPDES) permits. Application for renewal shall be submitted to MDNR every five years at least 180 days prior to the expiration date of the permit. All NPDES permits must be kept current.The NPDES permit describes the limits and requirements for each specific site. These requirements include the discharge limits, frequency of sampling, location of sampling and where sample results are to be submitted. All reporting requirements and sample collection will be in compliance with the NPDES permit. A copy of the permit shall be readily available to the person who conducts sampling and report submittal.

Reason for Policy: RSMo 644 Water Pollution,Federal Water Pollution Control Act, Public Law 92-500, 92nd Congress

Effective Date: 6/1/99

Revision Dates:

127.25.3.2 Rest Area Drinking Water

All rest areas that are using on-site wells as the source of drinking water shall have a valid operating permit issued by the Missouri Department of Natural Resources (MDNR) Public Drinking Water Program (PDWP). Operation and maintenance of these wells shall be in accordance with the MDNR-PDWP rules and regulations pertaining to drinking water supplies. Rest areas that are served by a municipal or public water supply shall adhere to specific rules and regulations established by the water supplier concerning operation and maintenance of the water distribution system. For additional information see EPG 127.25.4.3 Well Closures and EPG 127.25.3.2.1 Well Drilling.


Reason for Policy: 10 CSR 60-1.010 Public Drinking Water

Effective Date: 6/1/99

Revision Dates:

127.25.3.2.1 Well Drilling

The following procedures are established for well drilling:

  • The district office shall request the Department of Natural Resources (DNR), Research and Technical Information Division, Rolla, Mo., to advise the district office concerning the expected depth of the proposed well and the estimated casing depth.
  • The district office will use the "Standard Bid Form - Well Drilling" to receive bids for the work from only licensed well drillers.
  • The district shall appoint an employee who is familiar with well drilling to make regular inspections of the work in progress.

For additional information see EPG 127.25.3.2 Rest Area Drinking Water and EPG 127.25.4.3 Well Closures.

Reason for Policy: RSMo 256.000-256.640

Effective Date: 6/1/99

Revision Dates:

127.25.4 Water Management

127.25.4.1 Storm Water Regulations

Any activity which disturbs more than five acres of total land area requires a storm water permit from the Missouri Department of Natural Resources (DNR). This would include construction of new maintenance lots where more than five acres of land is disturbed during the development of the lot. Linear, strip or ribbon construction or maintenance activities such as cleaning or routine maintenance of roadside ditches is exempt from the storm water permit requirements. MoDOT has a "General Land Disturbance Permit" from the MDNR that contains an approved erosion and sediment control plan. Contact an Environmental Compliance Coordinator if you have questions. Most MoDOT operations are covered under this General Permit, however, if the proposed project is within 1,000 ft of a specially designated water body, a site specific storm water permit will be required from MDNR. The MDNR defines storm water as storm water runoff, snow melt runoff, surface runoff and drainage.

Reason for Policy

10 CSR 20-6.200 Missouri Department of Natural Resources, Water Pollution Control Program

Effective Date: 6/1/99

Revision Dates:

127.25.4.2 Maintenance Operations in Streams

Activities in streams, whether permanent or intermittent, are regulated by the U.S. Army Corps of Engineers (COE)(i.e., they require 404 Permits). Districts shall contact the local COE Office prior to beginning any work in streams. The necessary permits for removal or placement of materials in the stream shall be obtained from the COE prior to conducting the work, unless emergency authorization has been given by the COE to do the work. Technical assistance can be obtained from the Bridge Maintenance section of the Maintenance Division in applying for a COE 404 permit.

For additional infoprmation see - EPG 127.25.4.1 Storm Water Regulations.

Reason for Policy

The specific regulatory authority for the COE is based on the following laws: Rivers and Harbors Act of 1899 - Section 10; Clean Water Act - Section 404; Marine Protection Research and Sanctuaries Act of 1972 (amended) - Section 10333; and CFR 320 - 330 (Code of Federal Regulations) Water Quality Certification.

Effective Date: 6/1/99

Revision Dates:

127.25.4.3 Well Closures

The proper abandonment of water wells is imperative to the protection of ground water. All wells not in use or planned to be used shall be properly closed to comply with the Water Drillers Act. A permitted water well, pump installer, monitoring well or heat pump installer shall oversee the closures. Contact an environmental specialist for guidance in well closures. See - EPG 127.25.3.2 Rest Area Drinking Water and EPG 127.25.3.2.1 Well Drilling.

Reason for Policy: RSMo 256.000 - 256.637 Geology, Water Resources and Geodetic survey 10 CSR 23–3.110

Effective Date: 6/1/99

Revision Dates:

127.25.5 Containers

127.25.5.1 Fuel Storage Tanks

Underground fuel storage tanks and their piping are required to have operational, approved leak, corrosion and overfill protection and when necessary, vapor controls. A tank registration form shall be submitted to the Missouri Department of Natural Resources within 30 days of bringing a tank into use and when a change is made to the tank or ancillary equipment.

All above ground tanks shall be labeled as to their contents. Any facility that has any kind of oil storage capacity (55 gallons or larger containers) that totals 1320 gallons aggregate, is required to have a SPCC plan. All containers of oil are required to have secondary containment with sufficient capacity to hold the largest container plus the maximum expected rainfall. The plan must be made available to an EPA inspector if requested during an on-site inspection.

Tanks that exceed the minimum reportable quantity of hazardous material require an NFPA 704 Hazard Communication sign. For additional information see EPG 127.25.5.1.1 Fuel Pump Calibration and EPG 127.25.5.1.2 Fuel.

Reason for Policy: 40 CFR 112

Effective Date: 6/1/99

Revision Dates:

127.25.5.1.1 Fuel Pump Calibration

Fuel pumps shall be calibrated annually except for those that have a history of reporting errors, or when normal tracking of petroleum usage indicates that there is a problem. Those pumps that are showing unacceptable variances should be calibrated as needed and corrections made until the problem is solved or the pump is replaced.

For additional information see EPG 127.25.5.1 Fuel Storage Tanks.

Reason for Policy: MoDOT inventory requirement to eliminate petroleum theft.

Effective Date: 6/1/99

Revision Dates:

127.25.5.1.2 Fuel

The department and the Highway Patrol (MSHP) shall work together at selected maintenance locations to reduce the duplicate investment in fuel storage and dispensing equipment. This cooperative effort shall be accomplished in two ways:

  • The MSHP tank will be removed and they will fuel from MoDOT's tank.
  • The Patrol may fuel from their above ground tank with MoDOT taking over the responsibility of the tank as if it were their own. This would include ordering fuel for this tank as well as for the maintenance tank.

The first option will be used for any new installation of above ground setups. The second option will be used where the Patrol already has an approved above ground system.

MoDOT will not provide gasoline for those locations where that product is not otherwise needed by the department. Other state agencies, authorized by Business and Benefits, will be allowed to receive gasoline and/or diesel fuel at maintenance lots.

For additional information see EPG 127.25.5.1 Fuel Storage Tanks.

Reason for Policy: Reduce cost of operation. Assist MSHP with their operations in accordance with an agreement between MoDOT and MSHP.

Effective Date: 6/1/99

Revision Dates:

127.25.5.2 Herbicide Containers

Instructions on container labels shall be followed for storage, use and disposal of containers and their contents. Empty herbicide containers shall be triple rinsed with water and the rinsate reused in mixing operations. The container shall be returned to the supplier or disposed of in a permitted sanitary landfill or sent to a recycler. To dispose of containers containing some herbicide material or an out of specification herbicide, contact an environmental specialist for assistance.

Reason for Policy: RSMo 260 Environmental Control, RSMo 281 Pesticides

Effective Date: 6/1/99

Revision Dates:

127.25.5.3 Empty Drums and Containers

All empty (less than an inch of product remaining) containers, including 55 gallon drums, shall have all openings closed with containers stored on their sides to prevent rainwater from mixing with product residues.

Reason for Policy: 40 CFR 260261; 10 CSR 25. Prevent the formation of large quantities of used products that require compying with Hazardous Waste Regulation

Effective Date: 6/1/99

Revision Dates:

127.25.6 Environmental Compliance

127.25.6.1 Threatened or Endangered Species

All MoDOT Maintenance activities shall be conducted in a manner that does not impact any Federally or State listed threatened or endangered species or their critical habitat. If an activity will impact a listed species, MoDOT must conduct formal consultation with the U.S. Fish and Wildlife Service and obtain a Biological Opinion prior to conducting the activity.

Prior to starting any new acitivities (mowing, spraying, etc.) or changing methods for conducting established acitivities maintenance personnel should contact Alan Leary at (573) 526-6678 or Bree McMurray at (573) 526-0606 to determine if the activity will impact any rare species or critical habitat.

Reason for Policy: 50 CFR 17 Endangered Species Act, 3 CSR 10-4.111, State Endangered Species Rule

Effective Date: 6/1/99

Revision Dates:

127.25.6.2 Tier II Reporting

A copy of the Tier II Reporting form shall be clearly posted on a bulletin board in each maintenance building. Tier II refers to state and federal Emergency Planning Community Right-to-Know Act (EPCRA).

Reason for Policy: RSMo 292.606 Missouri Emergency Planning and Community Right-to-Know Act

Effective Date: 6/1/99

Revision Dates:

127.25.7 Hazardous Waste

127.25.7.1 Hazardous Waste Compliance

The department shall comply with all Federal (RCRA) and State (MDNR) regulations regarding waste materials. This includes the generation, transportation, storage, and disposal of hazardous waste. If you have reason to think your site or location is producing a hazardous waste you should contact the district Hazardous Material Spill Coordinator or an environmental specialist in the Design Division.

Reason for Policy: 10 CSR 25-1.010 and 10 CSR 25-14.010, Missouri Hazardous Waste Management Regulations, RSMo. 260, 40 CFR 260 - 265.

Effective Date: 6/1/99

Revision Dates:

127.25.7.2 When a Product Becomes a Waste

Generators must use products for their intended purpose. A product can become a waste if a facility does not properly store the material or the product is beyond its shelf life. If a generator is no longer using the product, it must be properly disposed and not abandoned or stored. A facility storing a material that is a hazardous waste must comply with Missouri’s hazardous waste regulations.

Missouri Department of Natural Resources has produced the Waste or Product Determination Guidance to provide criteria to consider when a product becomes a waste.

Reason for Policy: 10 CSR 25-1.010 and 10 CSR 25-14.010, Missouri Hazardous Waste Management Regulations, RSMo. 260, 40 CFR 260 - 265.

127.25.7.3 Lead Based Paint Abatement

The following activities involving lead paint abatement currently require licensing of personnel and project notification to the Department of Health & Senior Services (DHSS):

1) any testing or identification of lead-based paint on the surface of structures,
2) determinations of whether a painted structure is a lead hazard because of deteriorated paint, and
3) performance of lead abatement activities.

MoDOT has entered into a Memorandum of Understanding (MOU) with the DHSS that stipulates the above requirements will be followed for all MoDOT-let lead abatement projects. Specific requirements include:

1) all contractors and subcontractors performing lead abatement activities must be licensed as Missouri lead abatement contractors. Additionally, employees of the contractors performing lead abatement activities are required to be licensed as Missouri lead abatement supervisor(s) and/or workers,
2) the MoDOT Resident Engineer (RE) shall provide notification to DHSS through the submittal of a lead abatement project funding agency notification form which is required to be submitted 10 days prior to the onset of lead abatement projects, and
3) the contractor shall also provide notification to DHSS through the submittal of a lead abatement project notification form which is required to be submitted 10 days prior to the onset of lead abatement projects.

Information on both the MOU and contractor information for lead work activities is available.

Lead based paint removed from any surface is considered a hazardous waste. Lead based paint removed from steel structures or buildings shall be containerized, labeled and disposed of at an approved hazardous waste facility.In some instances the lead paint and blast material may be recycled and exempted as a hazardous waste. Contact an Environmental Specialist for assistance or additional information.

Reason for Policy: 40 CFR 260265 and 40 CFR 268, RSMo 260, 10 CSR 25-4.010, Hazardous Waste Management.

701.300-701.332, RSMo and 19 CSR 30-70.600(19)

Lead Abatement and Assessment Licensing, Training Accreditation.

Effective Date: 6/1/99

Revision Dates:

127.25.7.4 Equipment Cleaning Fluids

The department shall make every effort to purchase fluids that do not exhibit any characteristics of hazardous materials which would result in the generation of a hazardous waste when used. These characteristics include the following:

  • A flash point of 140 degrees Fahrenheit or less
  • Corrosive, a pH of equal to or less than 2 or equal to or greater than 12.5
  • Reacts violently with water
  • Listed as a toxic hazardous waste
  • Product must be on MREP products list

An example of exceptions to this policy are cleaners for electronic equipment because adequate non hazardous alternatives are not available.

Reason for Policy: Clean Water Act, Solid Waste Law, Hazardous Waste Law. MoDOT desires to produce as few hazardous wastes as possible. Chlorinated solvents pose a health risk to employees .

Effective Date: 6/1/99

Revision Dates:

127.25.7.5 Used Oil

The department shall store used oil, prior to shipment off-site, in containers that are in good condition, void of leaks and labeled with the words used oil. All containers of oil are required to be included in the SPCC plan and have secondary containment with sufficient capacity to hold the largest container plus the maximum expected rainfall.

NOTE: Used petroleum fluids such as gear lube, transmission oil and hydraulic oil are defined as used oils. Mixing of small amounts of other solvents may be possible with prior approval from the contractor. Never put antifreeze in a used oil container. Records of contracts, shipper name and identification number, dates of shipment, quantity and type of oil and the processor's name and permit number shall be kept on file.

Reason for Policy: 10 CSR 25-11, Hazardous Waste Program.

Effective Date: 6/1/99

Revision Dates:

127.25.7.6 Hazardous Waste Reporting

The department must file a quarterly summary report for all MoDOT hazardous waste shipments from the large quantity generator sites with the Missouri Department of Natural Resources (MDNR). Annual reports are required for small quantity and one-time shipment sites. A copy of the hazardous waste manifest document shall be forwarded to the district hazardous materials spill coordinator, after it is received from the hazardous waste facility, and sent to the support center. If the hazardous waste manifest is not received from the hazardous waste facility within 45 days, an exception report must be filed with MDNR.

Reason for Policy: 10 CSR 25-5.262 Missouri Hazardous Waste Management Regulations.

Effective Date: 6/1/99

Revision Dates:

127.25.8 General

127.25.8.1 Open Burning

There shall be no open burning of trade waste or refuse generated by the department at any of it's facilities except for open burning of tree trunks, limbs and vegetation at the point of generation, unless permitted. Restrictions concerning open burning:

Contact individual county planning and zoning offices for areas requiring compliance.Trade wastes are defined as solid, liquid, or gaseous material resulting from construction or the prosecution of any business, trade or industry or any demolition operations including, but not limited to cardboard, plastics, cartons, grease, oil, chemicals or cinders. Trade wastes include scrap lumber and wooden shipping pallets.Refuse is defined as garbage, rubbish, trade waste, leaves, salvageable material, agricultural wastes or other wastes.

Reason for Policy: Comply with State Regulations Air Pollution Control Law and Regulations 10 CSR 10-6, Air Pollution Control Program RSMo 643.

Effective Date: 6/1/99

Revision Dates:

127.25.8.2 Lead Mining Chat

Lead mining chat encapsulated in asphalt or concrete, may be used for highway construction. Refer to Missouri Standard Specifications for Highway Construction 1001.12. For additional information see EPG 127.25.8.2.1 Abrasives

Reason for Policy: MDH Health Study established to protect the health of workers and persons living along roadways. Air Pollution Control Law and Regulations 10 CSR 10-6, Air Pollution Control Program, RSMo 643, 40 CFR 260265 and 268; RSMo 260, 10 CSR 25-4.010, Hazardous Waste Management.

Effective Date: 6/1/99

Revision Dates:

127.25.8.2.1 Abrasives

The maximum aggregate size for abrasives shall not exceed 3/8 inch. Lead mining chat (within established limits) may be used for general maintenance purposes. See Missouri Standard Specifications for Highway Construction Sec 1001.12 for established lead limits in mining by-product aggregates.

For additional information see EPG 127.25.8.2 Lead Mining Chat.

Reason for Policy: Experience has shown that an aggregrate size larger that 3/8 in. is ineffective and contributes to broken windshields. Mine tailings may contain environmentally unsafe materials.

Effective Date: 6/1/99

Revision Dates: 6/17/03

127.25.8.3 Sewage Disposal System

Where a sewage system at a present maintenance site is being modified or when a sewage system is being designed for a new facility, the department shall consider the feasibility of connecting onto a publicly owned waste water treatment plant (POTW). If it is not economically feasible to connect to a POTW, an on-site sewage treatment system shall be considered. The required construction permit shall be obtained from the Missouri Department of Health or the Missouri Department of Natural Resources, Water Pollution Control Program, prior to construction. For additional information see EPG 127.25.8.3.1 Industrial and Domestic Waste Waters on Right of Way

Reason for Policy: RSMo 701.025 - 701.059 State Standards, RSMo 644 Water Pollution Control Program, Federal Clean Water Act 33 U.S.C. §§ 1251-1387

Effective Date: 6/1/99

Revision Dates:

127.25.8.3.1 Industrial and Domestic Waste Waters on Right of Way

Storm water and MDNR permitted industrial and domestic wastewater's are the only materials allowed to be discharged into the department drainage system. Other materials are considered effluents and will be handled as outlined:

  • Private homeowners are regulated by the Missouri Department of Health
a. Private Home owners are to be contacted in person and by letter requesting they take whatever action needed to stop the discharge.
b. If needed, a second letter shall be sent stating that legal action will be taken unless the effluent is stopped.
c. If no action is taken, the Department of Health is to be contacted. They will take whatever legal action is necessary.
  • Commercial businesses and industries are regulated by MDNR
a. The name, address and physical location of the business or industry discharging effluent to the right-of-way should be provided to the Environmental Compliance Coordinators (ECC) in the Central Office.
b. The ECC's will contact MDNR to determine if the commercial business or industry has a valid operating permit issued by MDNR to discharge effluent.
c. The ECC's will request MDNR to take whatever legal action necessary concerning any business or industry that does not have a valid permit from MDNR to discharge effluent to the highway right-of-way.

If a property owner requires assistance in containing effluent, they should be directed to the Department of Health for assistance.

For additional information see EPG 127.25.3.1 Rest Area Lagoon, EPG 127.25.8.3 Sewage Disposal System, and EPG 127.25.8.3.2 System Attachments by Others.

Reason for Policy: RSMo. 701

Effective Dates: 6/1/99

Revision Dates:

127.25.8.3.2 System Attachments by Others

Connections to the drainage system are prohibited unless approved by the district engineer. In situations where connections are permitted, plans and specifications are required and they must meet department specifications. If approved, the work shall be done under an approved excavation permit and/or a Missouri Highway and Transportation Commission Agreement. Attachments to bridges and large box culverts that qualify as bridges should be referred to the Bridge Division for review.

For additional information see EPG 127.25.8.3.1 Industrial and Domestic Waste Waters on Right of Way.

Reason for Policy: Protect MoDOT from possible litigation. Protect the current drainage system.

Effective Date: 6/1/99

Revision Dates:

127.25.8.4 Vehicle Placarding

Department vehicles transporting regulated quantities of hazardous waste shall be placarded. MoDOT is exempt from placarding asphalt distributors and product shipments.

Reason for Policy: 49 CFR 105-177 U.S.DOT, 10 CSR 25-6.010, Missouri Hazardous Waste Regulations

Effective Date: 6/1/99

Revision Dates:

127.25.8.5 Fugitive Dust

The department shall operate in a manner that minimizes and/or prevents fugitive dust from going beyond MoDOT property lines or off right of way. Dust from operations such as concrete sawing, crack and joint repair, street sweeping and roadway rotomilling shall be contained on department property.

Reason for Policy: 10 CSR 10-6.170, Air Pollution Control Program. Provide driving conditions free from dust obstructions.

Effective Date: 6/1/99

Revision Dates:

127.25.8.6 Vehicle Painting

A permit may be required for vehicle painting using power spray operations at maintenance buildings. When required, such permits shall be acquired prior to initiation of painting operations. Painting with a brush or touch up painting with an aerosol can does not required a permit.

Reason for Policy: 10 CSR 10-6.020, Air Pollution Control Program

Effective Date: 6/1/99

Revision Dates:

127.25.8.7 Environment Site Assessment

All properties to be disposed of or purchased shall have an environmental review conducted prior to selling or purchasing. Environmental reviews are conducted for the benefit of the department to identify existing or potential environmental liability that could be connected with a particular piece of property. Environmental reviews shall be conducted by an environmental specialist from the Support Center.

Reason for Policy: Reduce MoDOT liability.

Effective Date: 6/1/99

Revision Dates:

127.25.8.8 Salt Runoff

Measures shall be implemented that will eliminate damage to adjacent property from maintenance lot salt runoff. Salt and salt mix shall be placed under waterproof cover while it is stored. For additional information see EPG 127.25.8.8.1 Storage

Reason for Policy: RSMo 644 Water Pollution, Federal Clean Water Act 33 U.S.C. §§ 1251-1387. There have been a number of incidents in which salt, salt brine, and liquid calcium chloride runoff or spillage from the storage of salt has caused environmental damage. Storm water runoff from salt piles, brine and calcium storage tanks and mixing areas has proven to be detrimental to aquatic life and vegetation.

Effective Date: 6/1/99

Revision Dates:

127.25.8.8.1 Storage

Chemicals and stockpiles of treated abrasives are to be stored in a manner to prevent loss of material and prevent damage to State or private property. All bulk salt shall be stored inside covered storage structures. Asphalt pads are to be constructed under and in front of all storage facilities. Mixed materials shall be covered when not in use and between storm events.

For additional information see EPG 127.25.8.8 Salt Runoff.

Reason for Policy: Prevent loss of material and drainage to private property. Most salt runoff damage comes from mixed piles.

Effective Date: 6/1/99

Revision Dates: 6/17/03