Difference between revisions of "771.9 Temporary Bridge Deck Repair"
m (added link to 948) |
m |
||
| Line 8: | Line 8: | ||
|'''Additional Information''' | |'''Additional Information''' | ||
|- | |- | ||
| − | |[[:Category:948 Incident Response Plan and Emergency Response Management|948 Incident Response Plan and Emergency Response Management]] | + | |[[:Category:948 Incident Response Plan and Emergency Response Management|EPG 948 Incident Response Plan and Emergency Response Management]] |
|} | |} | ||
Holes in bridge decks should be safeguarded from traffic as soon as possible. Repairs should be completed with higher urgency than routing maintenance as weather permits. Consult the patching materials manufacturer’s guide for the weather limitations for use. | Holes in bridge decks should be safeguarded from traffic as soon as possible. Repairs should be completed with higher urgency than routing maintenance as weather permits. Consult the patching materials manufacturer’s guide for the weather limitations for use. | ||
Revision as of 08:53, 30 April 2014
| Code: R323 |
Temporary bridge deck repair is done to fill the holes in the deck to prevent the accumulation of dirt, debris and chlorides that will accelerate deck deterioration, to provide a smooth safe riding surface for the public and reduce the tire impact loading until permanent repairs can be made.
| Additional Information |
| EPG 948 Incident Response Plan and Emergency Response Management |
Holes in bridge decks should be safeguarded from traffic as soon as possible. Repairs should be completed with higher urgency than routing maintenance as weather permits. Consult the patching materials manufacturer’s guide for the weather limitations for use.
Materials
| Bridge Deck, Repair |
| Report 2002 |
| See also: Innovation Library |
Commercial patching materials have different abilities and characteristics. Examples are Instant Road Repair, UPM, Pavon and chips, etc. Hot mix asphalt can also be used when available.
General Note: Consult the manufacturer’s guidelines about preparation and placement. In general, a cleaner and drier repair area prior to filling will provide a better result.
