Difference between revisions of "Category:1115 Polyethylene Plastic Pipe Liner"
Jump to navigation
Jump to search
m (→1115.2 Report: updated link) |
m (updated link) |
||
| Line 3: | Line 3: | ||
|'''MGS Information''' | |'''MGS Information''' | ||
|- | |- | ||
| − | |[ | + | |[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject] |
|} | |} | ||
Revision as of 07:15, 16 October 2018
| MGS Information |
| Current General Services Specifications (MGS) By Subject |
This article establishes procedures for inspecting and reporting of polyethylene plastic pipe liners. The specification requirements are set forth in the bid request issued by General Services.
1115.1 Procedure
Field inspection is to follow the procedures laid out in EPG 1046 Pipe Liner.
1115.2 Report
The report of this material will be made in SiteManager following EPG 106.20 Reporting.
General Services may require a hard copy of the SiteManager report as proof of acceptance of this material. Inspectors should communicate with General Services to assure their payment procedures are satisfied and to ensure the materials requirements as satisfied on a per purchase order basis.
