Gallery of new files
Jump to navigation
Jump to search
This special page shows the last uploaded files.
- 751.40 Intermediate Bents - Integral Pile Cap Bents without Drop Panel - Reinforcement (Section Thru Bent).gif 3.133.113.216
12:38, 27 September 2007
640 × 388; 16 KB
- 751.40 Intermediate Bents - Integral Pile Cap Bents without Drop Panel - Reinforcement (Half Section).gif 3.133.113.216
12:37, 27 September 2007
645 × 378; 16 KB
- 751.40 Intermediate Bents - Integral Pile Cap Bents with Drop Panel - Reinforcement (Section Thru Drop Panel).gif 3.133.113.216
12:37, 27 September 2007
597 × 344; 13 KB
- 751.40 Intermediate Bents - Integral Pile Cap Bents with Drop Panel - Reinforcement (Half Section).gif 3.133.113.216
12:36, 27 September 2007
652 × 370; 13 KB
- 751.40 Intermediate Bents - Integral Pile Cap Bents with Drop Panel (Part Section Grade or VC).gif 3.133.113.216
12:31, 27 September 2007
356 × 233; 7 KB
- 751.40 Intermediate Bents - Integral Pile Cap Bents with Drop Panel (Part Section & Flat).gif 3.133.113.216
12:31, 27 September 2007
652 × 283; 11 KB
- 751.40 Intermediate Bents - Integral Pile Cap Bents with Drop Panel (Part Plans Square & Skewed).gif 3.133.113.216
12:30, 27 September 2007
615 × 290; 10 KB
- 751.40 Intermediate Bents - Integral Column Bents with Drop Panel (Section Thru Drop Panel).gif 3.133.113.216
12:30, 27 September 2007
606 × 300; 14 KB
- 751.40 Intermediate Bents - Integral Column Bents with Drop Panel (Part Sections AA).gif 3.133.113.216
12:30, 27 September 2007
570 × 209; 9 KB
- 751.40 Intermediate Bents - Integral Column Bents with Drop Panel (Part Section).gif 3.133.113.216
12:29, 27 September 2007
450 × 171; 6 KB
- 751.40 Intermediate Bents - Integral Column Bents with Drop Panel (Part Plans Square & Skewed).gif 3.133.113.216
12:29, 27 September 2007
627 × 346; 10 KB
- 751.40 End Bent (Pile Cap Plan (Skewed)).gif 3.133.113.216
12:29, 27 September 2007
679 × 326; 14 KB
- 751.40 End Bent (Integral Column Section BB).gif 3.133.113.216
12:29, 27 September 2007
218 × 142; 4 KB
- 751.40 End Bent (Integral Column Section AA).gif 3.133.113.216
12:28, 27 September 2007
227 × 141; 4 KB
- 751.40 End Bent (Integral Column Pinned Column).gif 3.133.113.216
12:28, 27 September 2007
364 × 275; 9 KB
- 751.40 End Bent (Integral Column Part Section).gif 3.133.113.216
12:28, 27 September 2007
551 × 286; 9 KB
- 751.40 Widen and Repair- Field Flange Splice- Bolted.gif 3.133.113.216
12:26, 27 September 2007
435 × 327; 4 KB
- 751.40 Widen and Repair- Field Flange Splice- Bolted Four Row Splice.gif 3.133.113.216
12:26, 27 September 2007
469 × 587; 8 KB
- 751.40 Widen and Repair- Field Flange Splice- Bolted- Flange Width Transition.gif 3.133.113.216
12:26, 27 September 2007
501 × 184; 8 KB
- 751.40 Widen and Repair Design Assumptions- Initial Girder Design.gif 3.133.113.216
12:26, 27 September 2007
799 × 251; 10 KB
- 751.40 Widen and Repair Design Assumptions- Horizontally Curved Girders Design Procedure.gif 3.133.113.216
12:25, 27 September 2007
459 × 184; 3 KB
- 751.40 Design Assumptions- Structure Length- Maximum Length for Continuous Steel.gif 3.133.113.216
12:25, 27 September 2007
650 × 291; 7 KB
- 751.40 Design Assumptions- Preliminary Analysis-Moments Diagram.gif 3.133.113.216
12:25, 27 September 2007
521 × 112; 3 KB
- 751.40 Design Assumptions- Heat Curved Girders- Section Modulus.gif 3.133.113.216
12:25, 27 September 2007
476 × 90; 2 KB
- 751.40 Design Assumptions- Heat Curved Girders- Design Example Section A-A.gif 3.133.113.216
12:25, 27 September 2007
199 × 241; 3 KB
- 751.40 Design Assumptions- Heat Curved Girders- Design Example Section 2.gif 3.133.113.216
12:25, 27 September 2007
258 × 112; 2 KB
- 751.40 Design Assumptions- Heat Curved Girders- Design Example Plan View.gif 3.133.113.216
12:25, 27 September 2007
605 × 264; 4 KB
- 751.40 Design Assumptions- Design Stress Investigation- Plate Girder.gif 3.133.113.216
12:25, 27 September 2007
620 × 392; 5 KB
- 751.40 wf bm spans-flange plates-details of flange plates at int bents2.gif 3.133.113.216
11:54, 27 September 2007
663 × 256; 12 KB
- 751.40 wf bm spans-flange plates-details of flange plates at int bents1.gif 3.133.113.216
11:54, 27 September 2007
675 × 250; 13 KB
- 751.40 Widen and Repair Design Assumptions- Shear Connectors Spacing 2 2 1.gif 3.133.113.216
11:53, 27 September 2007
640 × 464; 19 KB
- 751.40 Widen and Repair Design Assumptions- PCP on Steel Shear Connector.gif 3.133.113.216
11:53, 27 September 2007
603 × 546; 17 KB
- 751.40 Widen and Repair Design Assumptions- PCP on Steel Shear Connector- B.gif 3.133.113.216
11:53, 27 September 2007
635 × 306; 14 KB
- 751.40 general superstructure-slab cantilever section.gif 3.133.113.216
11:44, 27 September 2007
397 × 211; 4 KB
- 751.40 general superstructure-sections thru slab showing negative moment reinforcement.gif 3.133.113.216
11:44, 27 September 2007
569 × 146; 7 KB
- 751.40 general superstructure-panels - square ends - prestressed structures.gif 3.133.113.216
11:44, 27 September 2007
533 × 235; 11 KB
- 751.40 general superstructure-panels - square ends - int end bent - steel structure.gif 3.133.113.216
11:44, 27 September 2007
254 × 232; 5 KB
- 751.40 general superstructure-panels - square ends - int bent - steel structure.gif 3.133.113.216
11:43, 27 September 2007
274 × 228; 7 KB
- 751.40 general superstructure-panels - square ends - end bent - steel structure.gif 3.133.113.216
11:43, 27 September 2007
283 × 232; 7 KB
- 751.40 general superstructure-panels - skewed ends - prestressed structures.gif 3.133.113.216
11:43, 27 September 2007
246 × 226; 4 KB
- 751.40 general superstructure-panels - skewed ends - int end bent - steel structure.gif 3.133.113.216
11:43, 27 September 2007
215 × 159; 3 KB
- 751.40 general superstructure-panels - skewed ends - int bent exp gap - steel structure.gif 3.133.113.216
11:43, 27 September 2007
220 × 167; 4 KB
- 751.40 general superstructure-panels - skewed ends - end bent - steel structure.gif 3.133.113.216
11:42, 27 September 2007
236 × 156; 4 KB