Talk:106.4 Plant Inspections

From Engineering_Policy_Guide
Revision as of 10:05, 1 March 2012 by Brookl (talk | contribs) (New page: The First sentence in 106.4.2.6 should be modified to allow for the Contractor/Supplier to calibrate the equipment. Recomened working is shown below. See supporting data below: Current wo...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The First sentence in 106.4.2.6 should be modified to allow for the Contractor/Supplier to calibrate the equipment. Recomened working is shown below. See supporting data below:

Current wording: "106.4.2.6 Bituminous distributors. The calibration of all distributors will be performed by district Construction and Materials personnel."

Proposed wording: "106.4.2.6 Bituminous distributors. The calibration of all distributors will be approved by the engineer prior to use."


From: Joseph W Schroer/SC/MODOT To: Lawrence R Brooks/D6/MODOT Cc: Dennis G Bryant/SC/MODOT@MODOT, Mitchell R Huskey/D6/MODOT@MODOT Date: 03/01/2012 09:10 AM Subject: Re: Distributor Calibration Question


Dennis and I were thinking the same thing. That is that the distributor needs to be calibrated but not necessarily by us. As with the plants, the contractor should have the calibration performed and have it available for our inspection.

Joe

From: Lawrence R Brooks/D6/MODOT To: Dennis G Bryant/SC/MODOT@MODOT, Joseph W Schroer/SC/MODOT@MODOT Date: 02/29/2012 08:14 AM Subject: Distributor Calibration Question

I thought we had direction awhile ago not to perform distributor calibrations anymore? I received a request for the old forms we used when we were calibrating them, and followed up with checking the EPG and Spec book.

Retrieved from "https://epg.modot.org/index.php?title=Talk:106.4_Plant_Inspections&oldid=28095"