Gallery of new files
Jump to navigation
Jump to search
This special page shows the last uploaded files.
- 751.40 general superstructure-longitudinal sections-point of rotation of bearings-flat plate bearing.gif 18.217.26.216
15:17, 28 September 2007
295 × 135; 3 KB
- 751.40 general superstructure-longitudinal sections-point of rotation of bearings-type c bearing grade 4% and greater.gif 18.217.26.216
15:17, 28 September 2007
235 × 185; 3 KB
- 751.40 general superstructure-longitudinal sections-no expansion device at end bent(not on grade) 1.gif 18.217.26.216
15:16, 28 September 2007
606 × 317; 13 KB
- 751.40 general superstructure-Geometrics for Hanger Beam Connections for Bridges on Sag Vertical Curves.gif 18.217.26.216
15:16, 28 September 2007
566 × 362; 12 KB
- 751.40 general superstructure-Geometrics for Hanger Beam Connections for Bridges on Crown Vertical Curves.gif 18.217.26.216
15:16, 28 September 2007
575 × 350; 12 KB
- 751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Crown Vertical Curves.gif 18.217.26.216
15:15, 28 September 2007
585 × 354; 14 KB
- 751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Crown Vertical Curves1.gif 18.217.26.216
15:15, 28 September 2007
573 × 362; 15 KB
- 751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Symmetrical Vertical Curves.gif 18.217.26.216
15:14, 28 September 2007
574 × 351; 12 KB
- 751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Sag Vertical Curves2.gif 18.217.26.216
15:14, 28 September 2007
577 × 338; 12 KB
- 751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Straight, Plus Grades.gif 18.217.26.216
15:13, 28 September 2007
584 × 397; 16 KB
- 751.40 general superstructure-Geometrics for Hinged Beam Connections for Bridges on Sag Vertical Curves1.gif 18.217.26.216
15:13, 28 September 2007
571 × 396; 15 KB
- 751.40 Slab Drain Details (Details for Raising Scuppers) Plan of Grate Support and Scupper Extension.gif 18.217.26.216
15:12, 28 September 2007
407 × 318; 3 KB
- 751.40 Replacement of Existing Curb at End of Wing (Integral End Bents) Anchor Systems at Section CC.gif 18.217.26.216
15:11, 28 September 2007
212 × 169; 4 KB
- 751.40 Replacement of Existing Curb (Safety Barrier Curb on Wing) Section Thru Curb Optional Anchoring System.gif 18.217.26.216
15:10, 28 September 2007
463 × 327; 7 KB
- 751.40 Replacement of Existing Curb (Safety Barrier Curb on Slab) Section Thru Curb Optional Anchoring System.gif 18.217.26.216
15:09, 28 September 2007
449 × 306; 9 KB
- 751.40 concrete wearing surface-typical elevation of exist curb outlet showing limits of epoxy seal.gif 18.217.26.216
14:59, 28 September 2007
417 × 282; 5 KB
- 751.40 Concrete Wearing Surface (Low Slymp, Silica Fume, Latex or Asphaltic) Typ Section of Flat Plate Exp Device.gif 18.217.26.216
14:43, 28 September 2007
570 × 303; 11 KB
- 751.31 Open Concrete Int Bents and Piers- Details- Optional Section for Column- Web Beam Joint- Plan.gif 18.217.26.216
14:11, 28 September 2007
590 × 136; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Details- Optional Section for Column- Web Beam Joint- Elevations.gif 18.217.26.216
14:11, 28 September 2007
633 × 264; 5 KB
- 751.31 Open Concrete Int Bents and Piers- Details- Optional Section for Column- Web Beam Joint- Detail A.gif 18.217.26.216
14:11, 28 September 2007
463 × 289; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Collision Wall Section B-B Track on Both Sides.gif 18.217.26.216
14:10, 28 September 2007
281 × 317; 5 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Collision Wall Section A-A Track on One Side.gif 18.217.26.216
14:09, 28 September 2007
284 × 340; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Collision Wall Elevation Track on One Side.gif 18.217.26.216
14:09, 28 September 2007
358 × 350; 8 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Collision Wall Elevation Track on Both Sides.gif 18.217.26.216
14:09, 28 September 2007
357 × 356; 7 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Tie Beam- Seismic Zone 1- Part Elevation Change in Diameter.gif 18.217.26.216
14:08, 28 September 2007
432 × 375; 10 KB
- 751.31 Open Concrete Int Bents and Piers-Design-Column Charts Plan View.gif 18.217.26.216
14:07, 28 September 2007
222 × 164; 2 KB
- 751.22 Non Integral Intermediate Bent Diaphragm with Finger Plate Exp Device Reinf Closed Diaphragm.gif 18.217.26.216
13:31, 28 September 2007
464 × 285; 9 KB
- 751.22 Closed Int Bent Diaphragms Reinf Change in Height at Fixed Bents Part Section AA Thru Diaphragm.gif 18.217.26.216
13:29, 28 September 2007
603 × 558; 22 KB
- 751.14 details thru bevel plate for int web stiffener-brg stiffener-and int diaphragm connection plates.gif 18.217.26.216
13:17, 28 September 2007
255 × 260; 3 KB
- 751.14 critical dimensions for checking thread exclusion in .875in dia high strength bolted connections.gif 18.217.26.216
13:16, 28 September 2007
344 × 230; 6 KB
- 751.13 Finger Plate Expansion Joint- Median Barrier Curb- Elev at Beveled Curb Bent Plate- Section C-C.gif 18.217.26.216
13:07, 28 September 2007
137 × 120; 2 KB
- 751.13 Finger Plate Expansion Joint- Int Bent- Part Section Thru Expansion Device- Prestress to Steel.gif 18.217.26.216
13:07, 28 September 2007
674 × 433; 25 KB
- 751.13 Finger Plate Expansion Joint- Int Bent- Part Section Thru Expansion Device- Prestress to Steel Notes.gif 18.217.26.216
13:06, 28 September 2007
261 × 140; 4 KB
- 751.31 Open Concrete Int Bents and Piers- Columns Hinged-Fixed Condition.gif 18.217.26.216
11:26, 28 September 2007
194 × 209; 3 KB
- 751.31 Open Concrete Int Bents and Piers- Collision Walls Two Track.gif 18.217.26.216
11:26, 28 September 2007
510 × 354; 13 KB
- 751.31 Open Concrete Int Bents and Piers- Boundary Conditions for columns-Top Image.gif 18.217.26.216
11:26, 28 September 2007
275 × 183; 3 KB
- 751.10 plan view of bridge showing equivalent strip width for continuous and discontinuous slab s.gif 18.217.26.216
11:26, 28 September 2007
515 × 441; 8 KB
- 751.31 Open Concrete Int Bents and Piers- Web Beam Supporting Beam.gif 18.217.26.216
11:16, 28 September 2007
467 × 268; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Typical Intermediate Bent.gif 18.217.26.216
11:16, 28 September 2007
580 × 160; 5 KB
- 751.31 Open Concrete Int Bents and Piers- Tie Beam.gif 18.217.26.216
11:16, 28 September 2007
467 × 268; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Tie Beam with Changing Column Diameter.gif 18.217.26.216
11:15, 28 September 2007
467 × 268; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Telescoping Columns.gif 18.217.26.216
11:15, 28 September 2007
275 × 188; 2 KB
- 751.31 Open Concrete Int Bents and Piers- Section Views for Intermediate Bent with Web Beam.gif 18.217.26.216
11:15, 28 September 2007
467 × 302; 8 KB
- 751.31 Open Concrete Int Bents and Piers- Rigid Frame.gif 18.217.26.216
11:15, 28 September 2007
467 × 268; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Web Beam Variable Diameter Column.gif 18.217.26.216
11:14, 28 September 2007
286 × 247; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Web Beam Part Section.gif 18.217.26.216
11:14, 28 September 2007
227 × 277; 6 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Web Beam Part Elevation.gif 18.217.26.216
11:14, 28 September 2007
493 × 345; 13 KB
- 751.31 Open Concrete Int Bents and Piers- Reinforcement- Transverse Beam Steps Over 3 inches.gif 18.217.26.216
11:13, 28 September 2007
494 × 285; 6 KB