1028.5 Laboratory Testing Guidelines for Sec 1028

From Engineering_Policy_Guide
Revision as of 09:42, 21 February 2008 by Smithk (talk | contribs) (article construction)
Jump to navigation Jump to search

This article establishes procedures for Laboratory testing and reporting of concrete drain tile. Refer to Sec 1028 for MoDOT's specifications.

1028.5.1 Procedure

Tests consist of absorption only. Samples shall be tested in accordance with AASHTO T280. Test results and calculations shall be recorded through SiteManager.

1028.5.2 Sample Record

The sample record shall be completed in SiteManager, as described in Automation Section 3510, and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in 106.9 Reporting Test Results, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Retrieved from "https://epg.modot.org/index.php?title=1028.5_Laboratory_Testing_Guidelines_for_Sec_1028&oldid=17060"