Difference between revisions of "133.5 Operator’s Guide for Anti-Icing"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (Per TP, updated Major Highway System map)
 
(14 intermediate revisions by the same user not shown)
Line 15: Line 15:
 
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.5 Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities)|Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities)]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.5 Proportions for preparing sodium chloride solution from commercial grade salt.pdf|Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities)]]
 
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.5 Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities)|Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities)]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.5 Proportions for preparing sodium chloride solution from commercial grade salt.pdf|Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities)]]
 
|-
 
|-
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.1 Light Snow Storm Weather Event|Light Snow Storm Weather Event]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.1 Light Snow Storm Weather Event.pdf|Light Snow Storm Weather Event]]
+
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.1 Type 5 Winter Event: Frost, Flurries, Freezing Fog, Blowing Snow and Refreeze|Type 5 Winter Event:  Frost, Flurries, Freezing Fog, Blowing Snow and Refreeze]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.1 Type 5.doc|Type 5 Winter Event]]
 
|-
 
|-
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.2 Light Snow with Period(s) of Moderate or Heavy Snow Weather Event | Light Snow with Period(s) of Moderate or Heavy Snow Weather Event]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.2 Light Snow with Period(s) of Moderate or Heavy Snow Weather Event.pdf | Light Snow with Period(s) of Moderate or Heavy Snow Weather Event]]
+
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.2 Type 4 Winter Event: Dusting to 1 in. of snow, sleet, or other frozen precipitation|Type 4 Winter Event: Dusting to 1 in. of snow, sleet, or other frozen precipitation]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.2 Type 4.doc|Type 4 Winter Event]]
 
|-
 
|-
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.3 Moderate or Heavy Snow Storm Weather Event |Moderate or Heavy Snow Storm Weather Event ]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.3 Moderate or Heavy Snow Storm Weather Event.pdf |Moderate or Heavy Snow Storm Weather Event ]]
+
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.3 Type 3 Winter Event: 1 – 6 in. of snow/frozen precipitation in 24 hours OR a trace to 1/2 in. of ice|Type 3 Winter Event:  1 – 6 in. of snow/frozen precipitation in 24 hours OR a trace to 1/2 in. of ice ]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.3 Type 3.doc|Type 3 Winter Event]]
 
|-
 
|-
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.4 Frost or Black Ice Weather Event |Frost or Black Ice Weather Event]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.4 Frost or Black Ice Weather Event.pdf |Frost or Black Ice Weather Event]]
+
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.4 Type 2 Winter Event: 6 – 12 in. of snow in 24 hours OR ½ to ¾ in. of ice|Type 2 Winter Event:  6 – 12 in. of snow in 24 hours OR ½ to ¾ in. of ice]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.4 Type 2.doc|Type 2 Winter Event]]
 
|-
 
|-
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.5 Freezing Rain Storm Weather Event |Freezing Rain Storm Weather Event ]] ||style="background:#FFFFCC"|[[media:Table 133.5.3.6.5 Freezing Rain Storm Weather Event.pdf |Freezing Rain Storm Weather Event ]]
+
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.5 Type 1 Winter Event: More than 12 inches of snow in 24 hours OR more than ¾ inch of ice|Type 1 Winter Event:  More than 12 inches of snow in 24 hours OR more than ¾ inch of ice]] ||style="background:#FFFFCC"|[[media:Table 133.5.3.6.5 Type 1.doc|Type 1 Winter Event]]
|-
 
|[[133.5 Operator’s Guide for Anti-Icing#Table 133.5.3.6.6 Sleet Storm Weather Event| Sleet Storm Weather Event ]] ||style="background:#FFFFCC"|[[media: Table 133.5.3.6.6 Sleet Storm Weather Event.pdf| Sleet Storm Weather Event ]]
 
 
|}
 
|}
  
Line 32: Line 30:
 
Anti-icing is the snow and ice control practice of preventing the development of a bond between snow and/or ice and the pavement surface with the timely application of salt. Applying the right amount of salt at the right time will make snow removal operations more efficient and produce safer driving conditions during winter storms.  
 
Anti-icing is the snow and ice control practice of preventing the development of a bond between snow and/or ice and the pavement surface with the timely application of salt. Applying the right amount of salt at the right time will make snow removal operations more efficient and produce safer driving conditions during winter storms.  
  
This article provides guidelines for the application of salt to the roadway for a variety of winter storm conditions. The timing and application rates were developed under the SHRP/FHWA Research Program, in which MoDOT participated. Many Maintenance personnel who have tested these procedures have found them to be valuable in their winter maintenance operations. The statewide implementation of this technology will help produce safer driving conditions on MoDOT’s continuous treatment routes during winter months.  
+
This article provides guidelines for the application of salt to the roadway for a variety of winter storm conditions. The timing and application rates were developed under the SHRP/FHWA Research Program, in which MoDOT participated. Many Maintenance personnel who have tested these procedures have found them to be valuable in their winter maintenance operations. The statewide implementation of this technology will help produce safer driving conditions on MoDOT’s continuous operations routes during winter months.  
  
 
==133.5.1 Operations Guide for Maintenance Field Personnel==
 
==133.5.1 Operations Guide for Maintenance Field Personnel==
  
This is a guide to highway anti-icing operations for Maintenance field personnel. Its purpose is to recommend maintenance actions for ''preventing'' the formation or development of packed and bonded snow or bonded ice on the first priority '''continuous treatment routes''' during a variety of winter weather events. It is intended to complement the decision-making and management practices of a systematic anti-icing program so that '''continuous treatment routes''' can be efficiently maintained in the best possible condition.  
+
This is a guide to highway anti-icing operations for Maintenance field personnel. Its purpose is to recommend maintenance actions for ''preventing'' the formation or development of packed and bonded snow or bonded ice on the '''continuous operations routes''' during a variety of winter weather events. It is intended to complement the decision-making and management practices of a systematic anti-icing program so that '''continuous operations routes''' can be efficiently maintained in the best possible condition.  
  
 
These guidelines are based on the results of four years of anti-icing field testing conducted by 15 state DOTs, including MoDOT, and is supported by the Strategic Highway Research Program (SHRP) and the Federal Highway Administration (FHWA). Since then, it has been augmented with many additional years of anti-icing experience in different parts of our state.  
 
These guidelines are based on the results of four years of anti-icing field testing conducted by 15 state DOTs, including MoDOT, and is supported by the Strategic Highway Research Program (SHRP) and the Federal Highway Administration (FHWA). Since then, it has been augmented with many additional years of anti-icing experience in different parts of our state.  
  
[[133.5 Operator’s Guide for Anti-Icing#133.5.3.6 Tables for First Priority Continuous Treatment Routes|Guidance for anti-icing operations during six winter weather events]] is available. The six events are:  
+
[[133.5 Operator’s Guide for Anti-Icing#133.5.3.6 Tables for Continuous Operations Routes|Guidance for anti-icing operations during five winter weather events]] is available. The five events are:  
 +
 
 +
:* Type 5 Winter Event:  Frost, flurries, freezing fog, blowing snow & refreeze
 +
:* Type 4 Winter Event:  Dusting to 1 in. of snow, sleet or other frozen precipitation
 +
:* Type 3 Winter Event:  1 – 6 in. of snow/frozen precipitation in 24 hours OR a trace to ½ in. of ice
 +
:* Type 2 Winter Event:  6 – 12 in. of snow in 24 hours OR ½ to ¾ in. of ice
 +
:* Type 1 Winter Event:  More than 12 in. of snow in 24 hours OR more than ¾ in. of ice
  
:* light snow storm
 
:* light snow storm with period(s) of moderate or heavy snow
 
:* moderate or heavy snow storm
 
:* frost or black ice
 
:* freezing rain storm
 
 
{|style="padding: 0.3em; margin-left:15px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="300px" align="right"  
 
{|style="padding: 0.3em; margin-left:15px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="300px" align="right"  
 
|-
 
|-
Line 53: Line 52:
 
|[http://wwwi.dot.missouri/intranet/hr/hred/documents/MoDOTSnowAcademyparticipantbook.pdf MoDOT Snow Academy Official Guide, Participant's Manual] and [http://wwwi.dot.missouri/intranet/hr/hred/roadeo.htm Snow Academy Website]
 
|[http://wwwi.dot.missouri/intranet/hr/hred/documents/MoDOTSnowAcademyparticipantbook.pdf MoDOT Snow Academy Official Guide, Participant's Manual] and [http://wwwi.dot.missouri/intranet/hr/hred/roadeo.htm Snow Academy Website]
 
|}
 
|}
:* sleet storm
 
  
 
The tables suggest the appropriate maintenance action to take during initial and follow-up anti-icing operations for a given precipitation or icing event. Each action is defined for a range of pavement temperatures and an associated temperature trend. For some events the operation is dependent not only on the pavement temperature and trend, but also upon the pavement surface or the traffic condition at the time of the action. Many of the maintenance actions involve the application of salt in either a dry solid, pre-wetted or brine (liquid) form. Pre-wetted solid and brine are the two primary forms on which we need to concentrate. Application rates are given for each form where appropriate. '''These are suggested rates and should be adjusted, if necessary, to achieve the effectiveness for local conditions.'''
 
The tables suggest the appropriate maintenance action to take during initial and follow-up anti-icing operations for a given precipitation or icing event. Each action is defined for a range of pavement temperatures and an associated temperature trend. For some events the operation is dependent not only on the pavement temperature and trend, but also upon the pavement surface or the traffic condition at the time of the action. Many of the maintenance actions involve the application of salt in either a dry solid, pre-wetted or brine (liquid) form. Pre-wetted solid and brine are the two primary forms on which we need to concentrate. Application rates are given for each form where appropriate. '''These are suggested rates and should be adjusted, if necessary, to achieve the effectiveness for local conditions.'''
Line 65: Line 63:
 
'''Brine.''' Water saturated with common salt (NaCl), also liquid salt or liquid chemical.  
 
'''Brine.''' Water saturated with common salt (NaCl), also liquid salt or liquid chemical.  
  
'''Continuous Treatment Routes.''' All [[:Category:123 Federal-Aid Highway Program#123.1.1 FHWA Oversight - National Highway System|National Highway System (NHS) routes]], all remaining arterial (RA) routes, and all collector routes over 1700 AADT. These routes receive a continuous application of snow and ice control treatments over the entire length of the route.  
+
'''Continuous Operations Routes.''' This system includes all [[media:144 Major Highway System 2022.pdf|major highways]], minor highways with traffic volumes of 2,500 ADT or greater and other urban and community routes designated by the district in consultation with the Maintenance Division.  This also includes all designated incident bypass routes.
 +
 
 +
These routes will receive plowing and application of snow and ice control treatments on an as needed basis, throughout the storm until all lanes are restored to a near normal condition.  
  
 
'''Dew Point.''' The temperature that a vapor begins to condense.  
 
'''Dew Point.''' The temperature that a vapor begins to condense.  
Line 85: Line 85:
 
'''Slush.''' Accumulation of snow that lies on an impervious base and is saturated with water in excess of its freely drained capacity. It will not support any weight when stepped or driven on but will "squish" until the base support is reached.  
 
'''Slush.''' Accumulation of snow that lies on an impervious base and is saturated with water in excess of its freely drained capacity. It will not support any weight when stepped or driven on but will "squish" until the base support is reached.  
  
'''Spread Rate.''' The salt application rate in either the solid or liquid form. For solid applications it is simply the weight of the salt applied per lane mile. For liquid applications it is the volume (gallons) of brine applied per lane mile.
+
'''Spread Rate.''' The salt application rate in either the solid or liquid form. For solid applications it is simply the weight of the salt applied per lane mile. For liquid applications it is the volume (gallons) of brine applied per lane mile.
  
 
==133.5.3 Tables==
 
==133.5.3 Tables==
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"
 
|-
 
|style="background:#FFFFCC"|[[media: Table 133.5.3.1 How to Use Liquid Anti-Icers.pdf |Printable pdf of "How to Use Liquid Anti-Icers"]]
 
|}
 
 
  
 
===<center>Table 133.5.3.1 How to Use Liquid Anti-Icers</center> ===
 
===<center>Table 133.5.3.1 How to Use Liquid Anti-Icers</center> ===
Line 272: Line 267:
 
|}
 
|}
  
===133.5.3.6 Tables for First Priority Continuous Treatment Routes===
+
===133.5.3.6 Tables for Continuous Operations Routes===
  
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
|-
 
|-
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.1 Light Snow Storm Weather Event.pdf |Printable pdf of "Light Snow Storm Weather Event"]]
+
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.1 Type 5.doc|Printable file for "Type 5 Winter Event"]]
 
|}  
 
|}  
  
  
====<center>Table 133.5.3.6.1 Light Snow Storm Weather Event</center>====
+
====<center>Table 133.5.3.6.1 Type 5 Winter Event: Frost, Flurries, Freezing Fog, Blowing Snow and Refreeze</center>====
  
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+'' First Priority Continuous Treatment Routes''
+
|+''Continuous Operations Routes''
! style="background:#ccffcc" rowspan="3"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="4"| Initial Operation!! style="background:#ccffcc" colspan="3"|Subsequent Operations!! style="background:#ccffcc" rowspan="3"| Comments
+
! style="background:#ccffcc" rowspan="3"|Pavement Temperature Range and Trend!!style="background:#ccffcc" rowspan="3"|Traffic Condition|| style="background:#ccffcc" colspan="3"| Initial Operation!! style="background:#ccffcc" colspan="3"|Subsequent Operations!! style="background:#ccffcc" rowspan="3" width=25%| Comments
 
|-
 
|-
! style="background:#ccffcc" rowspan="2"|Pavement surface at time of initial operation!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates!!style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates
+
! style="background:#ccffcc" rowspan="2"|Maintenance Action!! style="background:#ccffcc" colspan="2"|Spread Rates!! style="background:#ccffcc" rowspan="2"|Maintenance Action!!style="background:#ccffcc" colspan="2"|Spread Rates
 
|-
 
|-
!style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mail)!! style="background:#ccffcc"|Brine (gal/lane-mile)!! style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mile)!!style="background:#ccffcc"|Brine (gal/lane-mile)
+
!style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mile)!! style="background:#ccffcc"|Brine (gal/lane-mile)!! style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mile)!!style="background:#ccffcc"|Brine (gal/lane-mile)
 
|-
 
|-
|'''Above 32º F,''' steady or rising|| Dry, wet, slush or light snow cover|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- ||'''1)''' Monitor pavement temperature closely for drops toward 32º F and below, '''2)''' Treat icy patches if needed with pre-wetted solid salt at 100 lb/lane-mile; plow if needed
+
|'''Above 32º F,''' steady or rising|| Any level|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- ||'''1)''' Monitor pavement temperature closely; begin treatment if starts to fall to 32ºF and below and is at or below dew point.
 
|-
 
|-
| rowspan="2"|'''Above 32º F,''' 32º F or below is imminent;  ALSO '''15 to 32º F,''' remaining in range||Dry||Apply brine or pre-wetted solid salt|| align="center"|100|| align="center"|44|| rowspan="2"|Plow as needed, reapply liquid or solid chemical when needed|| rowspan="2" align="center"|100|| rowspan="2" align="center"| 44||rowspan="2"|''' 1)''' Applications will need to be more frequent at lower temperatures and higher snowfall rates , '''2)''' It is not advisable to apply a straight brine at the indicated spread rate when the pavement temperature drops below 20º F , '''3)''' Do not apply brine onto heavy snow accumulation or packed snow
+
| rowspan="2"|'''28º F to 32º F,''' remaining in range or falling to 32º F or below, ''and'' equal to or below dew point||Traffic rate less than 100 vehicles per hr||Apply brine or pre-wetted solid salt|| align="center"|25-65|| align="center"|11-28|| Reapply pre-wetted solid salt as needed|| align="center"|25-65|| align="center"| - || rowspan="2"|''' 1)''' Monitor pavement closely; if pavement becomes wet or if thin ice forms, reapply salt at higher indicated rate.
 +
'''2)''' Do not apply brine on ice so thick that the pavement cannot be seen.
 
|-
 
|-
|Wet, slush or light snow cover||Apply liquid or solid salt|| align="center"|100|| align="center"|44
+
|Traffic rate greater than 100 vehicles per hr||Apply brine or pre-wetted solid salt|| align="center"|25-65|| align="center"|11-28||Reapply brine pre-wetted solid salt as needed|| align="center"|25-65|| align="center"| 11-28
 
|-
 
|-
|'''0 to 15º F,''' remaining in range||Dry, wet, slush or light snow cover||Apply pre-wetted solid chemical|| align="center"|200|| align="center"| - ||Plow as needed; reapply pre-wetted solid chemical when needed|| align="center"|200|| align="center"| - || '''1)''' Abrasives may be added to the salt to enhance traction at colder temperatures , '''2)''' Liquid calcium chloride may be used for pre-wetting solid salt at colder temperatures
+
|'''20º to 28º F,''' remaining in range ''and'' equal to or below dew point||Any level||Apply brine or pre-wetted solid salt|| align="center"|65-130|| align="center"|28-57 ||Reapply brine pre-wetted solid salt as needed|| align="center"|65-130|| align="center"|28-57 || '''1)''' Monitor pavement closely; if thin ice forms, reapply salt at higher indicated rate.
 +
'''2)''' Applications will need to be more frequent at higher levels of condensation; if traffic volumes are not enough to disperse condensation, it may be necessary to increase frequency.
 +
 
 +
'''3)''' It is not advisable to apply a brine at the indicated spread rate when the pavement temperature drops below 20ºF.
 
|-
 
|-
|'''Below 0º F,''' steady or falling||Dry or light snow cover||Plow as needed|| align="center"| - || align="center"| - ||Plow and apply salt/abrasive mix as needed|| align="center"| - || align="center"| - ||'''1)''' If pavement becomes slick apply salt/abrasive mix to enhance traction. Salt will have limited melting power in this temperature range, '''2)''' Pre-wet salt/abrasive mix with liquid calcium chloride.
+
|'''10º to 20º F,''' remaining in range ''and'' equal to or below dew point||Any level||Apply  pre-wetted solid salt|| align="center"|130-200 || align="center"| - ||Reapply pre-wetted solid salt as needed|| align="center"|130-200 || align="center"| - ||'''1)''' Monitor pavement closely; if thin ice forms, reapply salt at higher indicated rate.
 +
'''2)''' Applications will need to be more frequent at higher levels of condensation; if traffic volumes are not enough to disperse condensation, it may be necessary to increase frequency.
 
|-
 
|-
| colspan="9"| '''Salt Applications.''' (1) Time initial and subsequent chemical applications to ''prevent'' deteriorating conditions or development of packed and bonded snow. (2) Apply salt ahead of traffic rush periods occurring during storm.
+
|'''Below 0º F,''' steady or falling||Any level||Apply abrasives|| align="center"| - || align="center"| - ||Apply abrasives as needed|| align="center"| - || align="center"| - ||'''1)''' Monitor pavement closely, salt will have limited melting power in this temperature range.
 +
'''2)''' Liquid calcium chloride may be used for pre-wetting salt/abrasive mix at colder temperatures.
 
|-
 
|-
| colspan="9"|'''Plowing.''' If needed, ''plow before salt applications'' so that excess snow, slush, or ice is removed and pavement is wet, slushy, or lightly snow covered when treated.
+
| colspan="9"| '''''Notes:''  TIMING.''' '''1)''' Conduct initial operation in advance of freezing.  Apply brine up to 3 hr in advance.  Use longer advance times in this range to effect drying when traffic volume is low.  Apply pre-wetted solid salt 1 to 2 hr in advance.  '''2)''' In the absence of precipitation, brine at 33 gal/lane-mi has been successful in preventing bridge deck icing when placed up to 4 days before freezing on higher volume roads and 7 days before on lower volume roads.  
 
|}
 
|}
  
Line 308: Line 309:
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
|-
 
|-
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.2 Light Snow with Period(s) of Moderate or Heavy Snow Weather Event.pdf |Printable pdf of "Light Snow with Period(s) of Moderate or Heavy Snow Weather Event"]]
+
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.2 Type 4.doc|Printable file for "Type 4 Winter Event"]]
|}
 
 
 
  
 +
|}
  
====<center>Table 133.5.3.6.2 Light Snow with Period(s) of Moderate or Heavy Snow Weather Event</center>====
+
====<center>Table 133.5.3.6.2 Type 4 Winter Event: Dusting to 1 in. of snow, sleet, or other frozen precipitation</center>====
  
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+ ''First Priority Continuous Treatment Routes''
+
|+ ''Continuous Operations Routes''
! style="background:#ccffcc" rowspan="4"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="4"| Initial Operation!! style="background:#ccffcc" colspan="5"|Subsequent Operations!! style="background:#ccffcc" rowspan="4"| Comments
+
! style="background:#ccffcc" rowspan="3"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="4"| Initial Operation!! style="background:#ccffcc" colspan="3"|Subsequent Operations!! style="background:#ccffcc" rowspan="3" width=25%| Comments
 
|-
 
|-
! style="background:#ccffcc" rowspan="3"|Pavement surface at time of initial operation!! style="background:#ccffcc" rowspan="3"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates!! style="background:#ccffcc" rowspan="3"|Maintenance action!! style="background:#ccffcc" colspan="4"|Salt spread rates
+
! style="background:#ccffcc" rowspan="2"|Pavement surface at time of initial operation!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates
 
|-
 
|-
!style="background:#ccffcc" rowspan="2"|Pre-wetted solid salt (lb/lane-mail)!! style="background:#ccffcc" rowspan="2"|Brine (gal/lane-mile)!! style="background:#ccffcc" colspan="2"|Pre-wetted solid salt (lb/lane-mile)!! style="background:#ccffcc" colspan="2"|Brine (gal/lane-mile)
+
!style="background:#ccffcc" |Pre-wetted solid salt (lb/lane-mile)!! style="background:#ccffcc" |Brine (gal/lane-mile)!! style="background:#ccffcc" |Pre-wetted solid salt (lb/lane-mile)!! style="background:#ccffcc" |Brine (gal/lane-mile)
 
|-
 
|-
! style="background:#ccffcc"|Light snow!! style="background:#ccffcc"|Heavier snow!! style="background:#ccffcc"|Light snow!! style="background:#ccffcc"|Heavier snow!!
+
|'''Above 32º F,''' steady or rising|| Dry, wet, slush or light snow cover|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- || '''1)''' Monitor pavement temperature closely for drops toward 32º F and below.
 +
'''2)''' Treat icy patches if needed with pre-wetted solid salt at 100 lb/lane-mile; plow if needed.
 
|-
 
|-
|'''Above 32º F,''' steady or rising|| Dry, wet, slush or light snow cover|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- || align="center"|- || align="center"|- ||'''1)''' Monitor pavement temperature closely for drops toward 32º F and below, '''2)''' Treat slick patches if needed with pre-wetted solid salt at 100 lb/lane-mile or brine 44 gal/lane-mile; plow if needed
+
| rowspan="2"|'''Above 32º F,''' 32º F or below is imminent; ''ALSO'' '''15º to 32º F,''' remaining in range|| Dry||Apply brine or pre-wetted salt|| align="center"| 100|| align="center"| 44|| rowspan="2"|Plow as needed, reapply liquid or solid chemical when needed|| rowspan="2" align="center"|100|| rowspan="2" align="center"| 44 || rowspan="2" |'''1)''' Applications will need to be more frequent at lower temperatures and higher snowfall rates
 +
 
 +
'''2)''' It is not advisable to apply a straight brine at the indicated spread rate when the pavement temperature drops below 20ºF
 +
 
 +
'''3)''' Do not apply brine onto heavy snow accumulation or packed snow
 
|-
 
|-
| rowspan="2"|'''Above 32º F,''' 32º F or below is imminent; ''ALSO'' '''20 to 32º F,''' remaining in range|| Dry||Apply brine or pre-wetted salt|| align="center"| 100|| align="center"| 44|| rowspan="2"|Plow as needed, reapply brine or pre-wetted solid salt when needed|| rowspan="2" align="center"|100|| rowspan="2" align="center"| 200 || rowspan="2" align="center"|44|| rowspan="2" align="center"|88|| rowspan="2" |'''1)''' Applications will need to be more frequent at lower temperatures and higher snowfall rates , '''2)''' Do not apply brine onto heavy snow accumulation or packed snow, '''3)''' After heavy snow periods and during light snowfall, reduce salt rate to 100 lb./lane-mile or 44 gal./lane-mile brine; continue to plow and apply salt as needed
+
|Wet, slush, or light snow cover||Apply liquid or solid salt|| align="center"| 100|| align="center"| 44
 
|-
 
|-
|Wet, slush, or light snow cover||Apply brine or pre-wetted salt|| align="center"| 100|| align="center"| 44
+
|'''0º to 15º F,''' remaining in range|| Dry, wet, slush or light snow cover||Apply pre-wetted solid chemical|| align="center"| 200|| align="center"| -||Plow as needed, reapply pre-wetted solid chemical when needed|| align="center"|200|| align="center"| - || '''1)''' Abrasives may be added to the salt to enhance traction at colder temperatures
 +
 
 +
'''2)''' Liquid calcium chloride may be used for pre-wetting solid salt at colder temperatures
 
|-
 
|-
|'''10 to 32º F,''' remaining in range|| Dry, wet, slush or light snow cover||Apply pre-wetted salt|| align="center"| 200|| align="center"| -||Plow as needed, reapply pre-wetted solid salt when needed|| align="center"|200|| align="center"| 250 || align="center"| -|| align="center"| -|| '''1)''' Reduce salt rate to 200 lb./lane-mile after heavier snow periods and during light snowfall; continue to plow and apply salt as needed, '''2)''' Liquid calcium chloride may be used for pre-wetted salt at colder temperatures
+
|'''Below 0º F,''' steady or falling|| Dry or light snow cover||Plow as needed|| align="center"| -|| align="center"| -||Plow and apply salt/abrasive mix as needed|| align="center"|-|| align="center"| - || '''1)''' 1 If pavement becomes slick apply salt/abrasive mix to enhance traction.  Salt will have limited melting power in this temperature range.
 +
 
 +
'''2)''' Pre-wet salt/abrasive mix with liquid calcium chloride.
 
|-
 
|-
|'''Below 10º F,''' steady or falling|| Dry or light snow cover||Plow as needed|| align="center"| -|| align="center"| -||Plow and apply salt/abrasive mix as needed|| align="center"|-|| align="center"| - || align="center"| -|| align="center"| -|| As pavement becomes slick, apply salt/abrasive mix to enhance traction. Salt will have limited melting power at these temperatures.
+
| colspan="9"|'''''Notes:''  SALT APPLICATIONS.''' '''1)''' Time initial and subsequent chemical applications to prevent deteriorating conditions or development of packed and bonded snow. '''2)''' Apply salt ahead of traffic rush periods occurring during storm.
|-
+
 
| colspan="11"| '''Salt Applications.''' (1) Time initial and subsequent chemical applications to ''prevent'' deteriorating conditions or development of packed and bonded snow. (2) '''Anticipate increases in snowfall intensity.  Apply higher rate treatments prior to or at the beginning of heavier snowfall periods to prevent development of packed and bonded snow.''' (3) Apply salt ahead of traffic rush periods occurring during storm.
+
'''PLOWING.''' If needed, '''''plow before salt applications''''' so that excess snow, slush, or ice is removed and pavement is wet, slushy, or lightly snow covered when treated.
|-
 
| colspan="11"|'''Plowing.''' If needed, ''plow before salt applications'' so that excess snow, slush, or ice is removed and pavement is wet, slushy, or lightly snow covered when treated.
 
 
|}
 
|}
  
Line 343: Line 350:
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
|-
 
|-
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.3 Moderate or Heavy Snow Storm Weather Event.pdf|Printable pdf of "Moderate or Heavy Snow Storm Weather Event"]]
+
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.3 Type 3.doc|Printable file for "Type 3 Winter Event"]]
|}
 
  
 +
|}
  
 
+
====<center>Table 133.5.3.6.3 Type 3 Winter Event: 1 – 6 in. of snow/frozen precipitation in 24 hours OR a trace to 1/2 in. of ice</center>====
 
 
====<center>Table 133.5.3.6.3 Moderate or Heavy Snow Storm Weather Event</center>====
 
  
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+ ''First Priority Continuous Treatment Routes''
+
|+ ''Continuous Operations Routes''
! style="background:#ccffcc" rowspan="3"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="4"| Initial Operation!! style="background:#ccffcc" colspan="3"|Subsequent Operations!! style="background:#ccffcc" rowspan="3"| Comments
+
! style="background:#ccffcc" rowspan="4"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="4"| Initial Operation!! style="background:#ccffcc" colspan="5"|Subsequent Operations!! style="background:#ccffcc" rowspan="4" width=25%| Comments
 
|-
 
|-
! style="background:#ccffcc" rowspan="2"|Pavement surface at time of initial operation!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates
+
! style="background:#ccffcc" rowspan="3"|Pavement surface at time of initial operation!! style="background:#ccffcc" rowspan="3"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates!! style="background:#ccffcc" rowspan="3"|Maintenance action!! style="background:#ccffcc" colspan="4"|Salt spread rates
 
|-
 
|-
!style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mail)!! style="background:#ccffcc"|Brine (gal/lane-mile)!! style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mile)!!style="background:#ccffcc"|Brine (gal/lane-mile)
+
!style="background:#ccffcc" rowspan="2"|Pre-wetted solid salt (lb/lane-mile)!! style="background:#ccffcc" rowspan="2"|Brine (gal/lane-mile)!! style="background:#ccffcc" colspan="2"|Pre-wetted solid salt (lb/lane-mile)!! style="background:#ccffcc" colspan="2"|Brine (gal/lane-mile)
 
|-
 
|-
|'''Above 32º F,''' steady or rising|| Dry, wet, slush or light snow cover|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- ||'''1)''' Monitor pavement temperature closely for drops toward 32º F and below, '''2)''' Treat slick patches if needed with pre-wetted solid salt at 100 lb/lane-mile or with brine at 44 gal/lane-mile; plow if needed
+
! style="background:#ccffcc"|Light snow!! style="background:#ccffcc"|Heavier snow!! style="background:#ccffcc"|Light snow!! style="background:#ccffcc"|Heavier snow!!
 
|-
 
|-
| rowspan="2"|'''Above 32º F,''' 32º F or below is imminent;  ''ALSO'' '''30 to 32º F,''' remaining in range||Dry||Apply brine or pre-wetted solid salt|| align="center"|100|| align="center"|44|| rowspan="2"|Plow accumulation and reapply brine or solid salt as needed|| rowspan="2" align="center"|100|| rowspan="2" align="center"| 44||rowspan="2"|''' 1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 200 lb/lane-mile to accommodate longer operational cycles , '''2)''' Do not apply brine onto heavy snow accumulation or packed snow
+
|'''Above 32º F,''' steady or rising|| Dry, wet, slush or light snow cover|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- || align="center"|- || align="center"|- ||'''1)''' Monitor pavement temperature closely for drops toward 32º F and below.
 +
'''2)''' Treat slick patches if needed with pre-wetted salt at 100 lb/lane-mile or brine 44 gal/lane-mile; plow if needed.
 
|-
 
|-
|Wet, slush or light snow cover||Apply brine or pre-wetted solid salt|| align="center"|100|| align="center"|44
+
| rowspan="2"|'''Above 32º F,''' 32º F or below is imminent; ''ALSO'' '''20º to 32º F,''' remaining in range|| Dry||Apply brine or pre-wetted salt|| align="center"| 100|| align="center"| 44|| rowspan="2"|Plow as needed, reapply brine or pre-wetted solid salt when needed|| rowspan="2" align="center"|100|| rowspan="2" align="center"| 200 || rowspan="2" align="center"|44|| rowspan="2" align="center"|88|| rowspan="2" |'''1)''' Applications will need to be more frequent at lower temperatures and higher snowfall rates.
 +
'''2)''' Do not apply brine onto heavy snow accumulation or packed snow.
 +
'''3)''' After heavier snow periods and during light snowfall, reduce salt rate to 100 lb./lane-mile or 44 gal./lane-mile brine; continue to plow and apply salt as needed
 
|-
 
|-
| rowspan="2"|'''20 to 30º F,''' remaining in range||Dry||Apply brine or pre-wetted solid salt|| align="center"|150-200|| align="center"|65-87|| rowspan="2"|Plow accumulation and reapply brine or solid salt as needed|| rowspan="2" align="center"|200|| rowspan="2" align="center"| 87||rowspan="2"|''' 1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 400 lb/lane-mile to accommodate longer operational cycles , '''2)''' Do not apply brine onto heavy snow accumulation or packed snow
+
|Wet, slush, or light snow cover||Apply brine or pre-wetted salt|| align="center"| 100|| align="center"| 44
 
|-
 
|-
|Wet, slush or light snow cover||Apply brine or pre-wetted solid salt|| align="center"|150-200|| align="center"|65-87
+
|'''10º to 20º F,''' remaining in range|| Dry, wet, slush or light snow cover||Apply pre-wetted salt|| align="center"| 200|| align="center"| -||Plow as needed, reapply pre-wetted solid salt when needed|| align="center"|200|| align="center"| 250 || align="center"| -|| align="center"| -|| '''1)''' Reduce salt rate to 200 lb./lane-mile after heavier snow periods and during light snowfall; continue to plow and apply salt as needed.
 +
'''2)''' Liquid calcium chloride may be used for pre-wetted salt at colder temperatures
 
|-
 
|-
|'''10 to 20º F,''' remaining in range||Dry, wet, slush or light snow cover||Apply pre-wetted solid salt|| align="center"|200|| align="center"| - ||Plow accumulation and reapply brine or solid salt as needed|| align="center"|250|| align="center"| - || '''1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 500 lb/lane-mile to accommodate longer operational cycles , '''2)''' Liquid calcium chloride may be used for pre-wetting salt at colder temperatures
+
|'''Below 10º F,''' steady or falling|| Dry or light snow cover||Plow as needed|| align="center"| -|| align="center"| -||Plow and apply salt/abrasive mix as needed|| align="center"|-|| align="center"| - || align="center"| -|| align="center"| -|| As pavement becomes slick, apply salt/abrasive mix to enhance traction.  Salt will have limited melting power at these temperatures.
 
|-
 
|-
|'''Below 10º F,''' steady or falling||Dry or light snow cover||Plow as needed|| align="center"| - || align="center"| - ||Plow accumulation as needed|| align="center"| 250 || align="center"| - ||'''1)''' As pavement becomes slick, apply salt/abrasive mix to enhance traction. Salt will have limited melting power in this temperature range.
+
| colspan="11"| '''''Notes:'' SALT APPLICATIONS.''' '''1)''' Time initial and subsequent chemical applications to ''prevent'' deteriorating conditions or development of packed and bonded snow. '''2) Anticipate increases in snowfall intensity.  Apply higher rate treatments prior to or at the beginning of heavier snowfall periods to prevent development of packed and bonded snow.'''  '''3)''' Apply salt ahead of traffic rush periods occurring during storm.
|-
+
'''PLOWING.''' If needed, ''plow before salt applications'' so that excess snow, slush or ice is removed and pavement is wet, slushy or lightly snow-covered when treated.
| colspan="9"| '''Salt Applications.''' (1) Time initial and subsequent chemical applications to ''prevent'' deteriorating conditions or development of packed and bonded snow ''timing and frequency of applications will be determined primarily by plowing requirements.'' (2) Apply salt ahead of traffic rush periods occurring during storm.
 
|-
 
| colspan="9"|'''Plowing.''' ''Plow before chemical applications'' so that excess snow, slush, or ice is removed and pavement is wet, slushy, or lightly snow covered when treated.
 
 
|}
 
|}
  
Line 381: Line 387:
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
|-
 
|-
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.4 Frost or Black Ice Weather Event.pdf|Printable pdf of "Frost or Black Ice Weather Event"]]
+
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.4 Type 2.doc|Printable file for "Type 2 Winter Event"]]
 +
 
 
|}
 
|}
  
 
+
====<center>Table 133.5.3.6.4 Type 2 Winter Event: 6 – 12 in. of snow in 24 hours OR ½ to ¾ in. of ice</center>====
 
 
====<center>Table 133.5.3.6.4 Frost or Black Ice Weather Event</center>====
 
  
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+ ''First Priority Continuous Treatment Routes''
+
|+ ''Continuous Operations Routes''
! style="background:#ccffcc" rowspan="3"|Pavement Temperature Range and Trend!! style="background:#ccffcc" rowspan="3"| Traffic Condition!! style="background:#ccffcc" colspan="3"|Initial Operation!! style="background:#ccffcc" colspan="3"|Subsequent Operations!! style="background:#ccffcc" rowspan="3"| Comments
+
! style="background:#ccffcc" rowspan="3"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="4"| Initial Operation!! style="background:#ccffcc" colspan="3"|Subsequent Operations!! style="background:#ccffcc" rowspan="3" width=25%| Comments
 +
|-
 +
! style="background:#ccffcc" rowspan="2"|Pavement surface at time of initial operation!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates
 
|-
 
|-
! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates
+
!style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mail)!! style="background:#ccffcc"|Brine (gal/lane-mile)!! style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mile)!!style="background:#ccffcc"|Brine (gal/lane-mile)
 
 
 
|-
 
|-
!style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mail)!! style="background:#ccffcc"|Brine (gal/lane-mile)!! style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mile)!! style="background:#ccffcc"|Brine (gal/lane-mile)
+
|'''Above 32º F,''' steady or rising|| Dry, wet, slush or light snow cover|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- ||'''1)''' Monitor pavement temperature closely for drops toward 32º F and below.
 +
'''2)''' Treat slick patches if needed with pre-wetted solid salt at 100 lb/lane-mile or with brine at 44 gal/lane-mile; plow if needed.
 
|-
 
|-
|'''Above 32º F,''' steady or rising|| Any level|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- ||'''1)''' Monitor pavement temperature closely; begin treatment if it starts to fall to 32º F and below and is at or below dew point.
+
| rowspan="2"|'''Above 32º F,''' 32º F or below is imminent;  ''ALSO'' '''30º to 32º F,''' remaining in range||Dry||Apply brine or pre-wetted solid salt|| align="center"|100|| align="center"|44|| rowspan="2"|Plow accumulation and reapply brine or solid salt as needed|| rowspan="2" align="center"|100|| rowspan="2" align="center"| 44||rowspan="2"|''' 1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 200 lb/lane-mile to accommodate longer operational cycles.
 +
'''2)''' Do not apply brine onto heavy snow accumulation or packed snow.
 
|-
 
|-
| rowspan="2"|'''28 to 32º F,''' remaining in range or falling to 32º F or below ''and'' equal to or below dew point||Traffic rate less than 100 vehicles per hr||Apply brine or pre-wetted solid salt|| align="center"|25-65|| align="center"|11-28||Reapply pre-wetted solid salt as needed|| align="center"|25-65|| align="center"|-||rowspan="2" | '''1)''' Monitor pavement temperature closely; if pavement becomes wet or if thin ice forms, reapply salt at higher indicated rated, '''2)''' Do not apply brine on ice so thickly that the pavement cannot be seen
+
|Wet, slush or light snow cover||Apply brine or pre-wetted solid salt|| align="center"|100|| align="center"|44
 
|-
 
|-
| Traffic rate greater than 100 vehicles per hr||Apply brine or pre-wetted solid salt|| align="center"|25-65|| align="center"|11-28|| Reapply brine pre-wetted solid salt as needed|| align="center"|25-65|| align="center"|11- 28
+
| rowspan="2"|'''20º to 30º F,''' remaining in range||Dry||Apply brine or pre-wetted solid salt|| align="center"|150-200|| align="center"|65-87|| rowspan="2"|Plow accumulation and reapply brine or solid salt as needed|| rowspan="2" align="center"|200|| rowspan="2" align="center"| 87||rowspan="2"|''' 1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 400 lb/lane-mile to accommodate longer operational cycles.
 +
'''2)''' Do not apply brine onto heavy snow accumulation or packed snow.
 
|-
 
|-
|'''20 to 28º F,''' remaining in range ''and'' equal to or below dew point||Any level||Apply brine or pre-wetted solid salt|| align="center"|65-130|| align="center"|28-57|| Reapply brine pre-wetted solid salt as needed || align="center"|65 - 130|| align="center"| 28 - 57||''' 1)''' Monitor pavement temperature closely; if thin ice forms, reapply salt at higher indicated rated, '''2)''' Applications will need to be more frequent at higher levels of condensation; if traffic volumes are not enough to disperse condensation, it may be necessary to increase frequency, '''3)''' It is not advisable to apply a brine at the indicated spread rate when the pavement temperature drops below 20º F.
+
|Wet, slush or light snow cover||Apply brine or pre-wetted solid salt|| align="center"|150-200|| align="center"|65-87
 
|-
 
|-
|'''10 to 20º F,''' remaining in range ''and'' equal to or below dew point||Any level||Apply pre-wetted solid salt|| align="center"|130 - 200|| align="center"| - ||Reapply pre-wetted solid salt as needed|| align="center"|130 - 200|| align="center"| - ||'''1)''' Monitor pavement temperature closely; if thin ice forms, reapply salt at higher indicated rated, '''2)''' Applications will need to be more frequent at higher levels of condensation; if traffic volumes are not enough to disperse condensation, it may be necessary to increase frequency,
+
|'''10º to 20º F,''' remaining in range||Dry, wet, slush or light snow cover||Apply pre-wetted solid salt|| align="center"|200|| align="center"| - ||Plow accumulation and reapply brine or solid salt as needed|| align="center"|250|| align="center"| - || '''1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 500 lb/lane-mile to accommodate longer operational cycles.
 +
'''2)''' Liquid calcium chloride may be used for pre-wetting salt at colder temperatures.
 
|-
 
|-
|'''Below 10º F,''' steady or falling||Any level||Apply abrasives|| align="center"| - || align="center"| - ||Apply abrasives as needed|| align="center"| - || align="center"| - ||'''1)''' Monitor pavement closely, salt will have limited melting power in this temperature range, '''2)''' Liquid calcium chloride may be used for pre-wetting salt/abrasive mix at colder temperatures.
+
|'''Below 10º F,''' steady or falling||Dry or light snow cover||Plow as needed|| align="center"| - || align="center"| - ||Plow accumulation as needed|| align="center"| 250 || align="center"| - ||As pavement becomes slick, apply salt/abrasive mix to enhance traction. Salt will have limited melting power in this temperature range.
 
|-
 
|-
| colspan="9"| '''Timing.''' (1) Conduct initial operation in advance of freezing. Apply brine up to 3 hr in advance. Use longer advance times in this range to effect drying when traffic volume is low. Apply pre-wetted solid salt 1 to 2 hr in advance. (2) In the absence of precipitation, brine at 33 gal/lane-mile has been successful in preventing bridge deck icing when placed up to 4 days before freezing on higher volume roads and 7 days before on lower volume roads.
+
| colspan="9"| '''''Notes.'' SALT APPLICATIONS.''' '''1)''' Time initial and subsequent salt applications to ''prevent'' deteriorating conditions or development of packed and bonded snow – '''''timing and frequency of applications will be determined primarily by plowing requirements.''''' '''2)''' Apply salt ahead of traffic rush periods occurring during storm.
 +
'''PLOWING.''' ''Plow before chemical applications'' so that excess snow, slush or ice is removed and pavement is wet, slushy, or lightly snow-covered when treated.
 
|}
 
|}
  
Line 415: Line 426:
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
|-
 
|-
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.5 Freezing Rain Storm Weather Event.pdf|Printable pdf of "Freezing Rain Storm Weather Event"]]
+
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.5 Type 1.doc|Printable file for "Type 1 Winter Event"]]
 +
 
 
|}
 
|}
  
 
+
====<center>Table 133.5.3.6.5 Type 1 Winter Event: More than 12 inches of snow in 24 hours OR more than ¾ inch of ice</center>====
 
 
====<center>Table 133.5.3.6.5 Freezing Rain Storm Weather Event</center>====
 
  
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+ ''First Priority Continuous Treatment Routes''
+
|+ ''Continuous Operations Routes''
! style="background:#ccffcc" rowspan="2"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="2"|Initial Operation!! style="background:#ccffcc" colspan="2"|Subsequent Operations!! style="background:#ccffcc" rowspan="2"| Comments
+
! style="background:#ccffcc" rowspan="3"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="4"| Initial Operation!! style="background:#ccffcc" colspan="3"|Subsequent Operations!! style="background:#ccffcc" rowspan="3" width=25%| Comments
 
|-
 
|-
! style="background:#ccffcc" |Maintenance action!! style="background:#ccffcc" |Salt spread rate (lb/lane-mile)!! style="background:#ccffcc" |Maintenance action!! style="background:#ccffcc" |Salt spread rates (lb/lane-mile)
+
! style="background:#ccffcc" rowspan="2"|Pavement surface at time of initial operation!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates!! style="background:#ccffcc" rowspan="2"|Maintenance action!! style="background:#ccffcc" colspan="2"|Salt spread rates
 
|-
 
|-
|'''Above 32º F,''' steady or rising||None, see comments|| align="center"| - ||  None, see comments|| align="center"|- ||'''1)''' Monitor pavement temperature closely for drops toward 32º F and below, '''2)''' Treat icy patches if needed with pre-wetted solid chemical at 75 – 100 lb/lane-mile.
+
!style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mail)!! style="background:#ccffcc"|Brine (gal/lane-mile)!! style="background:#ccffcc"|Pre-wetted solid salt (lb/lane-mile)!!style="background:#ccffcc"|Brine (gal/lane-mile)
 
|-
 
|-
|'''Above 32º F,''' 32º F or below  is imminent||Apply pre-wetted solid chemical|| align="center"|75-100||Reapply pre-wetted solid chemical as needed|| align="center"|75-100|| Monitor pavement temperature and precipitation closely;  
+
|'''Above 32º F,''' steady or rising|| Dry, wet slush or light snow cover|| None, see comments|| align="center"| - || align="center"| - || None, see comments|| align="center"|- || align="center"|- ||'''1)''' Monitor pavement temperature closely for drops toward 32º F and below
 +
'''2)''' Treat slick patches if needed with pre-wetted salt at 100 lb/lane-mi or with brine at 44 gal/ln-mi; plow if needed.
 
|-
 
|-
| '''20 to 32º F,''' remaining in range ||Apply pre-wetted solid chemical|| align="center"|75-250|| Reapply pre-wetted solid chemcial as needed || align="center"|75 - 250||'''1)''' Monitor pavement temperature and precipitation closely, '''2)''' Increase spread rate toward ''higher indicated rate'' with decrease in pavement temperature or increase in intensity of freezing rainfall, '''3)''' Decrease spread rate toward ''lower indicated rate'' with increase in pavement temperature or decrease in intensity of freezing rainfall.
+
| rowspan="2"|'''Above 32º F,''' 32º F or below is imminent;  ''ALSO'' '''30º to 32º F,''' remaining in range||Dry||Apply brine or pre-wetted solid salt|| align="center"|100|| align="center"|44||rowspan="2"|Plow accumulation and reapply brine or solid salt as needed|| align="center" rowspan="2"|100|| align="center" rowspan="2"|44||rowspan="2" | '''1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 200 lb/lane-mi to accommodate longer operational cycles.
 +
'''2)''' Do not apply brine onto heavy snow accumulation or packed snow.
 
|-
 
|-
|'''10 to 20º F,''' remaining in range||Apply pre-wetted solid chemical|| align="center"|250 - 400||Reapply pre-wetted chemical as needed|| align="center"|250 - 400|| '''1)''' Monitor pavement temperature and precipitation closely, '''2)''' Increase spread rate toward ''higher indicated rate'' with increase in intensity of freezing rainfall, '''3)''' Decrease spread rate toward ''lower indicated rate'' with decrease in intensity of freezing rainfall.
+
| Wet, slush, or light snow cover||Apply brine or pre-wetted solid salt|| align="center"|100|| align="center"|44
 
|-
 
|-
|'''Below 10º F,''' steady or falling||Apply abrasives|| align="center"| - ||Apply abrasives as needed|| align="center"| - ||  It is not recommended that chemicals be applied in this temperature range
+
|rowspan="2"|'''20º to 30º F,''' remaining in range ||Dry||Apply brine or pre-wetted solid salt|| align="center"|150-200|| align="center"|65-87|| rowspan="2"|Plow accumulation and reapply brine or solid salt as needed|| align="center" rowspan="2"|200|| align="center" rowspan="2"| 87|| rowspan="2"|''' 1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 400 lb/lane-mi to accommodate longer operational cycles.
 +
'''2)''' Do not apply brine onto heavy snow accumulation or packed snow.
 
|-
 
|-
| colspan="6"| '''Salt Applications.''' (1) Time initial and subsequent chemical applications to prevent glaze ice conditions. (2) Apply chemical ahead of traffic rush periods occurring during storm.
+
| Wet, slush, or light snow cover||Apply brine or pre-wetted solid salt|| align="center"|150-200|| align="center"|65-87
|}
 
 
 
 
 
{|style="padding: 0.3em; margin-left:15px; border:3px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"  
 
 
|-
 
|-
|style="background:#FFFFCC"|[[media: Table 133.5.3.6.6 Sleet Storm Weather Event.pdf|Printable pdf of "Sleet Storm Weather Event"]]
+
|'''10º to 20º F,''' remaining in range ||Dry, wet, slush, or light snow cover||Apply pre-wetted solid salt|| align="center"|200|| align="center"| - ||Plow accumulation and reapply brine or solid salt as needed|| align="center"|250|| align="center"| - ||'''1)''' If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 500 lb/lane-mi to accommodate longer operational cycles.
|}
+
'''2)''' Liquid calcium chloride may be used for pre-wetting salt at colder temperatures
 
 
 
 
 
 
====<center>Table 133.5.3.6.6 Sleet Storm Weather Event</center>====
 
 
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
 
|+ ''First Priority Continuous Treatment Routes''
 
! style="background:#ccffcc" rowspan="2"|Pavement Temperature Range and Trend!! style="background:#ccffcc" colspan="2"|Initial Operation!! style="background:#ccffcc" colspan="2"|Subsequent Operations!! style="background:#ccffcc" rowspan="2"| Comments
 
|-
 
! style="background:#ccffcc" |Maintenance action!! style="background:#ccffcc" |Dry chemical spread rate (lb/lane-mile)!! style="background:#ccffcc" |Maintenance action!! style="background:#ccffcc" |Salt spread rate (lb/lane-mile)
 
|-
 
|'''Above 32º F,''' steady or rising||None, see comments|| align="center"| - ||  None, see comments|| align="center"|- || '''1)''' Monitor pavement temperature closely for drops toward 32º F and below, '''2)''' Treat icy patches if needed with pre-wetted solid chemical at 125 lb/lane-mile.
 
|-
 
|'''Above 32º F,''' 32º F or below  is imminent||Apply pre-wetted solid chemical|| align="center"|125||Reapply pre-wetted solid chemical as needed|| align="center"|125|| Monitor pavement temperature and precipitation closely;
 
|-
 
|'''28 to 32º F,''' remaining in range ||Apply pre-wetted solid chemical|| align="center"|125-325|| Reapply pre-wetted solid chemcial as needed || align="center"|125 - 325||'''1)''' Monitor pavement temperature and precipitation closely, '''2)''' Increase spread rate toward ''higher indicated rate'' with increase in sleet intensity, '''3)''' Decrease spread rate toward ''lower indicated rate'' with decrease in sleet intensity.
 
|-
 
|'''10 to 28º F,''' remaining in range||Apply pre-wetted solid chemical|| align="center"|250 - 400||Reapply pre-wetted chemical as needed|| align="center"|250 - 400|| '''1)''' Monitor pavement temperature and precipitation closely, '''2)''' Increase spread rate toward ''higher indicated rate'' with increase in sleet intensity, '''3)''' Decrease spread rate toward ''lower indicated rate'' with decrease in sleet intensity.
 
 
|-
 
|-
|'''Below 10º F,''' steady or falling||Plow as needed|| align="center"| - ||Apply abrasives as needed|| align="center"| - || '''1)''' It is not recommended that chemicals be applied in this temperature range, '''2)''' Abrasives can be applied to enhance traction.
+
|'''Below 10º F,''' steady or falling||Dry or light snow cover||Plow as needed|| align="center"| - || align="center"| - ||Plow accumulation as needed|| align="center"| 250 || align="center"| - ||As pavement becomes slick apply salt/abrasive mix to enhance traction.  Salt will have limited melting power in this temperature range.
 
|-
 
|-
| colspan="6"| '''Salt Applications.''' (1) Time initial and subsequent salt applications to ''prevent'' the sleet from bonding to the pavement. (2) Apply salt ahead of traffic rush periods occurring during storm.  
+
| colspan="9"| '''''Notes:''  SALT APPLICATIONS.''' '''1)''' Time initial and subsequent salt applications to prevent deteriorating conditions or development of packed and bonded snow--'''''timing and frequency of subsequent applications will be determined primarily by plowing requirements.'''''  '''2)''' Apply salt ahead of traffic rush periods occurring during storm
 +
'''PLOWING.'''  ''Plow before chemical applications'' so that excess snow, slush or ice is removed and pavement is wet, slushy or lightly snow covered when treated.  
 
|}
 
|}
 +
  
  
 
[[Category:133 Snow and Ice Control]]
 
[[Category:133 Snow and Ice Control]]

Latest revision as of 08:08, 3 June 2022

133.5.jpg
Tables Printable pdf files
How to Use Liquid Anti-Icers How to Use Liquid Anti-Icers
Equivalent Salt Spread Rates Equivalent Salt Spread Rates
Pure salt concentration and corresponding specific gravity (measured by a hydrometer) at 59º F Pure salt concentration and corresponding specific gravity (measured by a hydrometer) at 59º F
Gradation of salt specified by ASTM D 632 and MoDOT Gradation of salt specified by ASTM D 632 and MoDOT
Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities) Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities)
Type 5 Winter Event: Frost, Flurries, Freezing Fog, Blowing Snow and Refreeze Type 5 Winter Event
Type 4 Winter Event: Dusting to 1 in. of snow, sleet, or other frozen precipitation Type 4 Winter Event
Type 3 Winter Event: 1 – 6 in. of snow/frozen precipitation in 24 hours OR a trace to 1/2 in. of ice Type 3 Winter Event
Type 2 Winter Event: 6 – 12 in. of snow in 24 hours OR ½ to ¾ in. of ice Type 2 Winter Event
Type 1 Winter Event: More than 12 inches of snow in 24 hours OR more than ¾ inch of ice Type 1 Winter Event


Anti-icing is the snow and ice control practice of preventing the development of a bond between snow and/or ice and the pavement surface with the timely application of salt. Applying the right amount of salt at the right time will make snow removal operations more efficient and produce safer driving conditions during winter storms.

This article provides guidelines for the application of salt to the roadway for a variety of winter storm conditions. The timing and application rates were developed under the SHRP/FHWA Research Program, in which MoDOT participated. Many Maintenance personnel who have tested these procedures have found them to be valuable in their winter maintenance operations. The statewide implementation of this technology will help produce safer driving conditions on MoDOT’s continuous operations routes during winter months.

133.5.1 Operations Guide for Maintenance Field Personnel

This is a guide to highway anti-icing operations for Maintenance field personnel. Its purpose is to recommend maintenance actions for preventing the formation or development of packed and bonded snow or bonded ice on the continuous operations routes during a variety of winter weather events. It is intended to complement the decision-making and management practices of a systematic anti-icing program so that continuous operations routes can be efficiently maintained in the best possible condition.

These guidelines are based on the results of four years of anti-icing field testing conducted by 15 state DOTs, including MoDOT, and is supported by the Strategic Highway Research Program (SHRP) and the Federal Highway Administration (FHWA). Since then, it has been augmented with many additional years of anti-icing experience in different parts of our state.

Guidance for anti-icing operations during five winter weather events is available. The five events are:

  • Type 5 Winter Event: Frost, flurries, freezing fog, blowing snow & refreeze
  • Type 4 Winter Event: Dusting to 1 in. of snow, sleet or other frozen precipitation
  • Type 3 Winter Event: 1 – 6 in. of snow/frozen precipitation in 24 hours OR a trace to ½ in. of ice
  • Type 2 Winter Event: 6 – 12 in. of snow in 24 hours OR ½ to ¾ in. of ice
  • Type 1 Winter Event: More than 12 in. of snow in 24 hours OR more than ¾ in. of ice
Related Information
MoDOT Snow Academy Official Guide, Participant's Manual and Snow Academy Website

The tables suggest the appropriate maintenance action to take during initial and follow-up anti-icing operations for a given precipitation or icing event. Each action is defined for a range of pavement temperatures and an associated temperature trend. For some events the operation is dependent not only on the pavement temperature and trend, but also upon the pavement surface or the traffic condition at the time of the action. Many of the maintenance actions involve the application of salt in either a dry solid, pre-wetted or brine (liquid) form. Pre-wetted solid and brine are the two primary forms on which we need to concentrate. Application rates are given for each form where appropriate. These are suggested rates and should be adjusted, if necessary, to achieve the effectiveness for local conditions.

Comments and notes are given in each table where appropriate to further guide field maintenance personnel for their anti-icing operations.

133.5.2 Glossary

Preparing for winter weather in Butler County

Black ice. Popular term for a very thin coating of clear, bubble-free, homogenous ice which forms on a pavement with a temperature at or slightly above 32º F when the temperature of the air in contact with the ground is below the freezing-point of water and small slightly supercooled water droplets deposit on the surface and coalesce (flow together) before freezing.

Brine. Water saturated with common salt (NaCl), also liquid salt or liquid chemical.

Continuous Operations Routes. This system includes all major highways, minor highways with traffic volumes of 2,500 ADT or greater and other urban and community routes designated by the district in consultation with the Maintenance Division. This also includes all designated incident bypass routes.

These routes will receive plowing and application of snow and ice control treatments on an as needed basis, throughout the storm until all lanes are restored to a near normal condition.

Dew Point. The temperature that a vapor begins to condense.

Freezing rain. Super-cooled droplets of liquid precipitation falling on a surface whose temperature is below or slightly above freezing, resulting in a hard, slick, generally thick coating of ice commonly called glaze or clear ice. Non-super-cooled raindrops falling on a surface whose temperature is well below freezing will also result in glaze.

Frost. Also called hoarfrost. Ice crystals in the form of scales, needles, feathers or fans deposited on surfaces cooled by radiation or by other processes. The deposit may be composed of drops of dew frozen after deposition and of ice formed directly from water vapor at a temperature below 0º C (32º F) (sublimation).

Light Snow. Snow falling at the rate of less than 1/2 in. per hour; visibility is not affected adversely.

Moderate or heavy snow. Snow falling at a rate of 1/2 in. per hour or greater; visibility may be reduced.

Pre-treatment. This is the practice of applying salt brine at 44 gallons per lane mile to dry pavement prior to the winter event, or the application of pre-wetted salt to the surface prior to snow and ice bonding to the pavement.

Pre-wetting. Pre-wetting is the practice of applying salt brine to dry salt before it is placed on the pavement, and should be done at 10 to 15 gallons per ton. Liquid calcium chloride may be used for pre-wetting salt at temperatures below 15° F.

Sleet. A mixture of rain and of snow that has been partially melted by falling through an atmosphere with a temperature slightly above freezing.

Slush. Accumulation of snow that lies on an impervious base and is saturated with water in excess of its freely drained capacity. It will not support any weight when stepped or driven on but will "squish" until the base support is reached.

Spread Rate. The salt application rate in either the solid or liquid form. For solid applications it is simply the weight of the salt applied per lane mile. For liquid applications it is the volume (gallons) of brine applied per lane mile.

133.5.3 Tables

Table 133.5.3.1 How to Use Liquid Anti-Icers

Pounds of Ice Melted per Pound of Salt
Temperature, ° F One Pound of Salt (sodium chloride)
30 46.3 lbs. of ice
25 14.4 lbs. of ice
20 8.6 lbs. of ice
15 6.3 lbs. of ice
10 4.9 lbs. of ice
5 4.1 lbs. of ice
0 3.7 lbs. of ice
Printable pdf of "Equivalent Salt Spread Rates"


Table 133.5.3.2 Equivalent Salt Spread Rates

Solid or Pre-wetted Solid (lbs./lane-mile) Salt Brine, 23% Concentration NaCL (gallon/lane-mile)
25 11
50 22
75 33
100 44
125 55
150 65
200 87


Printable pdf of "Pure salt concentration and corresponding specific gravity (measured by a hydrometer) at 59º F"



Table 133.5.3.3 Pure salt concentration and corresponding specific gravity (measured by a hydrometer) at 59º F

Percent salt Specific gravity at 59º F Percent of saturation Weight 1 of salt, lb/gal
0 1.000 0 0
5 1.035 20 0.43
6 1.043 24 0.52
7 1.050 28 0.61
8 1.057 32 0.71
9 1.065 36 0.80
10 1.072 40 0.90
11 1.080 44 0.99
12 1.087 48 1.00
13 1.095 52 1.10
14 1.103 56 1.29
15 1.111 60 1.39
16 1.118 63 1.49
17 1.126 67 1.60
18 1.134 71 1.71
19 1.142 75 1.81
20 1.150 79 1.92
21 1.158 83 2.03
22 1.166 87 2.14
23 1.175 91 2.26
24 1.183 95 2.37
25 1.191 99 2.45
25.2 1.200 100
1Note: Weight of commercial salt required = (weight of pure NaCl from table) ÷ (purity in percent)


Printable pdf of "Gradation of salt specified by ASTM D 632 and MoDOT"



Table 133.5.3.4 Gradation of salt specified by ASTM D 632 & MoDOT

Sieve size Weight % passing
ASTM Gr. 1 ASTM Gr. 2 MoDOT
3/4 in. - 100 -
1/2 in. 100 - 100
3/8 in. 95-100 - 95-100
No. 4 20-90 29-100 15-95
No. 8 10-60 10-60 5-65
No. 30 0-15 0-15 0-15
Note: ASTM Gr. 1 is the most commonly used gradation in the U.S.


Printable pdf of "Proportions for preparing sodium chloride solution from commercial grade salt"



Table 133.5.3.5 Proportions for preparing sodium chloride solution from commercial grade salt (i.e., up to 5 percent impurities)

Actual %NaCl Weight NaCl Crystalization temperature, º F Weight per unit volume of solution, lb/gal
per volume solution, lb/gal per volume water, lb/gal
10 0.9 0.8 20 8.95
15 1.4 1.3 12 9.28
20 1.9 1.7 0 9.6
231 2.3 1.9 -6 9.76
25 2.5 2.1 -16 10.3
1 Note: This is the approximate eutectic composition, i.e., the composition that results in the lowest temperature at which a solution can exist while remaining completely liquid.

133.5.3.6 Tables for Continuous Operations Routes

Printable file for "Type 5 Winter Event"


Table 133.5.3.6.1 Type 5 Winter Event: Frost, Flurries, Freezing Fog, Blowing Snow and Refreeze

Continuous Operations Routes
Pavement Temperature Range and Trend Traffic Condition Initial Operation Subsequent Operations Comments
Maintenance Action Spread Rates Maintenance Action Spread Rates
Pre-wetted solid salt (lb/lane-mile) Brine (gal/lane-mile) Pre-wetted solid salt (lb/lane-mile) Brine (gal/lane-mile)
Above 32º F, steady or rising Any level None, see comments - - None, see comments - - 1) Monitor pavement temperature closely; begin treatment if starts to fall to 32ºF and below and is at or below dew point.
28º F to 32º F, remaining in range or falling to 32º F or below, and equal to or below dew point Traffic rate less than 100 vehicles per hr Apply brine or pre-wetted solid salt 25-65 11-28 Reapply pre-wetted solid salt as needed 25-65 - 1) Monitor pavement closely; if pavement becomes wet or if thin ice forms, reapply salt at higher indicated rate.

2) Do not apply brine on ice so thick that the pavement cannot be seen.

Traffic rate greater than 100 vehicles per hr Apply brine or pre-wetted solid salt 25-65 11-28 Reapply brine pre-wetted solid salt as needed 25-65 11-28
20º to 28º F, remaining in range and equal to or below dew point Any level Apply brine or pre-wetted solid salt 65-130 28-57 Reapply brine pre-wetted solid salt as needed 65-130 28-57 1) Monitor pavement closely; if thin ice forms, reapply salt at higher indicated rate.

2) Applications will need to be more frequent at higher levels of condensation; if traffic volumes are not enough to disperse condensation, it may be necessary to increase frequency.

3) It is not advisable to apply a brine at the indicated spread rate when the pavement temperature drops below 20ºF.

10º to 20º F, remaining in range and equal to or below dew point Any level Apply pre-wetted solid salt 130-200 - Reapply pre-wetted solid salt as needed 130-200 - 1) Monitor pavement closely; if thin ice forms, reapply salt at higher indicated rate.

2) Applications will need to be more frequent at higher levels of condensation; if traffic volumes are not enough to disperse condensation, it may be necessary to increase frequency.

Below 0º F, steady or falling Any level Apply abrasives - - Apply abrasives as needed - - 1) Monitor pavement closely, salt will have limited melting power in this temperature range.

2) Liquid calcium chloride may be used for pre-wetting salt/abrasive mix at colder temperatures.

Notes: TIMING. 1) Conduct initial operation in advance of freezing. Apply brine up to 3 hr in advance. Use longer advance times in this range to effect drying when traffic volume is low. Apply pre-wetted solid salt 1 to 2 hr in advance. 2) In the absence of precipitation, brine at 33 gal/lane-mi has been successful in preventing bridge deck icing when placed up to 4 days before freezing on higher volume roads and 7 days before on lower volume roads.


Printable file for "Type 4 Winter Event"

Table 133.5.3.6.2 Type 4 Winter Event: Dusting to 1 in. of snow, sleet, or other frozen precipitation

Continuous Operations Routes
Pavement Temperature Range and Trend Initial Operation Subsequent Operations Comments
Pavement surface at time of initial operation Maintenance action Salt spread rates Maintenance action Salt spread rates
Pre-wetted solid salt (lb/lane-mile) Brine (gal/lane-mile) Pre-wetted solid salt (lb/lane-mile) Brine (gal/lane-mile)
Above 32º F, steady or rising Dry, wet, slush or light snow cover None, see comments - - None, see comments - - 1) Monitor pavement temperature closely for drops toward 32º F and below.

2) Treat icy patches if needed with pre-wetted solid salt at 100 lb/lane-mile; plow if needed.

Above 32º F, 32º F or below is imminent; ALSO 15º to 32º F, remaining in range Dry Apply brine or pre-wetted salt 100 44 Plow as needed, reapply liquid or solid chemical when needed 100 44 1) Applications will need to be more frequent at lower temperatures and higher snowfall rates

2) It is not advisable to apply a straight brine at the indicated spread rate when the pavement temperature drops below 20ºF

3) Do not apply brine onto heavy snow accumulation or packed snow

Wet, slush, or light snow cover Apply liquid or solid salt 100 44
0º to 15º F, remaining in range Dry, wet, slush or light snow cover Apply pre-wetted solid chemical 200 - Plow as needed, reapply pre-wetted solid chemical when needed 200 - 1) Abrasives may be added to the salt to enhance traction at colder temperatures

2) Liquid calcium chloride may be used for pre-wetting solid salt at colder temperatures

Below 0º F, steady or falling Dry or light snow cover Plow as needed - - Plow and apply salt/abrasive mix as needed - - 1) 1 If pavement becomes slick apply salt/abrasive mix to enhance traction. Salt will have limited melting power in this temperature range.

2) Pre-wet salt/abrasive mix with liquid calcium chloride.

Notes: SALT APPLICATIONS. 1) Time initial and subsequent chemical applications to prevent deteriorating conditions or development of packed and bonded snow. 2) Apply salt ahead of traffic rush periods occurring during storm.

PLOWING. If needed, plow before salt applications so that excess snow, slush, or ice is removed and pavement is wet, slushy, or lightly snow covered when treated.


Printable file for "Type 3 Winter Event"

Table 133.5.3.6.3 Type 3 Winter Event: 1 – 6 in. of snow/frozen precipitation in 24 hours OR a trace to 1/2 in. of ice

Continuous Operations Routes
Pavement Temperature Range and Trend Initial Operation Subsequent Operations Comments
Pavement surface at time of initial operation Maintenance action Salt spread rates Maintenance action Salt spread rates
Pre-wetted solid salt (lb/lane-mile) Brine (gal/lane-mile) Pre-wetted solid salt (lb/lane-mile) Brine (gal/lane-mile)
Light snow Heavier snow Light snow Heavier snow
Above 32º F, steady or rising Dry, wet, slush or light snow cover None, see comments - - None, see comments - - - - 1) Monitor pavement temperature closely for drops toward 32º F and below.

2) Treat slick patches if needed with pre-wetted salt at 100 lb/lane-mile or brine 44 gal/lane-mile; plow if needed.

Above 32º F, 32º F or below is imminent; ALSO 20º to 32º F, remaining in range Dry Apply brine or pre-wetted salt 100 44 Plow as needed, reapply brine or pre-wetted solid salt when needed 100 200 44 88 1) Applications will need to be more frequent at lower temperatures and higher snowfall rates.

2) Do not apply brine onto heavy snow accumulation or packed snow. 3) After heavier snow periods and during light snowfall, reduce salt rate to 100 lb./lane-mile or 44 gal./lane-mile brine; continue to plow and apply salt as needed

Wet, slush, or light snow cover Apply brine or pre-wetted salt 100 44
10º to 20º F, remaining in range Dry, wet, slush or light snow cover Apply pre-wetted salt 200 - Plow as needed, reapply pre-wetted solid salt when needed 200 250 - - 1) Reduce salt rate to 200 lb./lane-mile after heavier snow periods and during light snowfall; continue to plow and apply salt as needed.

2) Liquid calcium chloride may be used for pre-wetted salt at colder temperatures

Below 10º F, steady or falling Dry or light snow cover Plow as needed - - Plow and apply salt/abrasive mix as needed - - - - As pavement becomes slick, apply salt/abrasive mix to enhance traction. Salt will have limited melting power at these temperatures.
Notes: SALT APPLICATIONS. 1) Time initial and subsequent chemical applications to prevent deteriorating conditions or development of packed and bonded snow. 2) Anticipate increases in snowfall intensity. Apply higher rate treatments prior to or at the beginning of heavier snowfall periods to prevent development of packed and bonded snow. 3) Apply salt ahead of traffic rush periods occurring during storm.

PLOWING. If needed, plow before salt applications so that excess snow, slush or ice is removed and pavement is wet, slushy or lightly snow-covered when treated.


Printable file for "Type 2 Winter Event"

Table 133.5.3.6.4 Type 2 Winter Event: 6 – 12 in. of snow in 24 hours OR ½ to ¾ in. of ice

Continuous Operations Routes
Pavement Temperature Range and Trend Initial Operation Subsequent Operations Comments
Pavement surface at time of initial operation Maintenance action Salt spread rates Maintenance action Salt spread rates
Pre-wetted solid salt (lb/lane-mail) Brine (gal/lane-mile) Pre-wetted solid salt (lb/lane-mile) Brine (gal/lane-mile)
Above 32º F, steady or rising Dry, wet, slush or light snow cover None, see comments - - None, see comments - - 1) Monitor pavement temperature closely for drops toward 32º F and below.

2) Treat slick patches if needed with pre-wetted solid salt at 100 lb/lane-mile or with brine at 44 gal/lane-mile; plow if needed.

Above 32º F, 32º F or below is imminent; ALSO 30º to 32º F, remaining in range Dry Apply brine or pre-wetted solid salt 100 44 Plow accumulation and reapply brine or solid salt as needed 100 44 1) If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 200 lb/lane-mile to accommodate longer operational cycles.

2) Do not apply brine onto heavy snow accumulation or packed snow.

Wet, slush or light snow cover Apply brine or pre-wetted solid salt 100 44
20º to 30º F, remaining in range Dry Apply brine or pre-wetted solid salt 150-200 65-87 Plow accumulation and reapply brine or solid salt as needed 200 87 1) If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 400 lb/lane-mile to accommodate longer operational cycles.

2) Do not apply brine onto heavy snow accumulation or packed snow.

Wet, slush or light snow cover Apply brine or pre-wetted solid salt 150-200 65-87
10º to 20º F, remaining in range Dry, wet, slush or light snow cover Apply pre-wetted solid salt 200 - Plow accumulation and reapply brine or solid salt as needed 250 - 1) If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 500 lb/lane-mile to accommodate longer operational cycles.

2) Liquid calcium chloride may be used for pre-wetting salt at colder temperatures.

Below 10º F, steady or falling Dry or light snow cover Plow as needed - - Plow accumulation as needed 250 - As pavement becomes slick, apply salt/abrasive mix to enhance traction. Salt will have limited melting power in this temperature range.
Notes. SALT APPLICATIONS. 1) Time initial and subsequent salt applications to prevent deteriorating conditions or development of packed and bonded snow – timing and frequency of applications will be determined primarily by plowing requirements. 2) Apply salt ahead of traffic rush periods occurring during storm.

PLOWING. Plow before chemical applications so that excess snow, slush or ice is removed and pavement is wet, slushy, or lightly snow-covered when treated.


Printable file for "Type 1 Winter Event"

Table 133.5.3.6.5 Type 1 Winter Event: More than 12 inches of snow in 24 hours OR more than ¾ inch of ice

Continuous Operations Routes
Pavement Temperature Range and Trend Initial Operation Subsequent Operations Comments
Pavement surface at time of initial operation Maintenance action Salt spread rates Maintenance action Salt spread rates
Pre-wetted solid salt (lb/lane-mail) Brine (gal/lane-mile) Pre-wetted solid salt (lb/lane-mile) Brine (gal/lane-mile)
Above 32º F, steady or rising Dry, wet slush or light snow cover None, see comments - - None, see comments - - 1) Monitor pavement temperature closely for drops toward 32º F and below

2) Treat slick patches if needed with pre-wetted salt at 100 lb/lane-mi or with brine at 44 gal/ln-mi; plow if needed.

Above 32º F, 32º F or below is imminent; ALSO 30º to 32º F, remaining in range Dry Apply brine or pre-wetted solid salt 100 44 Plow accumulation and reapply brine or solid salt as needed 100 44 1) If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 200 lb/lane-mi to accommodate longer operational cycles.

2) Do not apply brine onto heavy snow accumulation or packed snow.

Wet, slush, or light snow cover Apply brine or pre-wetted solid salt 100 44
20º to 30º F, remaining in range Dry Apply brine or pre-wetted solid salt 150-200 65-87 Plow accumulation and reapply brine or solid salt as needed 200 87 1) If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 400 lb/lane-mi to accommodate longer operational cycles.

2) Do not apply brine onto heavy snow accumulation or packed snow.

Wet, slush, or light snow cover Apply brine or pre-wetted solid salt 150-200 65-87
10º to 20º F, remaining in range Dry, wet, slush, or light snow cover Apply pre-wetted solid salt 200 - Plow accumulation and reapply brine or solid salt as needed 250 - 1) If the desired plowing/treatment frequency cannot be maintained, the spread rate can be increased to 500 lb/lane-mi to accommodate longer operational cycles.

2) Liquid calcium chloride may be used for pre-wetting salt at colder temperatures

Below 10º F, steady or falling Dry or light snow cover Plow as needed - - Plow accumulation as needed 250 - As pavement becomes slick apply salt/abrasive mix to enhance traction. Salt will have limited melting power in this temperature range.
Notes: SALT APPLICATIONS. 1) Time initial and subsequent salt applications to prevent deteriorating conditions or development of packed and bonded snow--timing and frequency of subsequent applications will be determined primarily by plowing requirements. 2) Apply salt ahead of traffic rush periods occurring during storm.

PLOWING. Plow before chemical applications so that excess snow, slush or ice is removed and pavement is wet, slushy or lightly snow covered when treated.