Difference between revisions of "233.3 Roundabouts"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m
m
Line 9: Line 9:
 
|align="center" colspan="2"|'''[http://sharepoint/systemdelivery/TR/mo/arterialmgmt/Roundabouts/SitePages/Home.aspx?&&View={8332C048-CC3B-4ACA-8881-4B53BFEC730C} Additional Resources]'''
 
|align="center" colspan="2"|'''[http://sharepoint/systemdelivery/TR/mo/arterialmgmt/Roundabouts/SitePages/Home.aspx?&&View={8332C048-CC3B-4ACA-8881-4B53BFEC730C} Additional Resources]'''
 
|}
 
|}
In order to ensure Missouri’s roundabouts are designed according to the current practice and provide for a functional and operational analysis, all preliminary roundabout layouts shall be submitted to both Traffic Division and Design Division for review prior to detailed design.  
+
In order to ensure Missouri’s roundabouts are designed according to the current practice and provide for a functional and operational analysis, all preliminary roundabout layouts shall be submitted to both the Highway Safety and Traffic Division and the Design Division for review prior to detailed design.  
  
 
[[Image:233.3 Route 13.jpg|1075px|center]]
 
[[Image:233.3 Route 13.jpg|1075px|center]]

Revision as of 13:44, 29 June 2017

233.3 Photo1 Roundabout.jpg


A roundabout is a circular traffic intersection featuring yield control on all entering roadway legs, one-way continuous flow within the circulatory roadway, channelization of the approaching roadways, and appropriate geometric curvature to keep circulating speeds low. Roundabouts may contain as few as three legs; however, roundabouts with more than four legs are not uncommon. Typical roundabout terminology with key geometric elements is available.

This article is currently under comprehensive revision to more accurately reflect the contents of TRB’s NCHRP Report 672, Roundabouts: An Informational Guide, Second Edition. In the interim, that guide is considered the location selection, design and layout guidance for MoDOT roundabouts.

Additional Resources

In order to ensure Missouri’s roundabouts are designed according to the current practice and provide for a functional and operational analysis, all preliminary roundabout layouts shall be submitted to both the Highway Safety and Traffic Division and the Design Division for review prior to detailed design.

233.3 Route 13.jpg