609.6 Maintenance Planning Guidelines for Repairing Curbs

From Engineering_Policy_Guide
Revision as of 13:18, 3 January 2008 by Smithk (talk | contribs) (info from Maintenance)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

609.6.1 Maintenance Planning Guidelines for Repairing Concrete Curbs

These Maintenance planning guidelines apply to major roads.

Code: R316

Purpose To restore drainage by repairing concrete curbs, curb and gutters, and curbed medians.

Scheduling As needed when the air and ground temperatures are above 45 º F.

Recommended Equipment

  • Trucks
  • Concrete mixer or concrete mobile
  • Concrete curb machine
  • Concrete saw
  • Compressor/breaker
  • Water tank
  • Traffic control equipment, as needed

Recommended Material

  • Concrete
  • Reinforcing steel
  • Form material
  • Expansion felts
  • Grates
  • Water

Recommended Procedure

1. Place traffic control devices as needed.

2. Saw exterior limits of damaged section.

3. Remove damaged concrete, form, install steel and place expansion felt at each transverse joint.

4. Pour concrete, finish and apply curing compound.

5. Clean work area.

6. Remove traffic control devices.

Safety Be careful when working near traffic. Wear all appropriate Personal Protection Equip (PPE). Refer to Safety Policies, Rules & Regulations-Employee Handbook .

Other Considerations None.

Reference Sec 609

609.6.2 Maintenance Planning Guidelines for Repairing Asphalt Curbs

These Maintenance planning guidelines apply to major roads.

Code: R316

Purpose To restore drainage by repairing asphalt curbs, islands medians.

Scheduling As needed when the air and ground temperatures are above 60 º F.

Recommended Equipment

  • Trucks
  • Air compressor/asphalt bit
  • Asphalt curb machine
  • Distributor
  • Traffic control equipment, as needed

Recommended Material

  • Hot mix
  • Liquid asphalt (tacking grade)

Recommended Procedure

1. Place traffic control devices as needed.

2. Remove damaged material, tack, repair and compact area.

3. Remove traffic control devices.

Safety Keep an eye out for traffic. Wear all appropriate Personal Protection Equip (PPE). Refer to Safety Policies, Rules & Regulations-Employee Handbook .

Other Considerations None.

Reference Sec 609