Difference between revisions of "616.8 Typical Applications (MUTCD 6H)"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (Per TR, minor revisions to several TAs)
m (corrected the location of the legend)
Line 2: Line 2:
  
 
===<center>Listing of Typical Applications for Maintenance</center>===
 
===<center>Listing of Typical Applications for Maintenance</center>===
 
<center>[[media:616.8 legend.pdf|Legend for the Maintenance TAs]]</center>
 
  
 
<center>([[#Listing of Typical Applications for Design and Construction and Materials|TAs for Design and Construction and Materials]] are also available)
 
<center>([[#Listing of Typical Applications for Design and Construction and Materials|TAs for Design and Construction and Materials]] are also available)
Line 153: Line 151:
 
 
 
</center>
 
</center>
 +
  
 
===<center>Listing of Typical Applications for Design and Construction and Materials</center>===
 
===<center>Listing of Typical Applications for Design and Construction and Materials</center>===
 +
 +
<center>[[media:616.8 legend.pdf|Legend for the Design and Construction and Materials TAs]]</center>
 
<center>([[#Listing of Typical Applications for Maintenance|TAs for Maintenance]] are also available)
 
<center>([[#Listing of Typical Applications for Maintenance|TAs for Maintenance]] are also available)
  

Revision as of 14:42, 5 May 2016

616.8.1 Listing of Typical Applications

Listing of Typical Applications for Maintenance

(TAs for Design and Construction and Materials are also available)
Typical Application Description TA No. Maintenance Figure Number
Work Outside of the Shoulder (see EPG 616.7.6)
Work Beyond the Shoulder on Divided and Undivided Highways TA-1 616.8.1 - MT
Blasting Zone - Contact district personnel*
Work on the Shoulder (see EPG 616.7.7 and EPG 616.7.8)
Shoulder Work on Two-Lane Highways with Edgelines TA-3 616.8.3 - MT
Shoulder Work on Two-Lane Highways without Edgelines TA-3a 616.8.3a - MT
Shoulder Work on Divided Highways TA-5 616.8.5 - MT
Work Within the Traveled Way of a Two-Lane Highway (see EPG 616.7.10)
Highway Closure TA-8 616.8.8 - MT
Road Closed Beyond Junction Detour TA-9 616.8.9 - MT, DECM
Lane Closure on Two-Lane Highways With Edgelines Using Flaggers TA-10 616.8.10 - MT
Lane Closure on Two-Lane Highways Without Edgelines Using Flaggers TA-10a 616.8.10a - MT
Lane Closure on Two-Lane Highways with Edgelines Using AFAD Red Amber Signal System TA-10b 616.8.10b - MT
Lane Closure on Two-Lane Highways without Edgelines Using AFAD Red Amber Signal System TA-10c 616.8.10c - MT
Lane Closure on Two-Lane Highways with Edgelines Using Portable Signal Flagging Device TA-10d 616.8.10d - MT
Lane Closure on Two-Lane Highways without Edgelines Using Portable Signal Flagging Device TA-10e 616.8.10e - MT
Side Roads Entering Work Zones TA-10g 616.8.10g - MT
Lane Closure on Two-Lane Highways Without Edgelines TA-11 616.8.11 - MT
Lane Closure on Two-Lane Highways With Edgelines TA-12 616.8.12 - MT
Lane Closure on Two-Lane Highways Without Edgelines Using Traffic Control Signals TA-12a 616.8.12a - MT
Work in the Center of a Road with Low Traffic Volumes - N/A in MoDOT
Surveying Along Centerline of Two-Way Highways without Edgelines TA-16 616.8.16 - MT
Mobile Operation on Two-Lane Highways with Edgelines TA-17 616.8.17 - MT
Mobile Operation on Two-Lane Highways without Edgelines TA-17a 616.8.17a - MT
Centerline-Edgeline Striping on Two-Lane Highways TA-17b 616.8.17b - MT
Work Within the Traveled Way of an Urban Street (see EPG 616.7.11)
Lane Closure on a Minor Street - N/A in MoDOT
Highway Closure TA-8 616.8.8 - MT
Work Within the Traveled Way at an Intersection and on Sidewalks (see EPG 616.7.13)
Lane Closure on Near Side of Intersection TA-21 616.8.21 - MT
Lane Closure of Right Lane on Far Side of Intersection TA-22 616.8.22 - MT
Lane Closure of Left Lane on Far Side of Intersection TA-23 616.8.23- MT
Sidewalk Detour or Diversion TA-28 616.8.28 - MT
Crosswalk Closures and Pedestrian Detours TA-29 616.8.29 - MT
Half Road Closure on the Far Side of an Intersection - Contact district personnel*
Multiple Lane Closures at an Intersection - Contact district personnel*
Closure in the Center of an Intersection - Contact district personnel*
Closure at the Side of an Intersection - Contact district personnel*
Work Within the Traveled Way of a Multi-Lane, Non-Access Controlled Highway (see EPG 616.7.12)
Lane Closure on Multi-Lane Undivided Highways TA-30 616.8.30 - MT
Operations in Two-Way Left Turn Lane on Multi-Lane TA-30a 616.8.30a - MT
Lane Closure Using Two-Way Left Turn Lane on Undivided Highways TA-31 616.8.31 - MT
Lane Closure on Alternate Passing Lanes TA-31a 616.8.31a - MT
Lane Closure on Left or Right Lane on Divided Highway TA-33 616.8.33 - MT
Mobile Operation on a Divided or Multi-Lane Highways TA-35 616.8.35 - MT
Centerline and/or Lane Line Striping on Multi-Lane, Undivided Highways TA-35a 616.8.35a - MT
Edgeline Striping on Multi-Lane, Undivided Highways TA-35b 616.8.35b - MT
Lane Line and or Left Edgeline Striping on Divided Highways TA-35c 616.8.35c - MT
Right Edgeline Striping on Divided Highways TA-35d 616.8.35d - MT
Work Within the Traveled Way of a Freeway or Expressway (see EPG 616.7.14)
Lane Closure of Interior Lane on Multi-Lane Highways TA-37 616.8.37 - MT
Lane Closure of Interior Lane on Multi-Lane Highways for Capacity TA-38 616.8.38 - MT
Lane Closure of Interior Lane on Multi-Lane Divided Highways TA-38a 616.8.38a - MT
Lane Closure of Interior Lane on Multi-Lane Divided Highways TA-38b 616.8.38b - MT
Lane Closure of Interior Lane on Multi-Lane Divided Highways TA-38c 616.8.38c - MT
Median Crossover for an Entrance Ramp - Contact district personnel*
Median Crossover for an Exit Ramp - Contact district personnel*
Work in the Vicinity of an Exit Ramp TA-42 616.8.42 - MT
Work on Ramps TA-43 616.8.43 - MT
Work in the Vicinity of an Entrance Ramp TA-44 616.8.44 - MT
Lane Closure at Interchange TA-44a 616.8.44a - MT
Work in the Vicinity of a Grade Crossing TA-46 616.8.46 - MT
Excavations with Steel Plate or Back Fill - Undivided Highways TA-47a 616.8.47a - MT, DECM
Excavations with Steel Plate or Back Fill - Divided Highways TA-47b 616.8.47b - MT, DECM
Intermediate Lane Closure TA-48 616.8.48 - MT, DECM
Signs in Narrow Medians TA-49 616.8.49 - MT, DECM
Temporary Reversible Lane Using Movable Barriers - Contact district personnel*
Sequential Flashing Warning Light (see EPG 616.6.83)
Sequential Flashing Warning Light - 616.6.83
* These typical applications may require additional guidance with the district and referencing to the MUTCD.


Listing of Typical Applications for Design and Construction and Materials

Legend for the Design and Construction and Materials TAs
(TAs for Maintenance are also available)
Typical Application Description TA No. Design/Construction and Materials
Figure Number
Spacing and Taper Lengths for Work Zone Signs, Channelizers and Concrete Barrier TA-51 616.8.51 - DECM
Work Outside of the Shoulder (see EPG 616.7.6)
Work Beyond the Shoulder on Divided and Undivided Highways TA-1 616.8.1 - DECM
Blasting Zone - Contact district personnel*
Work on the Shoulder (see EPG 616.7.7 and EPG 616.7.8)
Work on the Shoulder on Divided and Undivided Highways TA-3 616.8.3 - DECM
Shoulder Work on Divided and Undivided Highways Reduced Lane Widths TA-5 616.8.5 - DECM
Shoulder Work with Minor Encroachment on Divided and Undivided Highways TA-6 616.8.6 - DECM
Work Within the Traveled Way of a Two-Lane Highway (see EPG 616.7.10)
Road Closure with a Diversion TA-7 616.8.7 - DECM
Lane Shift on Two-Lane Roadway TA-7a 616.8.7a - DECM
Temporary Connection at Terminus of Divided Lane Facilities TA-7b 616.8.7b - DECM
Highway Closure TA-8 616.8.8 - DECM
Road Closed Beyond Junction Detour TA-9 616.8.9 - DECM, MT
Lane Closure on Two-Lane Road Using Flaggers TA-10 616.8.10 - DECM
Lane Closure on Two-Lane Road Using Automated Flagger Assistance Devices (AFAD)-Red and Amber Signal System TA-10a 616.8.10a - DECM
Lane Closure on Two-Lane Road Using Portable Signal Flagging Devices (PSFD) TA-10c 616.8.10c - DECM
Flagger Control for Resurfacing or Moving Operation One-Lane Two-Way Operation TA-10d 616.8.10d - DECM
Lane Restriction on Two-Lane Roadway - Vertical Clearance at Bridge TA-10e 616.8.10e - DECM
Public Road Crossing Another Road Under Construction TA-10f 616.8.10f - DECM
Side Roads Entering Work Zones TA-10g 616.8.10g - DECM
Lane Closure on a Two-Lane Road Using Traffic Control Signals TA-12 616.8.12 - DECM
Portable Traffic Signal, Temporary Traffic Signal and Concrete Barrier Details TA-12a 616.8.12a - DECM
Estimated Average Peak Hour Signal Delay for Signal Control - One-lane Two-way Operation TA-12b 616.8.12b - DECM
Work in the Center of a Road with Low Traffic Volumes - N/A in MoDOT
Temporary Road Closure TA-13 616.8.13 - DECM
Truck and Equipment Crossing or Entrance TA-14 616.8.14 - DECM
Equipment Crossing or Entrance on Divided Highway Truck and Equipment Crossing or Entrance TA-14a 616.8.14a - DECM
Temporary Median Opening - Truck and Equipment Crossing or Entrance TA-14b 616.8.14b - DECM
Mobile Operation on Two-Lane Highways TA-17 616.8.17 - DECM
Centerline-Edgeline Striping on Two-Lane Highways TA-17a 616.8.17a - DECM
Work Within the Traveled Way of an Urban Street (see EPG 616.7.11)
Lane Closure on a Minor Street - N/A in MoDOT
Highway Closure TA-8 616.8.8 - DECM
Work Within the Traveled Way at an Intersection and on Sidewalks (see EPG 616.7.13)
Right Lane Closure at Intersection - Work on Near or Far Side TA-22 616.8.22 - DECM
Right Lane Closure at Intersection - Work on Far Side Only TA-22a 616.8.22a - DECM
Right Lane Closure at Intersection - Through Lane at Intersection TA-22b 616.8.22b - DECM
Left Lane Closure at Intersection - Work on Near or Far Side TA-23 616.8.23 - DECM
Left Lane Closure at Intersection - Work on Far Side Only TA-23a 616.8.23a - DECM
Half Road Closure on the Far Side of an Intersection - Contact district personnel*
Multiple Lane Closures at an Intersection - Contact district personnel*
Closure in the Center of an Intersection - Contact district personnel*
Closure at the Side of an Intersection - Contact district personnel*
Work Within the Traveled Way of a Multi-Lane, Non-Access Controlled Highway (see EPG 616.7.12)
Operations in Two-Way Left Turn Lane on Multi-Lane Undivided Highways TA-30a 616.8.30a - DECM
Lane Closure Using Center Turn Lane - Lane Shift TA-31 616.8.31 - DECM
Lane Closure on Alternate Passing Lanes TA-31a 616.8.31a - DECM
Two-Lane Closure on a 5-Lane Undivided Highway TA-32 616.8.32 - DECM
Stationary Lane Closure on a Divided Highway TA-33 616.8.33 - DECM
Lane Closure with a Temporary Traffic Barrier TA-34 616.8.34 - DECM
Lane Closure with Width and Lane Restrictions TA-34a 616.8.34a - DECM
Mobile Operation on a Divided or Multi-Lane Highways TA-35 616.8.35 - DECM
Centerline and/or Lane Line Striping on Multi-Lane, Undivided Highways TA-35a 616.8.35a - DECM
Work Within the Traveled Way of a Freeway or Expressway (see EPG 616.7.14)
Double Lane Closure on a Freeway TA-37 616.8.37 - DECM
Interior Lane Closure on a Freeway TA-38 616.8.38 - DECM
Median Crossover on a Divided Highway, Sheet 1 of 2 TA-39 616.8.39, Sheet 1 of 2 - DECM
Median Crossover on a Divided Highway, Sheet 2 of 2 TA-39 616.8.39, Sheet 2 of 2- DECM
Median Crossover for an Entrance Ramp - Contact district personnel*
Median Crossover for an Exit Ramp - Contact district personnel*
Work in the Vicinity of an Exit Ramp TA-42 616.8.42 - DECM
Partial Exit Ramp Closure TA-43 616.8.43 - DECM
Work in the Vicinity of an Entrance Ramp TA-44 616.8.44 - DECM
Excavations with Steel Plate or Back Fill - Undivided Highways TA-47a 616.8.47a - DECM, MT
Excavations with Steel Plate or Back Fill - Divided Highways TA-47b 616.8.47b - DECM, MT
Intermediate Lane Closure TA-48 616.8.48 - DECM, MT
Signs in Narrow Medians TA-49 616.8.49 - DECM, MT
Begin-End of Project Signing TA-50 616.8.50 - DECM
Temporary Reversible Lane Using Movable Barriers - Contact district personnel*
Work in the Vicinity of a Grade Crossing (see EPG 616.7.18)
Work in the Vicinity of a Grade Crossing - Contact district personnel*
Sequential Flashing Warning Light (see EPG 616.6.83)
Sequential Flashing Warning Light - 616.6.83
* These typical applications may require additional guidance with the district and referencing to the MUTCD.



Support. EPG 616.7 contains discussions of typical TTC activities. EPG 616.8 presents typical applications for a variety of situations commonly encountered. The typical applications provided in Chapter 6H of the MUTCD, the state of the practice, along with engineering judgment, was used as the basis of the development of the typical application for the temporary traffic control on the state highway system. For construction projects, EPG 616 presents typical applications for work zones. EPG 616.23 presents typical applications for work performed by MoDOT maintenance personnel.

While not every situation is addressed, the information illustrated can generally be adapted to a broad range of conditions. In many instances, an appropriate TTC plan is achieved by combining features from various typical applications. For example, work at an intersection might present a near-side work zone for one street and a far-side work zone for the other street. These treatments are found in two different typical applications, while a third typical application shows how to handle pedestrian crosswalk closures. For convenience in using the typical application diagrams, Tables 616.3.4 and 616.3.5 are reproduced in this article.

Procedures for establishing TTC zones vary with such conditions as road configuration, location of the work, work activity, duration of work, road user volumes, road vehicle mix (buses, trucks, cars, motorcycles and bicycles), and road user speeds.

In general, the procedures illustrated represent minimum solutions for the situations depicted. Except for the notes (which are clearly classified using headings as being Standard, Guidance, Option, or Support), the information presented in the typical applications can generally be regarded as Guidance.

Option. Other devices may be added to supplement the devices and device spacing may be adjusted to provide additional reaction time or delineation. Fewer devices may be used based on field conditions.

Support. Figures and tables found throughout EPG 616 provide information for the development of TTC plans. Also, Table 616.3.4 is used for the determination of sign spacing and other dimensions for various area and roadway types.

Fig. 616.8 is the legend for the temporary traffic control typical applications. In many of the typical applications, sign spacings and other dimensions are indicated by letters using the criteria provided in Table 616.3.4. The taper lengths are provided in Table 616.3.5.

Most of the typical applications show TTC devices for only one direction.

616.8.2 Legend for Typical Applications

Fig. 616.8.2 Meaning of Symbols on Typical Application Diagrams


616.8.3 Examples of Highways

Divided Highway: Highway with physical separation of traffic in the opposite direction.
Median Separation
Median Separation with Guard Cable
Barrier Wall Separation
Undivided Highway: Highway with no physical separation of traffic in the opposite direction.
Undivided Highway
Multi-lane Undivided Highway
Multi-lane with Turning Lane
Multi-lane with Raised Median
Multi-lane with Paved Narrow Median

616.8.4 Recommended Advance Warning Sign Minimum Spacing

Table 616.3.4
Speed Limit1, mph Sign Spacing2, ft.
Undivided Highway Divided Highway
up to 35 2003 2003
40 to 45 350 500
50 to 55 500 1000
60 to 70 1000 SA-1000
SB-1500
SC-2640
1 Speed limit is based on posted speed limit.
2 Sign spacing may be adjusted, normally by increasing it, to accommodate field conditions and visibility.
3 For urban low speed, minimum recommended spacing in MUTCD is 100 ft.

616.8.5 Recommended Taper Length and Spacing

Table 616.3.5
Speed Limit1, mph Taper Length2, ft. Channelizing Spacing 3, ft.
Shoulder4 (T1) Lane5 (T2) Tapers Buffer/Work Areas
up to 35 70 245 356 406
40 to 45 150 540 406 806
50 to 55 185 660 507 807
60 to 70 235 840 607 1207
1 Speed limit is based on posted speed limit.
2 Taper lengths may be adjusted to accommodate crossroads, curves, intersections, ramps or other geometric features.
3 Channelizer spacing may be reduced to discourage traffic encroachment.
4 Based on 10 ft. shoulder width.
5 Based on 12 ft. lane width.

6 Spacing reduced to 1/2 at intersections.
7 Spacing may be reduced to 1/2 at intersections.