Difference between revisions of "617.4 Laboratory Testing Guidelines for Sec 617"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (→‎617.4.2 Sample Record: Per CM, updated link to AS 3510)
m (updated link)
(One intermediate revision by the same user not shown)
Line 1: Line 1:
This article establishes procedures for Laboratory testing and reporting of concrete cylinders which represent material used in concrete median barriers. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec0617.pdf Sec 617] for MoDOT’s specifications.
+
This article establishes procedures for Laboratory testing and reporting of concrete cylinders which represent material used in concrete median barriers. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=9 Sec 617] for MoDOT’s specifications.
  
 
==617.4.1 Procedure==
 
==617.4.1 Procedure==
Line 6: Line 6:
  
 
==617.4.2 Sample Record==
 
==617.4.2 Sample Record==
The sample record shall be completed in SiteManager as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance or rejection. The notation "Specimens submitted for compressive strength at the age indicated" should be included in the sample record remarks. Test results shall be reported on the appropriate templates under the Tests tab.
+
The sample record shall be completed in SiteManager as described in [[:Category:101 Standard Forms#Sample Record General Information| Sample Record General Information]] [[image:bulldozer.jpg|20px]], and shall indicate acceptance, qualified acceptance or rejection. The notation "Specimens submitted for compressive strength at the age indicated" should be included in the sample record remarks. Test results shall be reported on the appropriate templates under the Tests tab.
  
 
[[Category:617 Traffic Barrier]]
 
[[Category:617 Traffic Barrier]]

Revision as of 10:20, 9 June 2016

This article establishes procedures for Laboratory testing and reporting of concrete cylinders which represent material used in concrete median barriers. Refer to Sec 617 for MoDOT’s specifications.

617.4.1 Procedure

Concrete cylinders shall be tested for compressive strength according to AASHTO T22. Test results and calculations shall be recorded through SiteManager.

617.4.2 Sample Record

The sample record shall be completed in SiteManager as described in Sample Record General Information Bulldozer.jpg, and shall indicate acceptance, qualified acceptance or rejection. The notation "Specimens submitted for compressive strength at the age indicated" should be included in the sample record remarks. Test results shall be reported on the appropriate templates under the Tests tab.