Difference between revisions of "903.13 State and Federal Recreation and Historic Site Signing"
m (updated link)
m (Smithk moved page 903.13 Recreational and Cultural Interest Area Signs to 903.13 State and Federal Recreation and Historic Site Signing: re-titled by TS)
Revision as of 14:10, 23 October 2020
- 1 903.13.1 Scope (MUTCD Section 2M.01)
- 2 903.13.2 Application (MUTCD Section 2M.02)
- 3 903.13.3 Regulatory and Warning Signs (MUTCD Section 2M.03)
- 4 903.13.4 General Design Requirements for Symbol Guide Signs (MUTCD Section 2M.04)
- 5 903.13.5 Symbol Sign Sizes (MUTCD Section 2M.05)
- 6 903.13.6 Use of Educational Plaques (MUTCD Section 2M.06)
- 7 903.13.7 Use of Prohibitive Circle and Diagonal Slash for Non-Road Application (MUTCD Section 2M.07)
- 8 903.13.8 Placement of Recreational and Cultural Interest Symbol Signs (MUTCD Section 2M.08)
- 9 903.13.9 Destination Guide Signs (MUTCD Section 2M.09)
- 10 903.13.10 National Park Signs
903.13.1 Scope (MUTCD Section 2M.01)
Support. Recreational or cultural interest areas are attractions or traffic generators that are open to the general public for the purpose of play, amusement or relaxation.
For the purpose of this chapter, recreational or cultural interest areas are sites that are owned and operated by state and federal agencies. For privately owned recreational and cultural interest signs see EPG 903.8.37 Traffic Generator Signing, EPG 903.11 Specific Service Signs - Logos and EPG 903.12 Tourist-Oriented Directional Signs.
Option. Recreational and cultural interest area guide signs directing road users to significant traffic generators may be used on freeways and expressways where there is direct access to these areas as provided in EPG 903.13.9. Recreational and cultural interest area signs may be used off the road network, as appropriate.
Rustic Signs may be used by state and federal agencies at approved locations, see Fig. 903.13.1. If these signs do not meet Federal breakaway standards, these sign shall be placed at or beyond MoDOT’s right of way.
903.13.2 Application (MUTCD Section 2M.02)
Support. Provisions for signing recreational or cultural interest areas are subdivided into two different types of signs: (1) symbol signs and (2) destination guide signs.
Guidance. These signs are not to be used where they might be confused with other traffic control signs.
Option. Recreational and cultural interest area guide signs may be used on any road to direct persons to facilities, structures, and places and to identify various services available to the general public. These guide signs may also be used in recreational or cultural interest areas for signing non-vehicular events and amenities such as trails, structures and facilities.
903.13.3 Regulatory and Warning Signs (MUTCD Section 2M.03)
Standard. All regulatory and warning signs installed on public roads and streets within recreational and cultural interest areas shall comply with the requirements of EPG 903.1 through EPG 903.5 and EPG 903.10 through EPG 903.21.
903.13.4 General Design Requirements for Symbol Guide Signs (MUTCD Section 2M.04)
Standard. Recreational and cultural interest area symbol guide signs shall be square or rectangular in shape and shall have a white symbol or message and white border on a brown background. The symbols shall be grouped into the following usage and series categories:
A. General Applications
D. Land Recreation
E. Water Recreation, and
F. Winter Recreation
Support. Table 903.13.4 contains a listing of the symbols within each series category.
Option. Mirror images of symbols may be used where the reverse image will better convey the message.
Table 903.13.4 Guide Sign Sizes
|Bear Viewing Area||RS-012||Drinking Water||RS-013||Beach||RS-145|
|Bus Stop||RS-031||Electrical Hook-Up||RS-150||Boat Motor||RS-147|
|Campfires1||RS-042||Firewood Cutting1||RS-112||Boat Ramp||RS-054|
|Cans or Bottles1||RS-101||First Aid||RS-024||Canoeing||RS-079|
|Cultural Interest Area||RS-142||Grocery Store||RS-020||Diving||RS-062|
|Deer Viewing Area||RS-011||Laundromat||RS-085||Fish Hatchery||RS-010|
|Falling Rocks1||RS-008||Litter Receptacle||RS-086||Fish Ladder1||RS-089|
|Fire Extinguisher1||RS-090||Lockers/Storage1||RS-030||Fishing Area||RS-063|
|Lookout Tower||RS-006||Picnic Shelter||RS-039||Hand Launch/Small Boat Launch||RS-117|
|Nature Study Area||RS-141||Picnic Site||RS-044||Jet Ski/Personal Watercraft||RS-121|
|Pets on Leash1||RS-017||Post Office||RS-026||Kayaking||RS-118|
|Pick-Up Trucks||RS-140||Ranger Station||RS-015||Lifejackets1||RS-094|
|Point of Interest||RS-080||Sanitary Station||RS-041||Marina||RS-053|
|Sea Plane||RS-115||Trail Shelter1||RS-043||Sailing||RS-056|
|Snack Bar1||RS-102||Trash Dumpster||RS-091||Seal Viewing||RS-106|
|Stay on Trail1||RS-123||Surfing||RS-059|
|Tunnel||RS-005||All-Terrain Trail||RS-095||Tour Boat||RS-087|
|Walk on Boardwalk1||RS-122||Archery||RS-116||Waterskiing||RS-058|
|Wood Gathering1||RS-120||Baseball1||RS-096||Whale Viewing||RS-107|
|Baby Changing Station (Men's Room)||RS-137||Driving Tour||RS-113||Winter Recreation|
|Baby Changing Station (Women's Room)||RS-138||Exercise/Fitness||RS-097||Chair Lift/Ski Lift||RS-105|
|Men's Restroom||RS-021||Golfing1||RS-128||Cross Country Skiing||RS-046|
|Parking||RS-034||Hang Gliding||RS-126||Dog Sledding||RS-143|
|Recreational Vehicle Site||RS-104||Hiking Trail||RS-068||Downhill Skiing||RS-047|
|Restrooms||RS-022||Horse Trail||RS-064||Ice Fishing||RS-092|
|Sleeping Shelter1||RS-037||In-Line Skating||RS-125||Ice Skating||RS-050|
|Trailer Site||RS-040||Interpretive Trail||RS-114||Ski Jumping||RS-048|
|Walk-In Camp||RS-148||Off-Road Vehicle Trail||RS-067||Sledding||RS-049|
|Women's Restroom||RS-023||Rock Collecting1||RS-083||Snow Tubing||RS-144|
|Technical Rock Climbing||RS-081||Snowshoeing||RS-078|
|Tennis||RS-129||Winter Recreational Area||RS-077|
|1 For non-road use only|
903.13.5 Symbol Sign Sizes (MUTCD Section 2M.05)
Guidance. Recreational and cultural interest area symbol signs should be 24 in. x 24 inches. Where greater visibility or emphasis is needed, larger sizes should be used. Symbol sign enlargements should be in 6-in. increments.
Recreational and cultural interest area symbol signs should be 30 in. x 30 in. when used on guide signs on freeways or expressways.
Option. A smaller size of 18 in. x 18 in. may be used on low-speed, low-volume roadways and on non-road applications.
903.13.6 Use of Educational Plaques (MUTCD Section 2M.06)
Guidance. Educational plaques should accompany all initial installations of recreational and cultural interest area symbol signs. The educational plaque should remain in place for at least 3 years after the initial installation. If used, the educational plaque should be the same width as the symbol sign.
Option. Symbol signs that are readily recognizable by the public may be installed without educational plaques.
Support. Fig. 903.13.6 illustrates some examples of the use of educational plaques.
903.13.7 Use of Prohibitive Circle and Diagonal Slash for Non-Road Application (MUTCD Section 2M.07)
Standard. Where it is necessary to indicate a prohibition of an activity or an item within a recreational or cultural interest area for non-road use and a standard regulatory sign for such a prohibition is not provided in EPG 903.5, the appropriate recreational and cultural interest area symbol shall be used in combination with a red prohibitive circle and red diagonal slash. The recreational and cultural interest area symbol and the sign border shall be black and the sign background shall be white. The symbol shall be scaled proportionally to fit completely within the circle and the diagonal slash shall be oriented from the upper left to the lower right portions of the circle as shown in Fig. 903.13.7. Requirements for retroreflection of the red circle and diagonal slash shall be the same as those requirements for backgrounds, legends, symbols, arrows, and borders.
903.13.8 Placement of Recreational and Cultural Interest Symbol Signs (MUTCD Section 2M.08)
Standard. If used, recreational and cultural interest area symbol signs shall be placed in accordance with the general requirements contained in EPG 903.2. The symbol(s) shall be placed as sign panels in the uppermost part of the sign and the directional information shall be placed below the symbol(s).
Except as provided below, if the name of the recreational or cultural interest area facility or activity is displayed on a destination guide sign and a symbol is used, the symbol shall be placed below the name.
Option. When the legend of Wildlife Viewing Area is displayed with the RS-076 symbol on a destination guide sign, the symbol may be placed to the left or right of the legend and the arrow may be placed below the symbol.
The symbols displayed with the facility or activity name may be placed below the destination guide sign instead of as sign panels placed with the destination guide sign.
Secondary symbols of a smaller size (18 in. x 18 in.) may be placed beneath the primary symbols, where needed.
Standard. Recreational and cultural interest area symbols installed for non-road use shall be placed in accordance with the general sign position requirements of the authority having jurisdiction.
Support. Fig. 903.13.8.1 illustrates typical height and lateral mounting positions. Fig. 903.13.8.2 illustrates some examples of the placement of symbol signs within a recreational or cultural interest area.
Guidance. Signing for specific facilities, such as picnic areas, boat ramps, fishing access, etc., within state or federal major traffic generators will be the responsibility of the respective agency and will be allowed at the point of first order signing. The number of symbols used in a single sign assembly is not to exceed four.
Option. The Advance Turn (M5 series) or Directional Arrow (M6 series) auxiliary signs with white arrows on brown backgrounds may be used with Recreational and Cultural Area Interest symbol guide signs to create a Recreational and Cultural Interest Area Directional Assembly. The symbols may be used singularly, or in groups of two, three or four on a single sign assembly.
903.13.9 Destination Guide Signs (MUTCD Section 2M.09)
Guidance. When recreational or cultural interest area destinations are displayed on supplemental guide signs, the sign should be rectangular with a white legend and border on a brown background.
These signs should be erected in the vicinity of state conservation areas, state parks, state historic sites, U.S. Corps of Engineers areas and U.S. forestry service areas. This sign will show the name of the area, type of area, directional arrow and the distance in miles to the area. For distances less than 10 miles, mileage will be indicated quarter mile increments. For distances 10 miles or greater, whole mile increments will be used. A logo of the owning agency may be included on the sign.
Standard. The requesting agency will be responsible for the cost of the participation fee for the recreation or cultural interest area signing program; Traffic will determine the cost. These signs shall be on a separate requisition grouped by agency if necessary. This is done to allow the agencies to approve the replacement of the signs prior to manufacturing. The Controller’s Office will bill the agency for the cost of the participation fee. A TR-15 contract will be executed. See EPG 903.16 Signing Agreements.
First, second and third order signing can be provided for public non-profit agencies where space allows. First, second and third order signing will be provided as shown in Fig. 903.13.9. Only numbered routes will be considered for second and third order signing.
Option. Destination guide signs with a white legend and border on a brown background may be posted at the first point where an access or crossroad intersects a highway where recreational or cultural interest areas are a significant destination along conventional roads, expressways or freeways. Supplemental guide signs with a white legend and border on brown background may be used along conventional roads, expressways or freeways to direct road users to recreational or cultural interest areas. Where access or crossroads lead exclusively to the recreational or cultural interest area, the advance guide sign and the exit direction sign may have a white legend and border on a brown background.
Standard. All Exit Gore signs shall have a white legend and border on a green background. The background color of the interchange exit number plaque shall match the background color of the guide sign. Design characteristics of conventional road, expressway or freeway guide signs shall comply with to EPG 903.7 or EPG 903.8 except as provided in this article for color combination.
The advance guide sign and the Exit Direction sign shall retain the white-on- green color combination where the crossroad leads to a destination other than a recreational or cultural interest area.
Support. Fig. 903.13.8.2 illustrates destination guide signs commonly used for identifying recreational or cultural interest areas or facilities.
Table 903.13.9 Recreational Sign and Plaque Sizes
|Sign or Plaque||Sign Designation||EPG Article||Conventional Road (in. x in.)||Freeway/Expressway (in. x in.)|
|Single Lane||Multi-Lane||Oversized||Mainline & Ramps|
|Public Area Directional||D7-10||903.13.9||72 X 24||72 X 24||-||72 X 24|
|Public Area Plaque||D7-10P||903.13.9||72 X 12||72 X 12||-||72 X 12|
|Public Area Directional (Narrow)||D7-10a||903.13.9||36 X 48||36 X 48||-||36 X 48|
903.13.10 National Park Signs
Standard. All national parks in Missouri shall be included in the recreational area signing program.
Signing for parks that are classified major area generator shall be located where the principal access highways intersect the National Highway System.
Support. Presently, there are two parks that would be provided signing under the major area generator classification: Jefferson National Expansion Memorial and Ozark National Scenic River Ways.