905.1 Traffic Data Collection

From Engineering_Policy_Guide
Revision as of 07:47, 27 October 2021 by Smithk (talk | contribs) (Updated website links for increased security)
Jump to navigation Jump to search
905.3.jpg


To perform a traffic study, certain data should be collected. A good source of data can be obtained from MoDOT’s Transportation Management System (TMS). TMS has inventories for roadway information as well as crash information. For some traffic studies, data from TMS may be enough. For other studies, field data will be required. The Traffic Data Collection article will show data available from TMS and data required from the field.



905.1.1 Transportation Management System (TMS)

905.1.1.1 Crash Summary

The Crash Summary TMS application ties roadway data to crash data. In TMS, select the menu options Applications + Safety Management System + Crash Summary, An example of the Crash Summary application may look like the following:


905.1.1.1.jpg

From the application, the following information can be found:

  • Crashes by severity
  • AADT
  • Crash rate (intersection or range)
  • State Crash Rate (by route designation & by roadway type)
  • Crashes by types.

The Crash Summary application provides a quick review of crash severity, comparative crash rates, and crashes by classification.

For range studies, crash rates calculated by TMS are frequency based, determined by the total number of crashes per 100 million vehicle miles traveled. Below is the equation used to calculate range crash rates:

Range lengths of more than one mile should be used in the calculation, if practical. As seen in the rate calculation, an crash rate for a route less than one mile long will result in an artificially high crash rate.

For intersection studies, crash rates calculated by TMS are also frequency-based but are determined by the total number of crashes by 1 million entering vehicles. Below is the equation used to calculate intersection crash rates:

Crash rates are a good indication of the level of operation for an intersection. It is not easy to determine if an individual crash rate is good or bad by itself. For this reason, there is a State Rate available for comparison. For range studies, the Crash Summary application compares the selected route to statewide routes of similar route designations (IS, US, MO, RT, etc.) and route type (freeway, expressway, two-lane, etc.). For intersection studies, a similar concept is in place to compare intersection with similar geometric design and entering volumes. Due to roadway data constraints at this time, not all intersections are comparable to statewide rates.

Additional information available through Crash Summary is the Crash Types, Statewide Average Crash Rates, and ARAN video. The Crash Type field provides a general description of the crash; i.e. rear-end, head-on, left turn, etc. The Statewide Average Crash Rate application can be launched to see more in-depth review of available crash rates. The ARAN video is available for most routes that allow the user to view the road as driven by the ARAN van.

905.1.1.2 Crash Browser

The Crash Browser application can be launched from the Crash Summary application or from the TMS menu Applications + Safety Management System + Crash Browser. An example of the Crash Browser application may look like the following:

905.1.1.2.jpg

From the application, the following information can be found:

  • Crash location
  • Crash classification
  • Crash date
  • Crash severity
  • Crash image number
  • Crash relation to roadway (range/intersection/interchange)
  • Light condition
  • Road surface condition
  • Weather condition

This information can be used to determine when crashes are occurring and the best times to go to the field to collect data and observe traffic conditions. Additionally, the collision diagram software and ARAN video can be launched from the Crash Browser application.

905.1.1.3 Statewide Average Crash Rates

The Statewide Average Crash Rates application can be launched from the TMS Menu or Crash Summary application. The application allows the user to view crash rates by state, district or county for many combinations of crash severity and roadway information. The Statewide Average Crash Rates are used to determine if the studied range is above or below the statewide average.

905.1.1.4 Intersection Expected Values

The Intersection Expected Crash Rates application can be launched from the TMS Menu. The application allows the user to compare the intersection being studied with other intersections in the state with similar roadway and traffic characteristics.

905.1.1.5 Queries & Reports

Queries & Reports are located under the TMS menu . Within the Queries & Reports menu are applications that will provide pavement reports, safety reports, state of the system (SOS) reports and traffic reports. The safety reports include the Crash Statistics Manual, High Severity Lists and various other crash reports by severity. The SOS reports provide roadway inventory information. The traffic reports provide AADT information for all state routes.

905.1.1.6 ArcMAP Queries

ArcMAP allows the user to map roadway and traffic data. Queries are available within the ArcMAP tool to map basic information. The software allows users to perform database queries from other query applications and import the data into ArcMAP for viewing. This mapping tool is useful for displaying data for public meetings.

905.1.1.7 Direct access to TMS Databases

Authorized TMS users have direct access to the TMS databases. Linking databases by using software such as Microsoft Access, allows TMS users to query data in a specialized manner. While the applications in TMS allow for most combinations of data, the applications cannot account for every scenario. When such a scenario occurs, specialized queries must be prepared by those with expertise in query languages and the details of the TMS Database.

905.1.2 Non-TMS Field Data

Installing a permanent traffic counter

While some field data may be available in TMS, it is often useful to obtain current data from the field. The TMS applications are data intensive. Very few state routes’ data are updated every year. Traffic patterns can change quickly with new developments. For these reasons, it is encouraged to obtain field data for traffic studies.

905.1.2.1 Traffic Counts

As mentioned, traffic patterns can change quickly. There are several ways to review traffic data that may be important to a study. For intersections, it is common to perform a 12-hour turning movement count. When counting an intersection for 12 hours, track the turning movements by 15-minute intervals. By tracking vehicle actions using 15-minute intervals, the intersection can be reviewed for peak hour(s) movements and assist in signal timing plans.

When the traffic study involves a range location, count devices can be placed to gather AADT and sometimes speed. Due to new developments and the TMS count cycle, it may be a couple years before a road is counted. It is also good to confirm the information in TMS. While in the field gathering traffic counts, it is a good idea to perform a spot speed study as well.

905.1.2.2 Speed Study

A speed study is performed to determine the prevailing speed at a location. The prevailing speed is used to determine if the speed limit is set appropriately and to check for proper sight distances along the roadway.

905.1.2.3 Traffic Flow

While performing a traffic study for either an intersection or range, take notes about the traffic flow. Look for erratic and illegal maneuvers or other operational problems, as these may indicate signing/striping needs or other operational deficiencies.

905.1.2.4 Condition Diagram

As mentioned in the S-HAL, the Condition Diagram is a drawing (to scale, if practical), of the existing roadway, control device locations and major features in the nearby environment.

905.1.2.5 Sight Distance Measurements

Sight Distances should be measured for at-grade intersections and ranges. There are four basic sight distance measurements that will be obtained:

Sight distances will be measured for

If sight distance is being reviewed due to an entrance permit, refer to EPG 941.7 Sight Distance for Entrances.

905.1.2.6 Measuring Degree of Curvature

Sometimes horizontal degrees of curvature are used to make engineering decisions. An example is the article on chevron placement. By using equations involving the curve’s radius, LC (length of chord), degree of curve, and middle ordinate, a relationship can be calculated. The relationship assumes a chord length of 62 ft. By using a chord length of 62 ft., the middle ordinate (measured in inches) equals the degree of curvature, thus a simple field check using a 62 ft. length of rope can be used to measure the degree of curvature.


Components of a simple circular curve

Where,

PI = points of intersection of back tangent and forward tangent
PC = point of curvature, the point of change from back tangent to circular curve
PT = point of tangency, the point of change from circular curve to forward tangent
LC = Total chord length, or long chord, from PC to PT in ft. for the circular curve
D = Degree of curvature, the central angle that subtends a 100 ft. arc. The degree of curvature is determined by the appropriate design speed (anticipated posted speed).
= Total intersection (or delta) angle between back and forward tangents
T = Tangent distance in ft. The distance between the PC and PI or the PI and PT.
L = Total length in ft. of the circular curve from PC to PT measured along its arc.
E = External distance (radial distance) in ft. from PI to the midpoint of the circular curve.


Table 905.1.2.6

Assume “LC” Degree of Curve (D) Convert Degrees to Radians Calculate “R”, sin(1/2D)=50/R Calculate , LC = 2R sin (/2) Calculate “MO” in ft., MO = R(1 – cos (/2)) ”MO”, in inches
62 1 0.017453293 5729.650674 0.010820957 0.08 1.01
62 2 0.034906585 2864.934425 0.021641406 0.17 2.01
62 3 0.052359878 1910.077501 0.032460841 0.25 3.02
62 4 0.06981317 1432.685417 0.043278753 0.34 4.03
62 5 0.087266463 1146.279281 0.054094636 0.42 5.03
62 6 0.104719755 955.3661305 0.064907979 0.50 6.04
62 7 0.122173048 819.020412 0.075718276 0.59 7.04
62 8 0.13962634 716.7793513 0.086525016 0.67 8.05
62 9 0.157079633 637.2747422 0.097327689 0.75 9.05