Category:1020 Corrugated Metallic-Coated Steel Culvert Pipe, Pipe-Arches and End Sections
Jump to navigation
Jump to search
- Qualified Brands and Manufacturers of Galvanized (Zinc-Coated) Steel Sheet
- Qualified Brands and Manufacturers of Aluminum Coated Steel Sheet
- Qualified Fabricators of Corrugated Metallic-Coated Steel Culvert Pipe, Pipe-Arches and End Sections
This article establishes procedures for inspecting, accepting and reporting of corrugated metallic-coated steel culvert pipe, pipe-arches, couplings and flared end sections. Refer to Sec 1020 for MoDOT’s specifications.
The EPG 1020.5 Corrugated Metal Pipe (CMP) Inspection Guide, a table for Sampling Corrugated Metallic-Coated Steel Sheets and Sampling Base Metal Sheets or Coils are available. For Laboratory testing and sample reporting procedures, refer to 1020.8 Laboratory Testing Guidelines for Sec 1020.
Articles in "1020 Corrugated Metallic-Coated Steel Culvert Pipe, Pipe-Arches and End Sections"
The following 8 pages are in this category, out of 8 total.