Category:233 At - Grade Intersections

From Engineering_Policy_Guide
Revision as of 11:18, 7 September 2021 by Smithk (talk | contribs) (updated broken links)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
233 Photo 1.jpg

An at-grade intersection is an area where two or more roadways join or cross. It also includes the roadside facilities for traffic movement within the area. Each intersection involves through or cross-traffic movements on one or more roadways and may involve turning movements between these roadways. The main objective of the intersection is to facilitate the convenience, ease, and comfort of people traversing the intersection while enhancing the safe and efficient movement of motor vehicles, bicycles and pedestrians. To accomplish this task, the intersection must have the capacity to handle all the volume of traffic flowing through it.

CAP-X Worksheet
The Capacity Analysis for Planning of Junctions is a tool that districts can use to consider alternative at-grade intersection types based upon peak flow volumes.

There are five basic elements to be considered in the design and operation of an intersection:

Intersections having three or four legs are the most common and efficient in their operation. Intersections with more than five legs are to be avoided. Basic traffic management at an intersection can be placed in one of the following categories:

233 Photo 2.jpg

It is important to provide adequate sight distance clear of obstructions within the functional area of the intersection to ensure a driver’s view of other vehicles is not blocked.

While most individuals understand intersections occur at roadway crossings, there are other types of intersections:

233 Photo 3.jpg

Other factors can also affect the efficient operation of an intersection. These are:

Rural Expressway, Median Crossovers
Report 2001
Report 2004
Summary 2004
See also: Research Publications
Additional Information
FHWA's Alternative Intersections/Interchanges Report

Signalized intersections can be considered for expressways that pass through communities. In a rural area, a designer is not to consider including a signalized intersection for a new expressway, although one may be installed at an existing expressway intersection with the recommendation of the Highway Safety and Traffic Division. The distance between intersections along MoDOT roadways is dependent on whether the road is major or minor, rural or urban. The Access Management Guidelines is to be used to determine desirable spacing of at-grade intersections. The NCHRP 500 series is a good source of information when considering improvements at an at-grade intersection.