Difference between revisions of "Category:309 Laboratory Testing Guidelines for Portland Cement Concrete Base"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (article construction)
m (updated link)
 
(One intermediate revision by the same user not shown)
Line 4: Line 4:
 
AASHTO T22. Test results and calculations shall be recorded through SiteManager.
 
AASHTO T22. Test results and calculations shall be recorded through SiteManager.
  
'''Sample Record.''' The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], with a notation in the remarks, "Specimens submitted for compressive strength at the age indicated and the test results are for informational purposes only." Test results shall be reported on the appropriate templates under the Tests tab.
+
'''Sample Record.''' The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information| Sample Record General Information]] [[image:bulldozer.jpg|20px]], with a notation in the remarks, "Specimens submitted for compressive strength at the age indicated and the test results are for informational purposes only." Test results shall be reported on the appropriate templates under the Tests tab.

Latest revision as of 11:28, 22 August 2013

This article establishes procedures for Laboratory testing of concrete cylinders for portland cement concrete base.

Procedure. Concrete cylinders shall be tested for compressive strength according to AASHTO T22. Test results and calculations shall be recorded through SiteManager.

Sample Record. The sample record shall be completed in SiteManager, as described in Sample Record General Information Bulldozer.jpg, with a notation in the remarks, "Specimens submitted for compressive strength at the age indicated and the test results are for informational purposes only." Test results shall be reported on the appropriate templates under the Tests tab.