Category:321 Geotechnical Engineering

From Engineering_Policy_Guide
Revision as of 09:08, 22 October 2008 by Tschid (talk | contribs) (Article Construction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The geotechnical section provides geotechnical services for the department including laboratory and field testing as well as subsurface drilling. This section obtains and interprets the subsurface information needed to design highways and bridges. Soils and Geology personnel also investigate various geotechnical matters including foundation stability and settlement of embankments, slide corrections, subgrade and base stabilization, bridge and wall foundations, sinks and mine subsidence, and the use of new technology and products. Geotechnical serves as a contact regarding geotechnical problems, new products, specifications, training programs and implementation of new products and procedures. This section also participates in proficiency sample programs and inspections by the National Institute of Standards and Technology.

Geotechnical Engineering Guidelines
Correlation of Plasticity Index to Angle of Internal Friction 182k 321 Drill in Creek.JPG
Corebox 14k
Field Guide 31k
Fill Slope Guide 16k
Geophysical Methods FHWA 1998 598k 321 Mine Map.JPG 321 Driller.JPG
GeoTechnical Section Guidelines 1 meg
Modified State Plane 21k
MoDOT Field Log Protocol 97k
P-Y Curve Criteria 32k
RQD 18k 321 Slide.jpg
Seismic Procedure 2.8 meg
Shale Split Spoon Procedure 21k
Soil and Rock Properties FHWA 2002 7.6 meg
Soil Profile Type 22k 321 Drillers.jpg
Soil Survey 20k
Subsurface Investigation Manual FHWA 1997 27 meg
Towers 1.9 meg
Versa Drill 50 Blow Procedure 11k

Contact Information:
MoDOT Construction and Materials Division
P. O. Box 270
Jefferson City, MO 65102
Phone: (573) 526-5730
Fax: (573) 526-4345

Articles in "321 Geotechnical Engineering"

The following 3 pages are in this category, out of 3 total.