Difference between revisions of "Category:400 FLEXIBLE PAVEMENT"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m
 
(11 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{|border="4"  
+
[[image:400 Flexible Pavement.jpg|right|400px]]
 +
{|style="padding: 0.3em; margin-right:10px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="170px" align="left"  
 +
|-
 +
|[[image:safety begins with me.jpg|165px|center]]
 +
|-
 +
|'''Safety Video'''
 
|-
 
|-
|style="background:yellow"|'''[[Key Points 400 Flexible Pavement|Key Points]]'''
+
|[[media:132 Asphalt Operations.wmv|Asphalt Operations]]
 
|}
 
|}
  
[[image:400 Flexible Pavement.jpg|right|400px]]
+
Pavements are [[:Category:450 Bituminous Pavement Design|designed]], [[:Category:460 General Requirements for Bituminous Construction|constructed]], and [[:Category:470 Bituminous Asphalt Maintenance|maintained]] to provide adequate support for loads imposed by traffic, and to provide a uniformly firm, stable, smooth, all-weather surface. To achieve these objectives, the [[Other Aspects of Pavement Design#Soil Characteristics|subgrade]], [[:Category:300 BASES|base]], [[:Category:605 Underdrainage|underdrainage]] and pavement must function together properly so that the pavement will not fail under the predicted traffic loads.  Pavements are either flexible or rigid.
 +
 
 +
Flexible pavements consist of a mixture of liquid asphalt and aggregate.  There are three general categories of asphalt pavement design.  Selection is based on traffic volume.
  
Pavements are [[:Category:450 Bituminous Pavement Design|designed]], [[:Category:460 General Requirements for Bituminous Construction|constructed]], and [[:Category:470 Bituminous Asphalt Maintenance|maintained]] to provide adequate support for loads imposed by traffic, and to provide a uniformly firm, stable, smooth, all-weather surface.  To achieve these objectives, the [[Soil Characteristics|subgrade]], [[:Category:300 BASES|base]], [[:Category:605 Underdrainage|underdrainage]] and pavement must function together properly so that the pavement will not fail under the predicted traffic loads.  Pavements are either flexible or rigid.
 
  
Flexible pavements consist of a mixture of liquid asphalt and aggregate.  There are three general categories of asphalt pavement design.  Selection is based on traffic volume.
 
 
*Plant Mix Surface Leveling mixes are our least stable mixes and are used only on lower volume roads where rutting is not expected to be an issue.  The general requirements for this mix type can be found in [[:Category:402 Bituminous Surface Leveling|Bituminous Surface Leveling]].
 
*Plant Mix Surface Leveling mixes are our least stable mixes and are used only on lower volume roads where rutting is not expected to be an issue.  The general requirements for this mix type can be found in [[:Category:402 Bituminous Surface Leveling|Bituminous Surface Leveling]].
 
*Plant Mix Bituminous Bases and Pavements have higher stability requirements than surface leveling and are used on medium volume roads.  The general requirments for these mix types can be found in [[:Category:401 Bituminous Base and Pavement|Bituminous Base and Pavement]].
 
*Plant Mix Bituminous Bases and Pavements have higher stability requirements than surface leveling and are used on medium volume roads.  The general requirments for these mix types can be found in [[:Category:401 Bituminous Base and Pavement|Bituminous Base and Pavement]].
 
*Superpave is the most stable of all asphalt pavement types and is used on the highest volume roads.  The general requirements for Superpave mixes can be found in [[:Category:403 Asphaltic Concrete Pavement|Asphaltic Concrete Pavement]].
 
*Superpave is the most stable of all asphalt pavement types and is used on the highest volume roads.  The general requirements for Superpave mixes can be found in [[:Category:403 Asphaltic Concrete Pavement|Asphaltic Concrete Pavement]].
 +
 +
{|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#ffddcc" width="210px" align="right"
 +
|-
 +
|'''Pavement Rehabilitation, Guide'''
 +
|-
 +
|[http://library.modot.mo.gov/RDT/reports/Ri00008/Brf02013.pdf Summary 2003]
 +
|-
 +
|[http://library.modot.mo.gov/RDT/reports/Ri00008/RDT02013.pdf Report 2002]
 +
|-
 +
|'''See also:''' [https://www.modot.org/research-publications Research Publications]
 +
|}
  
  
Line 21: Line 37:
 
<categorytree mode=all>407 Tack Coat</categorytree>
 
<categorytree mode=all>407 Tack Coat</categorytree>
 
<categorytree mode=all>408 Prime Coat</categorytree>
 
<categorytree mode=all>408 Prime Coat</categorytree>
 +
{|style="padding: 0.3em; margin-left:7px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="280px" align="right"
 +
|-
 +
|EPG articles are not referenced as "sections" but as EPG XXX.X or "articles" to avoid confusion with MoDOT specs (which are contractually binding).
 +
|}
 
<categorytree mode=all>409 Seal Coat</categorytree>
 
<categorytree mode=all>409 Seal Coat</categorytree>
 
<categorytree mode=all>413 Surface Treatments and Preventive Maintenance</categorytree>
 
<categorytree mode=all>413 Surface Treatments and Preventive Maintenance</categorytree>
Line 26: Line 46:
 
<categorytree mode=all>460 General Requirements for Bituminous Construction</categorytree>
 
<categorytree mode=all>460 General Requirements for Bituminous Construction</categorytree>
 
<categorytree mode=all>470 Bituminous Asphalt Maintenance</categorytree>
 
<categorytree mode=all>470 Bituminous Asphalt Maintenance</categorytree>
 +
<categorytree mode=all>Shoulder Maintenance</categorytree>

Latest revision as of 14:58, 18 August 2020

400 Flexible Pavement.jpg
Safety begins with me.jpg
Safety Video
Asphalt Operations

Pavements are designed, constructed, and maintained to provide adequate support for loads imposed by traffic, and to provide a uniformly firm, stable, smooth, all-weather surface. To achieve these objectives, the subgrade, base, underdrainage and pavement must function together properly so that the pavement will not fail under the predicted traffic loads. Pavements are either flexible or rigid.

Flexible pavements consist of a mixture of liquid asphalt and aggregate. There are three general categories of asphalt pavement design. Selection is based on traffic volume.


  • Plant Mix Surface Leveling mixes are our least stable mixes and are used only on lower volume roads where rutting is not expected to be an issue. The general requirements for this mix type can be found in Bituminous Surface Leveling.
  • Plant Mix Bituminous Bases and Pavements have higher stability requirements than surface leveling and are used on medium volume roads. The general requirments for these mix types can be found in Bituminous Base and Pavement.
  • Superpave is the most stable of all asphalt pavement types and is used on the highest volume roads. The general requirements for Superpave mixes can be found in Asphaltic Concrete Pavement.
Pavement Rehabilitation, Guide
Summary 2003
Report 2002
See also: Research Publications


EPG articles are not referenced as "sections" but as EPG XXX.X or "articles" to avoid confusion with MoDOT specs (which are contractually binding).